Automation and modeling in design and management - Эдиторум

Scientific and technical papers reflecting the results of research conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
For publication in the journal papers are submitted electronically:

• the text of the paper signed by all authors (program database file (PDF));

• the text of the paper (DOC file; Word-2010);

• expert opinion on the possibility of publishing the paper content in open access (PDF);

• written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);

• a package of figures (TIFF, JPG files with 300 dpi at least).

After the paper is accepted for publication, the author/authors and the founder sign a License agreement.

The text of the paper should be carefully checked by the author.

All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The members of the editorial board of the journal, who have knowledge and experience in the research area close to the topic of the author’s manuscript, are mainly involved as reviewers. Reviewers’ recommendations are the basis for the decision to publish the paper. Specialists working in the same institution as the author (authors) of the paper cannot be reviewers. The papers should be reviewed within 10 days of submission. If the review recommends paper revision or the paper is rejected, a copy of the review is sent to the author. Reviews of papers are kept in the editorial office for 5 years. When a corresponding request is received by the editorial office, copies of the reviews are sent to the Ministry of Science and Higher Education of the Russian Federation.

Files submitted to the editorial office should be named after the first author (for example, Ivanov_I.I.).

The paper for this journal should be 6-10 pages of A4 format (automatic hyphenation mode), including graphs, figures, tables and references.

8. The text of the paper should be 1- spaced and contain:

in the upper left corner - UDC (letter height is 12 pt);
on the right – initials, surname of the author (authors) separated by commas (letter height is 12 pt);

title of the paper (uppercase letter height is 14 pt, bold, center alignment);

abstract (4 to 6 lines; letter height is 10 pt; paragraph is 7 mm);

keywords (6 – 8 words; letter height is 10 pt; paragraph is 7 mm);

paper text (letter height is 12 pt; paragraph is 10 mm; margins: top, bottom, right, left - 20 mm);

a reference list (letter height is 10 pt; the title is in uppercase letters);
information on the authors: full name, academic degree, academic title, position, place of work, work address, work and/or home phone numbers, e-mail (letter height is 10 pt, the title is in uppercase letters, right alignment);

abstract (letter height is 10 pt; paragraph is 7 mm).

Grant references should be given at the end of the paper (after Conclusion)

1. The title of the paper should be informative, clearly reflect its content in a few words (mostly keywords). The abstract should make it possible to understand the main content of the article, its relevance and whether the reader should refer to its full text or not (one of the ways to write an abstract is to give a brief summary of the paper structure, including aims, objectives, methods and results). The summary is translated into English in the editorial office of the journal and is aimed to inform the foreign reader about the content of the paper. It should be informative (contain concrete information), original (does not duplicate the results obtained and published earlier), content-related (include the aim, methods, study progress, results, brief conclusions), structured (follow the description logic of the paper results) and concise (15 – 20 lines).
2. The text of the paper should be well-structured. The introduction should contain information on the problem statement and possible application of the results in practice. The main part should have several sections (with headings) and contain a problem statement and the method proposed of its solution; the difference between the proposed statement of the problem from the already known; the advantage of the developed method in comparison with the existing (it should contain an example confirming the efficiency of the proposed solution). The paper should be completed with a meaningful discussion (conclusion) of the results.
3. Formulas, letters (uppercase and lowercase, Latin and Greek alphabets), numbers, and other characters should be readable. All Latin letters are typed in italics, all Russian and Greek – upright. Formulas should be in 12 points Microsoft Equation 3.0 (Word-2010).
4. Figures, graphs, charts, diagrams, tables and other graphics should be embedded to the text (after their mentioning) and should have legends (letter height is 10 pt, center alignment), and tables should have headings. Figures can be inserted in the text with runaround. Lettering in figures should be 10 points in Times, upright, starting with a capital letter. Formulas should be in a word processor compatible with MS Word 2010.
5. Reference list should be in accordance with GOST R 7.0.100-2018 Bibliographic Record. Bibliographic Description and contain at least 10 references not earlier than 1970 and mainly presented in the international databases Scopus and/or Web of Science.
6. All measurements should be in SI units.
7. The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal.

16. If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.

17. Authors of papers are not paid a fee; papers are published free of charge.

18. The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.

Guidelines for the preparation and execution of scientific articles in journals indexed in international scientometric databases

Article template

The model author's contract

The order of publication of articles

Guidelines for the direction, review and publication of articles

Ethics of publication

he editorial board of online edition Automation and Modelling in Design and Management adheres its activities to the Russian Federation law of 27.12.1991 № 2121-1 (updated of 03.07.2016) "On Mass Media", Regulation "On the journal Automation and Modelling in Design and Management", as well as the recommendations and standards of the Committee on Publication Ethics (COPE’s Best Practice Guidelines for Journal Editors,http://publicationethics.org/).

The editorial board of the journal does its best to comply with ethical standards adopted by the international scientific community, studies and takes into account the valuable experience of reliable international journals and publishers.

The Declaration of Publication Ethics contains the general principles and rules of relationship of participants involved in scientific publications (authors, reviewers, editors, publisher).

RESPONSIBILITIES OF THE EDITOR

Manuscript Assessment

The papers submitted to the journal should contain the scientific research results obtained by the authors, which have not been published anywhere before.

Reviewing papers submitted to the editorial office of the journal is aimed at ensuring the high quality of scientific papers published in the journal. All papers submitted to the editorial office for publication are reviewed.

The scientific paper undergoes peer-review twice: internal peer-review is carried out by the experts of the journal editorial board; external peer-review is done by experts who evaluate the level and clarity of presentation of the submitted material, whether it fits to the journal’s aim and scope, if your work is new and original as well as the conclusions are reliable. Reviewers' recommendations are the basis for the decision to publish the paper. The paper can be rejected both at the stages of internal and external peer-review.

The editorial board is fully responsible for the decision to publish the paper.

The editorial board of the journal makes its decision on publication, adhering to the editorial policy of the journal, taking into account current copyright laws, evaluating manuscripts according to their scientific content. In case of a positive decision of the reviewers and the editorial board, the paper is published in the next issue of the journal; authors hold copyright.

In case of rejection to publish, the author is given feedback with reasoned decision. The manuscript of the rejected paper is kept in the editorial office for at least 1 year. The paper review is sent to the author without the name of the reviewer but indicating the period during which the author can give his answer to the review. In case of giving sound explanation by the author, a second peer-review is carried out, and the decision to publish the paper is made again.

Confidentiality

The editor and editorial staff are not entitled to:

• to disclose information about a submitted manuscript to anyone other than the corresponding authors, reviewers, other editorial advisers and, if required, the publisher;

• to use unpublished materials of the submitted manuscript without the author’s permission.

Conflict of Interest

In case of any conflict of interest based on competitiveness, cooperation or other kinds of relations with one of the authors, companies or institutions associated with the submitted manuscripts, the editor sends the manuscript for reviewing to another member of the editorial board.

In case of complains on violation of publishing ethics concerning the submitted manuscript or published article, the editor together with the publisher should take adequate measures. Every report of unethical conduct should be considered, even if it comes years after the publication of the article. If the complaint is supported by the editorial board of the journal, appropriate corrections, denials or apologies should be published.

Review Storage and Provision

In accordance with the requirements of the Ministry of Education and Science of the Russian Federation, reviews of scientific papers are stored in the journal office for at least 5 years and can be provided to the Ministry of Education and Science of the Russian Federation upon request. If the paper is rejected, the authors are sent a review of the paper containing the reasons for the rejection to be published in the journal.

RESPONSIBILITIES OF PEER REVIEWERS

Contribution to Editorial Decisions

The reviewer evaluation contributes to making editorial decisions, as well as to improving the quality of the published article through the cooperation of the editor and the author.

When discussing the author's response to the review, the reviewer has the right to participate in the debate.

Rapid Decision Making

The reviewer should inform the editor and excuse himself from the review process if he feels unqualified to review the research presented in the paper, or he knows that he cannot meet the deadline.

Confidentiality

Any manuscript submitted for review should be treated as a confidential document. It is not acceptable to show it to other reviewers or discuss it with other experts without the permission of the editor-in-chief.

Standards of Objectivity

Reviewers should express their opinion clearly and reasonably: reviews of scientific works should be objective and do not contain personal criticism of the author.

Authentication of References

Reviewers should:

• analyze the sources used by the author of the paper, as well as the quality of bibliographic references of the citations used in the paper;

• identify published materials in a peer-reviewed manuscript that are cited but not bibliographically referred by the author;

• draw the editor's attention to significant or partial similarities with another paper which is familiar to the reviewer.

Information Disclosure and Conflict of Interest

Confidential data or ideas, which the reviewer learns during the review, should remain confidential and should not be used for personal gain or transferred to third parties. Reviewers should not be involved in the review and evaluation of manuscripts in which the reviewers are personally interested. Unpublished manuscript should not be used by the reviewer in his own research without the written permission of the author.

RESPONSIBILITIES OF AUTHORS

Reporting Standards

Authors should provide reliable results; objectively assess the significance of their research. The data of the research should be clearly presented in the paper, containing sufficient information so that others could replicate the experiments of the authors.

Before the paper is submitted to the editorial office for consideration, authors should obtain a written permission (expert report) of the organization to which they are affiliated for using the paper content.

Authors can give information about the funding of the research, which results it describes.

Data Access and Storage

Authors may be asked to provide initial data for editorial review. They should be ready to provide open access to such data if required within a reasonable period of time after publication.

Originality and Plagiarism

Authors should submit only original papers. When using text or graphic information of third parties or from their own but already published papers, references to relevant publications or written permission of the author are required. While reviewing the submitted papers, the editorial board screens them for unoriginal material.

Duplicate, redundant and competitive publications

Authors should indicate in the abstract that their paper is published for the first time. If the parts of the manuscript have been previously published in another paper, authors are encouraged to refer to the prior paper and show the significant difference between the new submission and the previous paper. Verbatim copying of own works and their paraphrasing are unacceptable; they can be used only as a basis for new conclusions.

Submitting an article to more than one journal is considered unethical and unacceptable.

Authentication of References

Authors should acknowledge the contribution of other persons who have influenced the study. Bibliographic references to the works used are considered necessary. Information received from third parties privately should not be used in the manuscript without their written permission.

Authorship

The list of authors is limited to those who have made a significant contribution to the research, the progress and results of which are described in the paper. All those who have contributed substantially should be listed as co-authors. The article may contain information about the participants of the research project. The corresponding author should ensure that the names of all co-authors and participants of the project are listed, and that all co-authors have given their permission to its publication, having read and approved the final manuscript before the submission.

Participants of the research, according to which the scientific paper was prepared, but not included in the number of co-authors of the paper, should be listed separately after "Conclusion".

Quality of Submitted Manuscript

The paper should be prepared in accordance with the requirements of the journal editorial board. The authors should contact the editorial board to deviate from these requirements. The information provided about the authors should be reliable. In case of any changes in the information, the authors should notify the editor.

Glaring Errors in Published Papers

If the author finds a glaring error or inaccuracy in his published article, he should immediately inform the editor or publisher of the journal and assist them in eliminating or correcting the error.

If the editor or publisher learns from a third party or from the publications of other authors that the paper published in the journal contains glaring errors, the author should immediately eliminate or correct them, or prove the correctness of the original article to the editorial board. If the fact that the published article has glaring errors is confirmed, the editorial office should publish information on it.

Publication process

Paper Publication Process

1. Including a set of documents for publication from the author into the editorial database. The author can send these documents by e-mail or to the electronic edition of the journal (on the website).

2. Checking whether the materials submitted by the authors for paper publication are complete.

3. Screening manuscripts for unoriginal material using "Antiplagiat" system. The maximum permissible level of references cited is 20% of the whole text.

4. Peer reviewing of the paper by the members of the editorial board or by third-party expert referees.

5. Technical and editorial support of the paper reviewing.

6. Informing the authors about the need to revise the material of the paper (if there is a reviewer’s comment) or about the rejection to publish the paper in the journal (by e-mail).

7. Checking of the revisions made by the authors based on the reviewer’s comments (if any).

8. Scientific and literary editing of the electronic versions of papers, providing authors with the necessary assistance to improve the structure of the paper, the choice of terms, illustrations, adjusting the reference list in accordance with GOST R 7.0.100-2018 " Bibliographic Record. Bibliographic Description. General requirements and rules of making».

9. Checking in the original sources the correctness of cited quotations and digital data, using and spelling of names and technical terms, measurement units, compliance of characters with their designations, standards or adopted in the scientific literature norms.

10. Approval of the paper text after editing by e-mail.

11. Translation of the paper title, authors' names, abstract, keywords, information about the authors and references into English.

12. Preparation of the electronic version of the license agreement between the editorial board and the authors concerning the processing of authors’ personal data, the metadata of published paper to assign ID DOI (Digital Object Identifier) in order to provide Internet users with further opportunity to search, view and use the paper for informational, scientific and educational purposes (for papers advised by reviewers for publication).

13. Making a print license agreement between the editorial board and the authors and sending it by mail.

14. Correspondence with the authors of the paper (registration of the license agreement with the authors).

15. Registration of the paper authors and its metadata, sending it to CrossRef, and assignment of DOI to the scientific publication. Putting information on DOI into the print article.

16. Making up an electronic layout of the papers and the journal.

17. Make up proof of the journal layout before sending it in print.

18. Getting an approval of the editor-in-chief for the journal layout.

19. Circulating the journal and posting it on the website.

20. Posting the electronic version of thejournal in Russian State Library (https://www.rsl.ru/), Scientific e-library (https://elibrary.ru/defaultx.asp), Scientific Publishing Center INFRA-M (https://naukaru.ru/ru/nauka/), electronic edition of the journal (https://bstu.editorum.ru/ru/nauka/journal/78/view), and online scientific library CyberLeninka (https://cyberleninka.ru)

21. Posting the journal on the website of the Russian Book Chamber and the Russian State Library (oek.rsl.ru site). A mandatory electronic copy of the publication.

22. Distribution of the journal to subscribers, customers and mandatory print copies to the Russian Book Chamber.

Article retraction process

List of retracted articles As of 01.01.2021 the articles of the publication were not retracted.

The subscription and the acquisition

The subscription and the acquisition The magazine is distributed by subscription, which for 2022 can be issued on the website of the "United Catalog" Press of Russia" www.pressa-rf.ru.

You can buy the magazine from the publisher.

Contacts:

Morozova Anna Valentinovna

Head of the Office of BSTU Scientific Periodicals;

Phone : +7-919-202-70-07;

E-mail:niotiostu@gmail.com

Publication fee

Publication fee is not charged.

Editorial collegium

Sigov Alyeksandr — Chairman of Editorial Committee
MIREA – Russian Technological University ( President)
Moskva, Moscow, Russian Federation

Averchenkov Andrey — Chairman Assistant
Bryansk State Technical University (department “Computer technologies and Systems”, Head)
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-0196-1332

Fedonin Oleg — Chairman Assistant
Bryansk State Technical University ( Rector, Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-3823-0501

Averchenkov Vladimir — Editor-in-chief
Bryansk State Technical University (kafedra «Komp'yuternye tehnologii i sistemy», Professor)
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation

Bobyr Maksim — Editorial Committee
Yugo-Zapadnyy gosudarstvennyy universitet (kafedra "Vychislitel'noy tehniki", professor)
professor
Kursk, Kursk, Russian Federation

Bochkarev Petr — Editorial Committee
Yuri Gagarin State Technical University of Saratov (kafedra «Tehnicheskaya mehanika i detali mashin», professor)
doctor of technical sciences
Saratov, Saratov, Russian Federation

Dolgov Yuriy — Editorial Committee
Transnistrian State University named after T.G. Shevchenko (kafedra "Informacionnyh tehnologiy i avtomatizirovannogo upravleniya proizvodstvennymi processami", zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Tiraspol, Transnistria

Eremenko Vladimir — Editorial Committee
Turgenev Orel State University (kafedra «Informacionnaya bezopasnost'», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Orel, Russian Federation

Ivaschuk Ol'ga — Editorial Committee
Belgorod State University (kafedra "Informacionnyh i robototehnicheskih sistem", zaveduyuschaya kafedroy)
doctor of technical sciences
professor
Belgorod, Belgorod, Russian Federation

Inkov Yuriy — Editorial Committee
RUSSIAN UNIVERSITY OF TRANSPORT (kafedr «Elektropoezda i lokomotivy», professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation

Karpenko Anatoliy — Editorial Committee
Bauman Moscow State Technical University (kafedra "Sistemy avtomatizirovannogo proektirovaniya", zaveduyuschiy kafedroy)
doctor of physical and mathematical sciences
professor
Moscow, Moscow, Russian Federation

Kvyatkovskaya Irina — Editorial Committee
Astrakhan State Technical University (Doctor of Technical Sciences, Professor; Head of the Department of Higher and Applied Mathematics )
doctor of technical sciences
professor
Astrahan', Astrakhan, Russian Federation
ORCID:0000-0001-7205-7231

Kravec Alla Grigor'evna — Editorial Committee
Volgograd State Technical University; Dubna State University (Doctor of Sciences in Technology, Professor; Professor of the Department of Computer Aided Design and Exploratory Design Systems; Volgograd State Technical University; Professor of the Department of System Analysis and Control )
doctor of technical sciences
professor
Volgograd, Volgograd, Russian Federation

Kureychik Vladimir — Editorial Committee
Southern Federal University (Kafedra "Sistem avtomatizirovannogo proektirovaniya", Head of department)
doctor of technical sciences
professor
Taganrog, Rostov-on-Don, Russian Federation

Lantsov Vladimir — Editorial Committee
Vladimir State University named after Alexander and Nikolay Stoletovs (Computer Engineering and System Control Department, Chief)
doctor of technical sciences
professor
Vladimir, Vladimir, Russian Federation

Makarova Elena — Editorial Committee
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences
docent
Sankt-Peterburg, St. Petersburg, Russian Federation

Meshcheryakov Viktor — Editorial Committee
Lipetsk State Technical University (kafedra «Elektroprivod», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Lipetsk, Lipetsk, Russian Federation

Mikhalchenko Sergey — Editorial Committee
Tomsk State University of Control Systems and Radioelectronics (kafedra «Promyshlennaya elektronika», zaveduyuschiy kafedroy)
doctor of technical sciences
docent
Tomsk, Tomsk, Russian Federation

Nikitin Viktor — Editorial Committee
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences
docent
Sankt-Peterburg, St. Petersburg, Russian Federation

Noskov Sergey — Editorial Committee
Irkutsk State University of Railway Transport (Doctor of Technical Sciences, Professor; Professor of the Department of Information Systems and Information Security )
doctor of technical sciences
professor
Irkutsk, Irkutsk region, Russian Federation

Petreshin Dmitriy — Editorial Committee
Bryansk State Technical University (Educational-Scientific Technological Institute, Director)
employee
doctor of technical sciences
professor
Bryansk, Bryansk, Russian Federation

Podvesovskiy Aleksandr — Editorial Committee
Bryansk State Technical University (department “Computer Science and Software”, Head)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation

Pyl'kin Aleksandr — Editorial Committee
Ryazanskiy gosudarstvennyy radiotehnicheskiy universitet (Kafedra "Vychislitel'noy i prikladnoy matematiki", professor)
doctor of technical sciences
professor
Ryazan, Orel, Russian Federation

Skrypnikov Aleksey — Editorial Committee
FGBOU VO «Voronezhskiy gosudarstvennyy universitet inzhenernyh tehnologiy" (Kafedra "Informacionnaya bezopasnost'", zaveduyuschiy kafedroy)
employee
doctor of technical sciences
professor
Voronezh, Voronezh, Russian Federation

Sosnin Petr — Editorial Committee
Ulyanovsk State Technical University (kafedra «Vychislitel'naya tehnika», zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Vladimir, Russian Federation

Fedyaeva Galina — Editorial Committee
Bryanskiy gosudarstvennyy tehnicheskiy universitet

Feofanov Aleksandr — Editorial Committee
Moscow State University of Technology «STANKIN» (department engineering graphics, prof)
doctor of technical sciences
Moskva, Moscow, Russian Federation

Kheyfets Mikhail — Editorial Committee
State Scientific Institution “Institute of Applied Physics of the National Academy and Sciences of Belarus” ( Institute director)
doctor of technical sciences
professor
Minsk, Belarus

Chepchurov Mihail — Editorial Committee
Belgorod State Technological University named after V.G. Shukhov (Department of mechanical engineering technology, Professor of the Department)
doctor of technical sciences
docent
Belgorod, Belgorod, Russian Federation

Sheptunov Sergey — Editorial Committee
Institute of Design-Technological Informatics of the Russian Academy of Sciences ( direktor)
doctor of technical sciences
Moskva, Moscow, Russian Federation

Yarushkina Nadezhda — Editorial Committee
Ulyanovsk State Technical University ( Rektor)
Ul'yanovsk, Ulyanovsk, Russian Federation

Andreas Pester — Editorial Committee
Carinthi University of Applied Science ( prof/)
Austria

Zaharova Alena — Deputy Editor-in-chief
Institute of Control Sciences named after V.A. Trapeznikov, Russian Academy of Sciences (Cyberphysical Systems Laboratory, Chief Researcher)
doctor of technical sciences
docent
Moskva, Moscow, Russian Federation

Malahanov Aleksey — Deputy Editor-in-chief
Bryanskiy gosudarstvennyy tehnicheskiy universitet
employee
Bryansk, Bryansk, Russian Federation

Podvesovskiy Aleksandr — Deputy chief editor
Bryansk State Technical University (department “Computer Science and Software”, Head)
candidate of technical sciences
docent
Bryansk, Bryansk, Russian Federation

Pugachev Aleksandr — Deputy Editor-in-chief
Bryansk State Technical University (Department «Industrial electronics and electrical engineering", Head of the Department)
employee
doctor of technical sciences
docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923

MATHEMATICAL MODELING, NUMERICAL METHODS AND PROGRAM COMPLEXES

Articles of the rubric

MANAGEMENT IN SOCIAL AND ECONOMIC SYSTEMS

Articles of the rubric

AUTOMATION AND CONTROL OF TECHNOLOGICAL PROCESSES AND PRODUCTION, AUTOMATED DESIGN SYSTEMS

Articles of the rubric

ELECTROTECHNICAL COMPLEXES AND SYSTEMS

Articles of the rubric

MANAGEMENT IN ORGANIZATIONAL SYSTEMS

Articles of the rubric

COMPUTER MODELING AND DESIGN AUTOMATION

Articles of the rubric

MATHEMATICAL AND COMPUTER MODELING

Articles of the rubric

ELECTRICAL COMPLEXES AND SYSTEMS

Articles of the rubric

Publisher

Bryansk State Technical University

Founder

Bryansk State Technical University

The certificate of registration(online)

Эл № ФС77-73848

Date of registration of the certificate(online)

05.10.2018

Description of the journal

Scientific and technical journal «Automation and Modelling in Design and Management» is issued as:

- online edition (https://aimpu.ru/; ISSN 2658-6436; the publisher and the founder is Bryansk State Technical University; certificate of mass media registration in the Federal Service for Supervision of Communications, Information Technologies and Mass Communication El № FS77-73848 from 05.10.2018);

- periodical printed edition identical to online edition (ISSN 2658-3488; the publisher and the founder is Bryansk State Technical University; certificate of mass media registration in the Federal Service for Supervision of Communications, Information Technologies and Mass Communication PI № FS 77-73192 from 02.07.2018).

The mission of the journal is to provide open platform for original, firstly published research results in the field of mathematical modelling, automation of technological processes and productions, automated systems of design and management which contributes to advancement of the best domestic and foreign practices in these fields.

Editorial Policy of the Journal

The editorial policy of the journal is based on the following principles:

objective and impartial selection of papers for publishing;
high demands for the quality of scientific research;
compliance with the reliability, scientific significance and relevance of published papers;
collective character of making decisions about the publication of papers;
comprehensive and efficient communication with authors;
strict compliance with copyright and editorial ethics;
accurate observation of journal issues schedule.

The materials submitted by authors for publishing must meet the following requirements: the relevance of the topic, the scientific novelty of the research, the originality of the research problem and the applied research methods, the high scientific and practical significance of the results obtained. Papers are accepted for publication in Russian and English.

The materials submitted to publication are initially selected for compliance with the declared scientific areas of the journal, the general content requirements and the requirements for providing references. If the paper passes initial selection, it is sent for review.

After the review is completed, the author is sent a text of the review and a copy of the manuscript with the comments of the reviewer and the scientific editor for revision.

The editorial board has the right not to publish articles based on the results of the review, inconsistencies of the article to the journal areas and also because of a poor quality of the material preparation.

The editorial board is responsible for the preparation of the article for publishing, ensuring a fair review, but is not responsible for the accuracy of the data provided by authors and the correctness of citing.

The decision to publish or reject the materials submitted to the publication is made by the editorial board in accordance with the Declaration of Publication Ethics.

Articles are permanently accepted for publication in the journal. The editorial board independently decides on the order and time of papers publication, based on their scientific significance, the topic of each issue, and the quality of preliminary preparation of manuscripts.

Papers are published in Russian and English.

Category 12+.

License Agreement No. 124-03/2019 dated March 27, 2019 "On including the journal Automation and Modelling in Design and Management into the Russian Science Citation Index".

Bryansk State Technical University got its own DOI in February, 2018, and now it is registered as a separate publisher by the agency Crossref (Bryansk State Technical University).

Journal articles are licensed under the CC BY 4.0 Creative Commons Attribution 4.0 License.

Manuscript guidelines

RULES

of submission, reviewing and publication of papers in Automation and Modelling in Design and Management

Scientific and technical papers reflecting the results of research conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
For publication in the journal papers are submitted electronically:

• the text of the paper signed by all authors (program database file (PDF));

• the text of the paper (DOC file; Word-2010);

• expert opinion on the possibility of publishing the paper content in open access (PDF);

• written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);

• a package of figures (TIFF, JPG files with 300 dpi at least).

After the paper is accepted for publication, the author/authors and the founder sign a License agreement.

The text of the paper should be carefully checked by the author.

All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The members of the editorial board of the journal, who have knowledge and experience in the research area close to the topic of the author’s manuscript, are mainly involved as reviewers. Reviewers’ recommendations are the basis for the decision to publish the paper. Specialists working in the same institution as the author (authors) of the paper cannot be reviewers. The papers should be reviewed within 10 days of submission. If the review recommends paper revision or the paper is rejected, a copy of the review is sent to the author. Reviews of papers are kept in the editorial office for 5 years. When a corresponding request is received by the editorial office, copies of the reviews are sent to the Ministry of Science and Higher Education of the Russian Federation.

Files submitted to the editorial office should be named after the first author (for example, Ivanov_I.I.).

The paper for this journal should be 6-10 pages of A4 format (automatic hyphenation mode), including graphs, figures, tables and references.

8. The text of the paper should be 1- spaced and contain:

in the upper left corner - UDC (letter height is 12 pt);
on the right – initials, surname of the author (authors) separated by commas (letter height is 12 pt);

title of the paper (uppercase letter height is 14 pt, bold, center alignment);

abstract (4 to 6 lines; letter height is 10 pt; paragraph is 7 mm);

keywords (6 – 8 words; letter height is 10 pt; paragraph is 7 mm);

paper text (letter height is 12 pt; paragraph is 10 mm; margins: top, bottom, right, left - 20 mm);

a reference list (letter height is 10 pt; the title is in uppercase letters);
information on the authors: full name, academic degree, academic title, position, place of work, work address, work and/or home phone numbers, e-mail (letter height is 10 pt, the title is in uppercase letters, right alignment);

abstract (letter height is 10 pt; paragraph is 7 mm).

Grant references should be given at the end of the paper (after Conclusion)

1. The title of the paper should be informative, clearly reflect its content in a few words (mostly keywords). The abstract should make it possible to understand the main content of the article, its relevance and whether the reader should refer to its full text or not (one of the ways to write an abstract is to give a brief summary of the paper structure, including aims, objectives, methods and results). The summary is translated into English in the editorial office of the journal and is aimed to inform the foreign reader about the content of the paper. It should be informative (contain concrete information), original (does not duplicate the results obtained and published earlier), content-related (include the aim, methods, study progress, results, brief conclusions), structured (follow the description logic of the paper results) and concise (15 – 20 lines).
2. The text of the paper should be well-structured. The introduction should contain information on the problem statement and possible application of the results in practice. The main part should have several sections (with headings) and contain a problem statement and the method proposed of its solution; the difference between the proposed statement of the problem from the already known; the advantage of the developed method in comparison with the existing (it should contain an example confirming the efficiency of the proposed solution). The paper should be completed with a meaningful discussion (conclusion) of the results.
3. Formulas, letters (uppercase and lowercase, Latin and Greek alphabets), numbers, and other characters should be readable. All Latin letters are typed in italics, all Russian and Greek – upright. Formulas should be in 12 points Microsoft Equation 3.0 (Word-2010).
4. Figures, graphs, charts, diagrams, tables and other graphics should be embedded to the text (after their mentioning) and should have legends (letter height is 10 pt, center alignment), and tables should have headings. Figures can be inserted in the text with runaround. Lettering in figures should be 10 points in Times, upright, starting with a capital letter. Formulas should be in a word processor compatible with MS Word 2010.
5. Reference list should be in accordance with GOST R 7.0.100-2018 Bibliographic Record. Bibliographic Description and contain at least 10 references not earlier than 1970 and mainly presented in the international databases Scopus and/or Web of Science.
6. All measurements should be in SI units.
7. The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal.

16. If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.

17. Authors of papers are not paid a fee; papers are published free of charge.

Guidelines for the preparation and execution of scientific articles in journals indexed in international scientometric databases

Article template

The model author's contract

The order of publication of articles

Guidelines for the direction, review and publication of articles

Ethics of publication

The Declaration of Publication Ethics contains the general principles and rules of relationship of participants involved in scientific publications (authors, reviewers, editors, publisher).

RESPONSIBILITIES OF THE EDITOR

Manuscript Assessment

The papers submitted to the journal should contain the scientific research results obtained by the authors, which have not been published anywhere before.

The editorial board is fully responsible for the decision to publish the paper.

Confidentiality

The editor and editorial staff are not entitled to:

• to disclose information about a submitted manuscript to anyone other than the corresponding authors, reviewers, other editorial advisers and, if required, the publisher;

• to use unpublished materials of the submitted manuscript without the author’s permission.

Conflict of Interest

Review Storage and Provision

RESPONSIBILITIES OF PEER REVIEWERS

Contribution to Editorial Decisions

The reviewer evaluation contributes to making editorial decisions, as well as to improving the quality of the published article through the cooperation of the editor and the author.

When discussing the author's response to the review, the reviewer has the right to participate in the debate.

Rapid Decision Making

The reviewer should inform the editor and excuse himself from the review process if he feels unqualified to review the research presented in the paper, or he knows that he cannot meet the deadline.

Confidentiality

Standards of Objectivity

Reviewers should express their opinion clearly and reasonably: reviews of scientific works should be objective and do not contain personal criticism of the author.

Authentication of References

Reviewers should:

• analyze the sources used by the author of the paper, as well as the quality of bibliographic references of the citations used in the paper;

• identify published materials in a peer-reviewed manuscript that are cited but not bibliographically referred by the author;

• draw the editor's attention to significant or partial similarities with another paper which is familiar to the reviewer.

Information Disclosure and Conflict of Interest

RESPONSIBILITIES OF AUTHORS

Reporting Standards

Authors can give information about the funding of the research, which results it describes.

Data Access and Storage

Authors may be asked to provide initial data for editorial review. They should be ready to provide open access to such data if required within a reasonable period of time after publication.

Originality and Plagiarism

Duplicate, redundant and competitive publications

Submitting an article to more than one journal is considered unethical and unacceptable.

Authentication of References

Authorship

Participants of the research, according to which the scientific paper was prepared, but not included in the number of co-authors of the paper, should be listed separately after "Conclusion".

Quality of Submitted Manuscript

Glaring Errors in Published Papers

If the author finds a glaring error or inaccuracy in his published article, he should immediately inform the editor or publisher of the journal and assist them in eliminating or correcting the error.

Publication process

Paper Publication Process

2. Checking whether the materials submitted by the authors for paper publication are complete.

3. Screening manuscripts for unoriginal material using "Antiplagiat" system. The maximum permissible level of references cited is 20% of the whole text.

4. Peer reviewing of the paper by the members of the editorial board or by third-party expert referees.

5. Technical and editorial support of the paper reviewing.

6. Informing the authors about the need to revise the material of the paper (if there is a reviewer’s comment) or about the rejection to publish the paper in the journal (by e-mail).

7. Checking of the revisions made by the authors based on the reviewer’s comments (if any).

10. Approval of the paper text after editing by e-mail.

11. Translation of the paper title, authors' names, abstract, keywords, information about the authors and references into English.

13. Making a print license agreement between the editorial board and the authors and sending it by mail.

14. Correspondence with the authors of the paper (registration of the license agreement with the authors).

15. Registration of the paper authors and its metadata, sending it to CrossRef, and assignment of DOI to the scientific publication. Putting information on DOI into the print article.

16. Making up an electronic layout of the papers and the journal.

17. Make up proof of the journal layout before sending it in print.

18. Getting an approval of the editor-in-chief for the journal layout.

19. Circulating the journal and posting it on the website.

21. Posting the journal on the website of the Russian Book Chamber and the Russian State Library (oek.rsl.ru site). A mandatory electronic copy of the publication.

22. Distribution of the journal to subscribers, customers and mandatory print copies to the Russian Book Chamber.

Advertisers

JOURNAL ADVERTISING

№	Advertising space type	Price (including VAT), rub./issue
1	Cover, 2nd and 4th page (advert size 280×185 mm)	10 000
2	Cover, 3rd page (advert size 280×185 mm)	8 000
3	Black-and-white, inside the journal (advert size 165×240 mm)	4 000
4	Black-and-white inside the journal (advert size 165×120 mm)	3 000
5	Black-and-white, inside the journal (advert size 165×60 mm)	2 000
6	Advert making	5 000 Rubles/advert

JOURNAL ADVERTISING ONLINE

№	Advertising space type	Price (including VAT), rub./month
1	Banner on all websites of 180×180 pixels on the right page page of the website. The banner is dynamic	4 000
2	Banner on all websites of 160×160 pixels on the right page of the website. The banner is dynamic	3 000
3	Banner interchange of 100×100 pixels with overlapping concern	1 000
4	Advert making	5 000 Rubles/Module

The journal publishes only noncommercial advertising: information on scientific developments, the work of research firms and departments of industrial enterprises and universities, arrangement and holding scientific events, etc.

Financial policy

FINANCIAL POLICY

Automation and Modelling in Design and Management has an external funding model, i.e. the preparation and publication of the journal is carried out at the expense of the founder and sponsors, funds derived from advertising, subscription and customers (individuals and legal entities) who buy journal issues.

Paper publication in the journal is free of charge.

The money received from external financing sources is spent on the following types of work:

editing and proofreading of incoming papers;

translation of paper fragments;

prepress (electronic editing and correction of formulas and figures, making quality drawings in graphics editors, making up of articles, layout of the journal and its cover, loading paper data in the information system and assignment of a DOI for each paper of the journal);

consumables for journal circulating;

payment for DOI registration of the journal and each article;

inclusion in the catalogue "Rospechat»;
payment for the electronic edition and website of the journal;
payment for connecting the journal to the international system of citation CrossRef ;
payment for postal services for the distribution of journal issues;
payment for the editorial staff work.

Article retraction process

List of retracted articles As of 01.01.2021 the articles of the publication were not retracted.

Publication fee

Publication fee is not charged.

The subscription and the acquisition

The subscription and the acquisition The magazine is distributed by subscription, which for 2022 can be issued on the website of the "United Catalog" Press of Russia" www.pressa-rf.ru.

You can buy the magazine from the publisher.

Contacts:

Morozova Anna Valentinovna

Head of the Office of BSTU Scientific Periodicals;

Phone : +7-919-202-70-07;

E-mail:niotiostu@gmail.com

Periodicity

Periodicity of journal publication is every three months – up to 50 MB (online edition), up to 100 pages (printed edition).

Journal's authors | Authors index

Kondratenko Roman Bryansk State Technical University ( Master student)

Kondratyeva Olga Saint-Petersburg State University of Aerospace Instrumentation ( post graduate student)

Kondrashov Dmitrij Bryansk State Technical University (department «Computer technologies and systems», Master)

Konopatskiy Evgeny candidate of technical sciences ,
doctor of technical sciences from 01.01.2020 until now

docent

SCOPUS: 57188826034 Researcherid: D-3235-2019 ELIBRARY: 681553 ORCID:0000-0003-4798-7458

Kopanitsa Georgy Saint-Petersburg National Research University of Information Technologies, Mechanics and Optics ( Leading researcher)
candidate of technical sciences

Kopeliovich Dmitriy Bryansk State Technical University (Engineering Center, Director)
candidate of technical sciences

docent

Kopylov Denis Moscow Aviation Institute
student

Kopylov Stepan TMH Engineering LLC ( Design Engineer)

Korostelyov Dmitry Bryansk State Technical University (department «Informatics and software», Assistant Prof.)
candidate of technical sciences

Kosmodamianskiy Andrey Russian University of Transport (Dep, "Traction Rolling-Stock", Head of the Dep, Professor)
doctor of technical sciences

professor

Krasyukov Anton National Research University of Electronic Technology ( Associate Professor)
candidate of technical sciences

docent

Krivoshlykova Ekaterina Russian New University (Department of Information Systems in Economics and Management, Master degree student)

Krivtsanov Sergei Bryansk State Technical University (kafedra «Informatika i programmnoe obespechenie», student)

Krys'ko Vadim Yuri Gagarin State Technical University of Saratov (Department «Mathematics and modeling», Head of the department)
doctor of technical sciences

Kuznetsova Nataliya Moscow State Technological University “STANKIN” ( Associate Professor)
employee
candidate of technical sciences

docent

Kuznetsova Natalia Moscow State University of Technology “STANKIN” ( Docent)
candidate of technical sciences

Kuz'menko Aleksandr Bryansk State Technical University (Department “Computer Technologies and Systems”, Associate Professor)
candidate of biological sciences

ELIBRARY: 878957 ORCID:0000-0002-3529-7575

Kulagin Alexey Moscow State University of Technology «STANKIN» ( Post graduate student)

Kurlov Aleksey Saint-Petersburg State University of Aerospace Instrumentation ( Post graduate student)

Labutin Aleksandr Ivanovskiy gosudarstvennyy himiko-tehnologicheskiy universitet (Tehnicheskaya kibernetika i avtomatika, Zaveduyuschiy kafedroy, professor)
employee
doctor of technical sciences

Editorial collegium

Sigov Alyeksandr — Chairman of Editorial Committee
MIREA – Russian Technological University ( President)

Moskva, Moscow, Russian Federation

Averchenkov Andrey — Chairman Assistant
Bryansk State Technical University (department “Computer technologies and Systems”, Head)
doctor of technical sciences

docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0003-0196-1332

Fedonin Oleg — Chairman Assistant
Bryansk State Technical University ( Rector, Professor)
doctor of technical sciences

professor
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-3823-0501

Bobyr Maksim — Editorial Committee
Yugo-Zapadnyy gosudarstvennyy universitet (kafedra "Vychislitel'noy tehniki", professor)

professor
Kursk, Kursk, Russian Federation

Inkov Yuriy — Editorial Committee
RUSSIAN UNIVERSITY OF TRANSPORT (kafedr «Elektropoezda i lokomotivy», professor)
doctor of technical sciences

professor
Moscow, Moscow, Russian Federation

Kvyatkovskaya Irina — Editorial Committee
Astrakhan State Technical University (Doctor of Technical Sciences, Professor; Head of the Department of Higher and Applied Mathematics )
doctor of technical sciences

professor
Astrahan', Astrakhan, Russian Federation
ORCID:0000-0001-7205-7231

Kureychik Vladimir — Editorial Committee
Southern Federal University (Kafedra "Sistem avtomatizirovannogo proektirovaniya", Head of department)
doctor of technical sciences

professor
Taganrog, Rostov-on-Don, Russian Federation

Makarova Elena — Editorial Committee
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences

docent
Sankt-Peterburg, St. Petersburg, Russian Federation

Nikitin Viktor — Editorial Committee
Petersburg State Transport University (kafedra «Elektricheskaya tyaga», professor)
doctor of technical sciences

docent
Sankt-Peterburg, St. Petersburg, Russian Federation

Noskov Sergey — Editorial Committee
Irkutsk State University of Railway Transport (Doctor of Technical Sciences, Professor; Professor of the Department of Information Systems and Information Security )
doctor of technical sciences

professor
Irkutsk, Irkutsk region, Russian Federation

Fedyaeva Galina — Editorial Committee
Bryanskiy gosudarstvennyy tehnicheskiy universitet

Yarushkina Nadezhda — Editorial Committee
Ulyanovsk State Technical University ( Rektor)

Ul'yanovsk, Ulyanovsk, Russian Federation

Andreas Pester — Editorial Committee
Carinthi University of Applied Science ( prof/)

Austria

Malahanov Aleksey — Deputy Editor-in-chief
Bryanskiy gosudarstvennyy tehnicheskiy universitet
employee

Bryansk, Bryansk, Russian Federation

Pugachev Aleksandr — Deputy Editor-in-chief
Bryansk State Technical University (Department «Industrial electronics and electrical engineering", Head of the Department)
employee
doctor of technical sciences

docent
Bryansk, Bryansk, Russian Federation
ORCID:0000-0002-1836-0923

Classifiers

GRNTI

Code 50.43
Name Системы автоматического управления, регулирования и контроля

Editor-in-chief of the journal

Automation and Modelling in Design and Management

Averchenkov Vladimir Ivanovich

Averchenkov Vladimir Ivanovich is Doctor of Engineering, Professor of the Department of Computer Technologies and Systems of Bryansk State Technical University; graduated from Bryansk Institute of Transport Engineering in 1970.

Averchenkov V.I. worked as the head of the following departments: Technology of Mechanical Engineering (1988-2003), Computer Technologies and Systems (2003-2017), Vice-rector for IT Development and International Cooperation (1994-2013) at Bryansk State Technical University (former Bryansk Institute of Transport Engineering); Honored Scientist of the Russian Federation (1997), Honorary Worker of Higher Professional Education (2000), awarded the Order of Friendship (2003).

Averchenkov V. I. is a well-known scientist of the country in the field of mathematical and computer modelling of production design processes in mechanical engineering and development of new advanced technologies. As a result of his scientific research there are fundamentally new approaches created to formalize methods for constructing and selecting advanced technologies that ensure the required quality of products, reducing the labor intensiveness, energy consumption, material consumption and cost of their manufacture in the conditions of automated decision-making. A number of subsystems of CAD processes, databases and expert systems for technological purposes introduced at various industrial enterprises of the country are based on the theory of structural and parametric optimization of technological objects under his supervision. A lot of specialists in the field of mechanical engineering technologies know scientific works of Professor Averchenkov V.I. on the study of the technological heredity phenomenon, which allow to control forming the product quality at all stages of its manufacture. Studying the ways to use artificial intelligence methods to solve technological problems he proposed an approach to create fundamentally new processing methods.

Averchenkov V.I. is the author of more than 700 scientific works, including 60 monographs, textbooks, manuals and 8 inventions. Among these works, the most famous are 10 monographs published on the basis of the research results carried out together with the scientists of the Academy of Sciences of the Ukrainian SSR and the Academy of Sciences of the BSSR. He proved to be a capable manager of research teams: an institute laboratory of CAD-TP was created under his guidance, and in 1991 Bryansk Regional Center for New Information Technologies was established, which conducts comprehensive work on computerization of education and other activities in Bryansk region.

In recent years he has supervised more than 20 research and design works at the request of the Ministry of Education and Science, regional departments and industrial enterprises of the region.

V. I. Averchenkov is the chairman of the dissertation committee on doctoral and candidate theses defense in three specialties of IT development, as well as a member of other dissertation committees on doctoral theses defense.

Journal's mission

Scientific and technical journal «Automation and Modelling in Design and Management» is issued as:

Editorial Policy of the Journal

The editorial policy of the journal is based on the following principles:

objective and impartial selection of papers for publishing;
high demands for the quality of scientific research;
compliance with the reliability, scientific significance and relevance of published papers;
collective character of making decisions about the publication of papers;
comprehensive and efficient communication with authors;
strict compliance with copyright and editorial ethics;
accurate observation of journal issues schedule.

After the review is completed, the author is sent a text of the review and a copy of the manuscript with the comments of the reviewer and the scientific editor for revision.

The decision to publish or reject the materials submitted to the publication is made by the editorial board in accordance with the Declaration of Publication Ethics.

Papers are published in Russian and English.

Category 12+.

License Agreement No. 124-03/2019 dated March 27, 2019 "On including the journal Automation and Modelling in Design and Management into the Russian Science Citation Index".

Bryansk State Technical University got its own DOI in February, 2018, and now it is registered as a separate publisher by the agency Crossref (Bryansk State Technical University).

Journal articles are licensed under the CC BY 4.0 Creative Commons Attribution 4.0 License.

Submit manuscript

Editor-in-chief
Averchenkov Vladimir
aver@tu-bryansk.ru

Editorial Committee
Podvesovskiy Aleksandr
apodv@tu-bryansk.ru
+7(4832)560984

Journal's mission

Confirmation

Регистрация