MONITORING OF TECHNICAL CONDITION OF BUILDINGS AND STRUCTURES AS THE BASIS OF INTEGRATED SAFETY IN CONSTRUCTION
Authors:
1.
Moscow State University of Civil Engineering
(Department of «Information systems, technologies and construction automation", professor)
from 01.01.2019 until now
Platov South-Russian State Polytechnic University (NPI) (Obscheinzhenernye discipliny, professor)
from 01.01.1980 to 01.01.2019
Moscow, Russian Federation
from 01.01.2019 until now
Platov South-Russian State Polytechnic University (NPI) (Obscheinzhenernye discipliny, professor)
from 01.01.1980 to 01.01.2019
Moscow, Russian Federation
2.
Platov South-State Polytechnic University (Novocherkassk Politechnic Institute)
(Department of "General Engineering disciplines", Docent)
Novocherkassk, Rostov-on-Don, Russian Federation
Novocherkassk, Rostov-on-Don, Russian Federation
3.
FGBOU VO «Yuzhno-Rossiyskiy gosudarstvennyy politehnicheskiy universitet (NPI) imeni M.I. Platova»
(docent kafedry «Obscheinzhenernye discipliny»)
Novocherkassk, Russian Federation
Novocherkassk, Russian Federation
Type:
Article
Pages:
from 76
to 81
Status:
Received:
28.01.2016
Accepted:
28.01.2016
Published:
28.01.2016
Language:
Russian
Keywords:
Monitoring of technical condition of object, durability and operational reliability, damages of construction designs, center of information processing, sensors
Abstract (English):
In article authors touched the hot topic connected with inspection of buildings and constructions. The review of the existing systems of monitoring of technical condition of objects is provided, their shortcomings are specified, justification of need of development of new, technically advanced technique and hardware is given. Descriptions of two inventions which are a part of system are given: sensor of measurement of width of disclosure of cracks and joints of buildings and constructions, and also sensor of a tilt angle one-plane.
In article authors touched the hot topic connected with inspection of buildings and constructions. The review of the existing systems of monitoring of technical condition of objects is provided, their shortcomings are specified, justification of need of development of new, technically advanced technique and hardware is given. Descriptions of two inventions which are a part of system are given: sensor of measurement of width of disclosure of cracks and joints of buildings and constructions, and also sensor of a tilt angle one-plane.
Keywords:
Monitoring of technical condition of object, durability and operational reliability, damages of construction designs, center of information processing, sensors
Monitoring of technical condition of object, durability and operational reliability, damages of construction designs, center of information processing, sensors
