A surface layer and a cold-hardening depth as basic parameters ensuring quality of low-rigid shafts are analyzed. A value of an interference area depending on a grain size which is a criterion for the definition of strengthened layer depth is established. The experimental results on the definition of quality basic parameters for a surface layer at the strengthening for the depth of an interference area are shown.
surface layer, interference area, strengthening depth, residual stresses. hardness.
1. Zaides S.A., Skorokhodov K.A., Kurguzov A.S. Device for Cylindric Part Surface: А.С. 1719191 ICIcl. 24 В 39/04 USSR – 4806904/27; claimed 28.03.96; published. 15.03.92. Bull. №10.
2. Drachyov О. Technology for Low-rigid Axial-symmetric Part Manufacturing. M. : Polytechnica 2005. pp. 342.
3. Gorbunov А.V., Gorbunov V.F. Resistance to Round Shaft Plastic Forming at Bend Taking into Account Surface Layer Special Properties // Inter-College Proceedings ; under the editorship of S.A. Zaides. Irkutsk: Publishing House of IrSTU. 2010. pp. 25–38.
4. Gorbunov V.F. Stressed and Limiting State of Polycrystalline Materials // Irkutsk Agricultural Institute. 1987. pp. 16. Dep. № 478-В88, VINITI.
5. Balokhonov R., Bolesta А., Bondar М. Surface Layers and Inner Boundaries in Heterogeneous Materials; under the editorship of V.Е. Panin. Novosibirsk : Publishing House of SB RAS, 2006. pp. 520.
6. Smelyansky V.М. Mechanics of Material Strengthening by Surface Deformation. М.: Mechanical Engineering, 2002. pp. 300.
7. Zaides S.А., Ngo К.К. Scientific substantiation of de-formations in constrained conditions // Science Intensive Technologies in Mechanical Engineering. 2015. № 9(51). pp. 39–43.
8. Gorbunov А.V., Gorbunov V.F. Regularities in Steel 25 Surface Layer Strain Hardening // Bulletin of IrSTU. 2011. № 6. pp. 50–52.
9. Zaides S.А. Residual Stress and Quality of Calibrated Metal. Irkutsk: Publishing House of Irkutsk Uni., 1992. pp. 200.
