employee
Bryansk, Bryansk, Russian Federation
The modification of steel friction surface at the expense of the formation on it a surface layer implanted and compound strengthened with tungsten carbides together with the formation of a sub-layer consisting of cellular super-cooled austenite stabilized by tungsten and reinforced with tungsten carbide grid consisting of packaged nano-sized particles is considered. The influence of implanted tungsten carbides upon the formation in friction surfaces of wear-resistant structures formed during the realization of combined electro-mechanical working techniques is investigated. It is shown that at a thermo-power effect in the area of deformation takes place an intensive austenitizing of steel with the dilution of a tungsten carbide powder and further formation of composite nano-structures as a result of the dissociation of super-cooled austenite oversaturated with tungsten. There are shown results of tribotechnical tests of cylindrical samples by a normalized method.
surface layer, wear-resistance, electro-mechanical working, strengthening, micro-structure, tungsten carbide, super-cooled austenite, over-saturated solid solution, tribotechnical tests.
1. Gorlenko, А.О., Gorlenko, О.А. Pulse electro-mechanical working // Science Intensive Technologies in Mechanical Engineering. – 2011. – № 6 (06). – pp. 21 – 25.
2. Gorlenko, А.О. Friction surfaces strengthening of ma-chine parts at electro-mechanical working // Bulletin of BSTU. – 2011. – № 3. – pp. 4 – 8.
3. Gorlenko, А.О., Matlakhov, V.P. Wear-resistance technological increase in cylindrical friction surfaces // Friction and Lubrication in Machines and Mechanisms. – 2010. – № 5. – pp. 20 – 26.
4. Gorlenko, А.О., Matlakhov, V.P. Friction surface wear-resistance assurance by supervised technological effect // Bulletin of BSTU. – 2007. – № 2. – pp. 10 – 15.
5. Gorlenko, А.О., Prudnikov, М.I. Tribotechnical tests normalization for data base formation on one-stage technological support of wear-resistance // Friction and Lubrication in Machines and Mechanisms. – 2008. – №9. – pp. 7 – 13.
6. Bishutin, S.G. Wear-Resistance of Machinery and Mechanisms: Manual / S.G. Bishutin, А.О. Gorlenko, V.P. Matlakhov; under the editorship of S.G. Bishutin. – Bryansk: Publishing House of BSTU, 2010. – pp. 112.
