By significant advantages over other methods of case-hardening possess processes carried out in oxygenfree environment, in particular, vacuum and ionic atmospheres which are used for surface strengthening the most critical parts of machinery and tools. These processes are characterized with a great amount of possible options of technological modes, an optimum choice of which is difficult through an experimental way. That is why a wide practical use found simulators of vacuum and ionic case-hardening in which the boundary conditions describe carbon mass transfer from working medium into metal. It is determined in an experimental way that at vacuum and ionic case-hardening in working medium having hydrocarbons, in particular, acetylene upon a saturated metal surface is formed either graphite or cementite which are a source for carbon diffuse into a metal depth. Thereupon at the formation of simulators boundary conditions it is necessary to take into account that carbon activity in these stages is equal to 1. That is why in boundary conditions should be introduced carbon concentrations in austenite corresponding to these activities. An obtained earlier through methods of spectral analysis direct proportionality between a carbonizing capacity of working medium and an acetylene content in it is explained by hydrocarbon thermal decomposition offered by a basis reaction at which Pauly quantummechanical principle is carried out. The results obtained are true both for vacuum, and for ionic working medium used at case-hardening as the ionization of latter does not exceed 10% of vol.
diffusion, mass transfer, case-hardening, boundary conditions, simulator, hydrocarbon media
1. Otto, F.J. Vacuum carburizing of aerospace and automotive materials /F.J. Otto, D.H. Herring //Heat Treating Progress. – 2005. – Т. 5. – № 1. – С. 33-37.
2. Kula, P. New vacuum carburizing technology /P. Kula, J. Olejnik, J. Kowalewski //Heat Treating Progress. – 2001. – Vol. 1. – № 1. –P. 57–65.
3. Atena, H. Niederdruck-Aufkohlung mit Hochdruck-Gasabschreckung: Grundlagen, Einsatzmöglichkei-ten und Anlagentechnik /H. Atena, F. Schrank //HTM. Härtereitechnische Mitteilungen. – 2002. – Vol. 4. – № 57. – P. 247-256.
4. Smirnov, А.Е. Application of vacuum thermal and chemical thermal treatment for strengthening heavily loaded machinery parts, devices and tools /А.Е. Smirnov, М.Yu. Semyonov //Science and Education: electronic journal. – 2014. – № 2. – URL: http://technomag.bmstu.ru/doc/700036.html (address date: 10.01.2016).
5. Reinhold, B. Plasma carburizing: exotic with potential /B. Reinhold //International Heat Treatment & Surface Engineering. – 2009. – Vol. 3. – № 4. – P. 136-140.
6. Semyonov, М.Yu. Design of technologies for heavilyloaded cogwheels surface strengthening based on computation method /М.Yu. Semyonov //Problems of Ferrous Metallurgy and Material Science. – 2014. – № 2. – pp. 16-22.
7. Semyonov, М.Yu. Computation of concentrationresponse carbon curves at vacuum case-hardening of steel /М.Yu. Semyonov, А.Е. Smirnov, М.Yu. Ryzhova //Metal Science and Metal Thermal Treatment. – 2013. – № 1(691). – pp. 38-42.
8. Rodionov, А.V. Computation of concentrationresponse carbon curves at case-hardening in activated atmosphere /А.V. Rodionov, N.М. Ryzhov, R.S. Fakhurtdinov, Е.N. Zhidkov //Metal Science and Metal Thermal Treatment. – 1991. – № 7. – pp. 28-31.
9. Fromm, Е. Gases and Carbon in Metals: [transl. from Germ.] /Е. Fromm, Е. Hebhardt. М.: Metal-lurgy, 1980. pp. 712.
10. Ryzhov, N.М. Vacuum case-hardening of chromiumnickel steel /N.М. Ryzhov, А.Е. Smirnov, R.S. Fakhurtdinov, А.I. Mordovin //Metal Science and Metal Thermal Treatment. – 2008. – № 2. – pp. 25-29.
11. Ryzhov, N.М. Peculiarities of vacuum case-hardening in acetylene of heatresisting steel /N.М. Ryzhov, А.Е. Smirnov, R.S. Fakhortdinov, L.М. Mulyakayev, V.I. Gromov //Metal Science and Metal Thermal Treatment. – 2004. – № 6. – pp. 10-15.
12. Semyonov, М.Yu. Structure control of carburized layers in heatresisting steel. Part I /М.Yu. Semyonov // Metal Science and Metal Thermal Treatment. – 2013. – № 5(695). – pp. 31-38.
13. Semyonov, М.Yu. Structure control of carburized layers in heatresisting steel. Part II /М.Yu. Semyonov // Metal Science and Metal Thermal Treatment. – 2013. – № 6(696). – pp. 32-37.
14. Andersson, J.O. Thermo-Calc & DICTRA, compu-tational tools for materials science /J.O. Andersson, T. Helander, L. Höglund, Sh. Pingfang, S. Bo //Calphad. – 2002. – Т. 26. – № 2. – С. 273-312.
15. Semyonov, М.Yu. Kinetics of carbon and nitrogen mass transfer in ionized atmosphere / М.Yu. Semyonov, А.Е. Smirnov, P.N. Demidov, М.М. Lashnev //Science and Education: electronic jour-nal – 2012. – № 9. – http://technomag.edu.ru/en/doc/452489.html (ad-dress date: 10.01.2016).
16. Mordovin, А.I. Analysis of atmosphere efficiency at vacuum case-hardening /А.I.Mordovin, А.Е. Smirnov, L.P. Fomina, N.М. Рыжов //Strengthening Techniques and Coatings. – 2008. – № 11. – pp. 31‒35.
17. Tesner, P.А. Carbon Formation from Hydrocarbon of Gaseous Phase /P.А. Tesner. – М.: Chemistry, 1972. – pp. 136.
18. Smirnov, А.Е. Development of Methods for Active Control and Automation of Ionic Case-Hardening of Alloyed Steel: Thesis for Can.Eng. degree competition /А.Е. Smirnov. – М., 1991. – pp.198.
19. Feinman, R. Feinman’s Lectures on Physics. Edition. 8,9. Quantum Mechanics /R. Feinman, R. Leiton, М. Sands. – М.: Mir, 1978. – pp. 528.
