KOMPOZICIONNOE VYAZHUSCHEE DLYA MONOLITNOGO STROITEL'STVA V SEVERNYH REGIONAH
Abstract and keywords
Abstract (English):
The paper demonstrates the possibility of production composite binders of different compositions for monolithic placement of concrete, including at freezing temperatures. Mathematical models of relations of compressive strength and flexural strength, and an average density of composite binder (CB) from the ratio of quartz-bearing and plasticizing components in its composition were stated. Compositions of composite binders based on sand of Essk deposit that allow reduction of cement consumption with constant physical and mechanical characteristics were developed. The influence of the composition of the silica component on the particle-size determination of the composite binder were stated. Rheotehnological characteristics and microstructural features of the cement stone of various compositions were studied.

Keywords:
composite binders, fine ground cement, plasticizer, silica component, microstructure, hydrated calcium silicate.
References

1. Lesovik V.S., Suleymanova L.A., Kara K.A. Energoeffektivnye gazobetony na kompozitsionnykh vyazhushchikh dlya monolitnogo stroitel´stva. Izvestiya vysshikh uchebnykh zavedeniy. Stroitel´stvo. 2012. №3. S. 10-20

2. Suleymanova L.A., Lesovik V.S., Kharkhardin A.N. Topologicheskie svoystva polidispersnykh kompozitsionnykh vyazhushchikh dlya neavtoklavnykh yacheistykh betonov. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V.G. Shukhova. 2013. № 2. S. 46–50.

3. Ageeva M.S., Alfimova N.I Effektivnye kompozitsionnye vyazhushchie na osnove tekhnogennogo syr´ya. Saarbrucken, 2015. 75 s.

4. Alfimova N.I., Lesovik V.S., Savin A.V., Shadskiy E.E. Perspektivy primeneniya kompozitsionnykh vyazhushchikh pri proizvodstve zhelezobetonnykh izdeliy. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2014. № 5 (88). S. 95–99.

5. Lesovik V.S., Savin A.V., Alfimova N.I. Ginzburg A.V. Otsenka zashchitnykh svoystv betonov na kompozitsionnykh vyazhushchikh po otnosheniyu k stal´noy armature. Stroitel´nye materialy. 2013. №7 S. 56–58.

6. Alfimova N.I., Vishnevskaya Ya.Yu., Trunov P.V. Kompozitsionnye vyazhushchie i izdeliya s ispol´zovaniem tekhnogennogo syr´ya: monografiya. Saarbruken. Izd-vo LAP. 2013. 127 s.

7. Lesovik V.S., Ageeva M.S., Ivanov A.V. Granulirovannye shlaki v proizvodstve kompozitsionnykh vyazhushchikh. Vestnik Severo-Kavkazskogo federal´nogo universiteta. 2011. № 3. S. 29.

8. Alfimova N.I., Trunov P.V., Shadskiy E.E. Modifitsirovannye vyazhushchie s ispol´zovaniem vulkanicheskogo syr´ya: monografiya. Saarbrucken: Izd-vo LAP LAMBERT Academic Publishing. 2015. 133 s.

9. Lesovik V.S., Savin A.V., Alfimova N.I. Stepen´ gidratatsii kompozitsionnykh vyazhushchikh kak faktor korrozii armatury v betone. Izvestiya vysshikh uchebnykh zavedeniy. Stroitel´stvo. 2013. № 1 (649). S. 28–33.

10. Lesovik V.S., Vishnevskaya Ya.Yu., Alfimova N.I., Savin A.V. Vliyanie gidrotermal´noy obrabotki i davleniya na strukturoobrazovanie kompozitsionnykh vyazhushchikh. Tekhnologii betonov. 2013. № 10 (87). S. 38-39.

11. Kara K.A. Gazobetony na kompozitsionnykh vyazhushchikh dlya monolitnogo stroitel´stva: avtoref.... kand. tekhn. nauk. Belgorod, 2011. 25 s.

12. Suleymanova L.A., Kara K.A. Gazobetony na kompozitsionnykh vyazhushchikh dlya monolitnogo stroitel´stva. Belgorod, 2011. 150 s.

13. Lesovik R.V., Zhernovskiy I.V. Vybor kremnezemsoderzhashchego komponenta kompozitsionnykh vyazhushchikh veshchestv. Stroitel´nye materialy. 2008. № 8. S. 78–79.

14. Lesovik V.S., Alfimova N.I., Trunov P.V. Reduction of energy consumption in manufacturing the fine ground cement. Research Journal of Applied Sciences. 2014. T. 9. № 11. S. 745-748.

15. Lesovik V.S., Urkhanova L.A., Gridchin A.M., Lkhasaranov S.A. Composite binders on the basis of pearlite raw material of Transbaikalia. Research Journal of Applied Sciences. 2014. T. 9 №12. S. 1016–1020.

16. Lesovik R.V., Klyuyev S.V., Klyuyev A.V., Netrebenko A.V., Kalashnikov N.V. Fiber concrete on composite knitting and industrialsand KMA for bent designs. World Applied Sciences Journal 2014. T. 30. №8. S. 964–969.

17. Lesovik R.V., Klyuyev S.V., Klyuyev A.V., Netrebenko A.V., Durachenko A.V. High–strength fiber–reinforced concrete containing technogenic raw materials and composite binders with use of nanodispersed powder. Research Journal of Applied Sciences. 2014. T 9. №12. S. 1153–1157.

18. Lesovik R.V., Klyuev S.V., Klyuev A.V., Kazlitin S.A., Netrebenko A.V., Durachenko A.V. Fiber–reinforced concretes made of technogenic raw materials and composite binders for industrial building floors. International Journal of Applied Engineering Research. 2014. T 9. №22. S. 16711–16724.

19. Klyuev A.V., Lesovik R.V. Stale-fibrobeton na kompozitsionnykh vyazhushchikh i tekhnogennykh peskakh KMA dlya izgibaemykh konstruktsiy. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V.G. Shukhova. 2012. № 2. S. 14–16.

20. Solov´eva L.N., Ogurtsova Yu.N., Bondarenko A.I., Botsman A.N. Kharakteristiki peskov s uchetom ikh primeneniya v kompozitsionnykh vyazhushchikh. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V.G. Shukhova. 2012. № 2. S. 31–33.


Login or Create
* Forgot password?