Cutting mode impact upon output process parameters at processing of polycrystalline composite materials

Yuriy Zubarev; Alexsandr Priyomyshev; Aleksey Zaostrovskiy

doi:doi:10.12737/article_592d15da043ce6.63942104

UDC 62

Cutting mode impact upon output process parameters at processing of polycrystalline composite materials

Published в Science intensive technologies in mechanical engineering · Volume 2017, Issue 6, 2017 · Pages 34–38 · Rubrics: SCIENCE INTENSIVE TECHNOLOGIES OF NONMETALLIC PARTS PRODUCTION

DOI 10.12737/article_592d15da043ce6.63942104

Received: 26.05.2017 Accepted: 01.06.2017 Published: 01.06.2017 Language of publication: RUS

Authors

Yuriy Zubarev ¹ · Alexsandr Priyomyshev ² · Aleksey Zaostrovskiy ³

1 Saint-Petersburg State Marine Technical University (professor)
Sankt-Peterburg, Russian Federation

2 Peter the Great Saint-Petersburg Polytechnic University (docent)
Sankt-Peterburg, St. Petersburg, Russian Federation

3 Peter the Great Saint-Petersburg Polytechnic University (aspirant)
Sankt-Peterburg, St. Petersburg, Russian Federation

ABSTRACT

The peculiarities in polymeric composite material cutting are considered. The recommendations for use of different materials for cutters, their geometry and treatment modes are offered that allows obtaining the required quality of a product surface.

KEYWORDS

cutting; polymeric composite materials; cutter; treatment quality.

Information Text References

Authors:

1. Saint-Petersburg State Marine Technical University (professor)

Sankt-Peterburg, Russian Federation

2. Peter the Great Saint-Petersburg Polytechnic University (docent)

Sankt-Peterburg, St. Petersburg, Russian Federation

3. Peter the Great Saint-Petersburg Polytechnic University (aspirant)

Sankt-Peterburg, St. Petersburg, Russian Federation

Type:

Article

Pages:

from 34 to 38

Status:

Published

Subject area:

UDC 62

Language:

Russian, English

Keywords:

cutting; polymeric composite materials; cutter; treatment quality.

Text

Text (PDF): Read Download

References

1. Bikov, Yu.A. Structure and properties of constructional nano-materials / /Reference Book. Engineering Journal. Appendix. - 2010. - №7. pp. 1- 24.

2. Zubarev, Yu.M., Priyomyshev, A.V., Zaostrovsky, A.S. Peculiarities in technology of carbon plastic machining // Science Intensive Technologies in Mechanical Engineering. - 2016. - № 5. pp. 30- 33.

3. Zubarev, Yu.M. Modern Tool Materials. - S-Pb.: “Lan” Publishing House, 2014. - pp. 304.

4. Zubarev, Yu.M. Technological Support in Machine Operation Reliability. - S-Pb.: “Lan” Publishing House, 2016. - pp. 320.

5. Parts Surface Engineering /under the editorship of A.G.Suskov. - M.: Mechanical Engineering, 2008. - pp. 320.

6. Composite Material Machining at Aircraft Assemblage. - Sumy: PTH “University Book” Publishing House, 2013. - pp. 97.

7. Mikhailin, Yu.A. Constructional polymeric composite materials. - S-Pb.: Scientific Fundamentals and Technologies, 2010. - pp. 822.

8. Priyomyshev, A.V., Zaostrovsky, A.S. Peculiarities in machining of advanced technology polymeric composite materials based on carbon fiber with thermoplastic matrix // Science and Education: Innovations, Integration and Development. - 2014. - №1. - pp. 174- 179.

9. Pool, Ch., Owens, F. Nano-Technologies: Transl. from Engl. - M.: Technosphere, - 2004. - pp. 328.

Cutting mode impact upon output process parameters at processing of polycrystalline composite materials

Confirmation

Регистрация