RATED DEFINITION OF DEGREE OF CUTTER COATING INFLUENCE UPON PARAMETERS OF SURFACE LAYER QUALITY OF PARTS WORKED
Authors:
1.
Soloviev Rybinsk State Aviation Technical University
( zaveduyuschiy kafedroy, Zasluzhennyy deyatel' nauki i tehniki)
Rybinsk, Russian Federation
Rybinsk, Russian Federation
Type:
Article
Pages:
from 20
to 24
Status:
Published
Received:
27.06.2017
Accepted:
11.01.2023
Published:
20.07.2017
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian, English
Keywords:
wear-resistant coating, surface layer quality, friction factor, residual stresses, degree and depth of work hardening, surface roughness
Abstract (English):
The impact of cutter wear-resistant coatings upon cutting process parameters and characteristics of surface layer quality in the parts worked: residual stresses, a degree and a depth of work hardening of a surface layer, surface roughness is investigated.
The impact of cutter wear-resistant coatings upon cutting process parameters and characteristics of surface layer quality in the parts worked: residual stresses, a degree and a depth of work hardening of a surface layer, surface roughness is investigated.
Keywords:
wear-resistant coating, surface layer quality, friction factor, residual stresses, degree and depth of work hardening, surface roughness
wear-resistant coating, surface layer quality, friction factor, residual stresses, degree and depth of work hardening, surface roughness
1. Beziyazychny, V.F. Similitude Method in Engineering Techniques [Text] / V. F. Beziyazychny. – М: Mechanical Engineering, 2012. – pp. 317.
2. Baskov, М.V. Investigation of cutter coatings impact upon quality parameters of surface layer and wear-resistance of parts during turning // Bulletin of Soloviyov State Aircraft Technical University of Rybinsk. 2017. №8. ‒ pp. 38‒43.
3. Shuster, L.Sh. Adhesive Contact of Metal Solids [Text] / L. Sh. Shuster. – Ufa: Gilem, 1999. – pp. 199.
