Severodvinsk, Arkhangelsk, Russian Federation
Arhangel'sk, Arkhangelsk, Russian Federation
Severodvinsk, Arkhangelsk, Russian Federation
When using friction gripping device with a screw drive to move designs from wood there is relaxation of tightening force of the screw with time due to rheological characteristics of wood. Weakening of tightening leads to a reduction of friction forces, holding the floating structure, which can lead to failure and drop of structure. To ensure reliable holding of wooden construction by gripping device within the specified time, prior increase in torque taking into account dynamics subsequent weakening is required. The article presents description of experimental setup to study the rate of weakening of the torque of the screw clamp and development of elastic deformation of samples of wood and plywood of different thickness with clamps of different hardness. Dependence of elastic strain and associated weakening of tightening force from time which samples stay under load, is revealed. The dependence has general nature for all the samples of wood and derivative materials. Regression analysis of the data and graphs of weakening the tightness of the clamps and development of elastic deformations is performed for each experiment. It is established that approximation to exponential function reflects the dependence of attenuation of torque settings on time in the interval up to 24 hours more accurately, than exponential function. To identify factors influencing the rate of weakening of the torque, regression analysis is made. The dependence of the rate of weakening of the torque by on stiffness of the clamp, thickness of wooden construction in the place of installation of gripping device and of the modulus of elasticity of wood is revealed. With the increase in rigidity of clamp and size of cross section of structure, weakening speed increases. Method of determining the rate of increase in force of pre-tightening of friction gripping device with screw drive to move wooden structures is suggested.
wooden structures, friction gripping devices, clamping devices, contact elements, tightening force, rheology of wood.
Принцип работы фрикционных грузозахватных устройств (ГЗУ) заключается в зажиме кромки перемещаемой конструкции с помощью специальных контактных элементов. Зажимное устройство создает необходимую для удерживания конструкции силу трения [2, 9].
При использовании фрикционных ГЗУ с винтовым приводом для перемещения конструкций из древесины со временем происходит ослабление усилия затяжки винта вследствие реологических особенностей древесины. Рассмотрим взаимодействие древесины с контактными элементами зажимного устройства на примере винтовой такелажной струбцины (рис. 1).
1. Belyankin F.P., Yatsenko V.F. Deformativnost' i soprotivlyaemost' drevesiny ka kuprugo-vyazko-plasticheskogo tela [Deformability and resilience of wood as elastic-visco-plastic body].Kiev, 1957, 200 p. (In Russian)
2. Vaynson A.A., Andreev A.F. Spetsializirovannye kranovye gruzozakhvatnye ustroystva dlya shtuchnykh gruzov [Specialized crane load gripping devices for piece freights]. Moscow, 1972, 200p. (In Russian)
3. GOST 16483.25-73: Drevesina. Metod opredeleniya modulya uprugosti pri szhatii poperek volokon [State Standard 16483.25-73.Wood. A method of definition of the module of elasticity at compression across fibers]. Moscow, 1999. – 5 p. (In Russian)
4. Dunaev V.F., Melekhov V.I., Zakharov M.V. Zakonomernost' izmeneniya mekhanicheskikh svoystv drevesiny vo vremeni pri uderzhanii reaktsii [Regularity of change of mechanical properties of wood in time at reaction deduction]. Lesnoy zhurnal [Forest magazine]. 2014, no. 2, p. 75-85. (In Russian)
5. EvdokimovYu.A., Kolesnikov V.I., Teterin A.I. Planirovanie i analiz eksperimentov pri reshenii zadach treniya iiznosa [Planning and the analysis of experiments at the solution of problems of friction and wear]. Moscow, 1980, 228 p. (In Russian)
6. Kuritsyn V.N., Tyuleneva E.M. Eksperimental'noe utochnenie reologicheskoy modeli drevesiny [Experimental specification of rheological model of wood].Lesnoy zhurnal [Forest magazine]. 2009, no. 5, p. 104-109. (In Russian)
7. Matematicheskaya statistika / Pod red. V.S. Zarubina, A.P. Krishchenko [Mathematical statistics]. Moscow, 2001, 424 p. (In Russian)
8. Melekhov V.I., Podol'skaya V.L. K voprosu o protsesse deformatsiii destruktsii drevesiny pri szhatii poperek volokon [To a question of process of deformation and destruction of wood at compression across fibers]. Lesnoy zhurnal [Forest magazine]. 1999, no. 2-3, p. 120-124. (In Russian)
9. Morozov A.S., Rudenko A.V., Rodichkin S.A. Komp'yuternoe issledovanie silovykh kharakteristik friktsionnogo gruzozakhvatnogo ustroystva [Computer research of power characteristics of the frictional load gripping device]. Materialy nauchnoy konferentsi iprofessorsko-prepodavatel'skogo sostava, nauchnykh sotrudnikov i aspirantov SAFU im. M.V. Lomonosova [Materials of a scientific conference of the faculty, research associates and graduate students of SAFU of M. V. Lomonosov]. Arkhangelsk, 2016, p. 1362-1365 (In Russian)
10. Tyuleneva E.M. Utochnenie reologicheskoy modeli drevesiny [Specification of rheological model of wood].Khvoynyeboreal'noyzony [Coniferous boreal zone], XXV, no 1-2, 2008. p. 179-183.(In Russian)
11. Tyuleneva E.M.Ostatochnye deformatsii v drevesine [Residual deformations in wood].Lesnoy vestnik [Forest messenger]. 2014, №2,p. 70-74. (In Russian)
12. Ugolev B.N. Deformativnost' drevesiny i napryazheniya pri sushke [Deformability of wood and tension when drying]. Moscow, 1971, 176 p. (In Russian)
13. Ugolev B.N.Drevesinovedenie i lesnoe tovarovedenie [Wood science and forest merchandizing].Moscow, 2007, 351p. (In Russian)
14. Hoffmeyer P., Davidson R.W. Mechano-sorptive creep mechanism of wood in compression and bending. Wood Science and Technology, September 1989, Vol. 23(3), pp 215-227.
15. Hunt D.G. The mechano-sorptive creep susceptibility of two softwoods and its relation to some other materials properties. Journal of Materials Science, June 1986, Vol. 21, Issue 6, pp 2088-2096
