Optimization of product manufacturability for methods of electrical treatment

Evgeny Smolentsev; Aleksandr Portnykh; Oleg Skrygin

doi:doi:10.30987/article_5bd8aa89895297.50864280

UDC 62

Optimization of product manufacturability for methods of electrical treatment

Published в Science intensive technologies in mechanical engineering · Volume 2018, Issue 11, 2018 · Pages 31–35 · Rubrics: SCIENCE INTENSIVE TECHNOLOGIES OF ELECTROMACHINING AND COMBINED PROCESSING (archived)

DOI 10.30987/article_5bd8aa89895297.50864280

Received: 29.10.2018 Accepted: 30.11.2018 Published: 30.11.2018 Language of publication: RUS

Authors

Evgeny Smolentsev ¹ iD · Aleksandr Portnykh ² · Oleg Skrygin ³

1 Voronezh State Technical University (department “Mechanical Engineering Technology”, Professor)
Voronezh, Voronezh, Russian Federation

2 Voronezh Mechanical Works (nachal'nik otdela)
Voronezh, Voronezh, Russian Federation

3 Voronezh Mechanical Works (nachal'nik otdela)
Voronezh, Voronezh, Russian Federation

ABSTRACT

The peculiarities of manufacturability optimization of designs and produce the machining of which is performed with the use of electro-physical and electro-chemical methods including the combination of different physical effects in a single process are considered.

KEYWORDS

updating for manufacturability; methods of electrical treatment basic requirements machining methods

Information Text References

Authors:

1. Voronezh State Technical University (department “Mechanical Engineering Technology”, Professor)

Voronezh, Voronezh, Russian Federation

2. Voronezh Mechanical Works (nachal'nik otdela)

Voronezh, Voronezh, Russian Federation

3. Voronezh Mechanical Works (nachal'nik otdela)

Voronezh, Voronezh, Russian Federation

Type:

Article

Pages:

from 31 to 35

Status:

Published

Subject area:

UDC 62

Language:

Russian, English

Keywords:

updating for manufacturability; methods of electrical treatment, basic requirements, machining methods

Text

Text (PDF): Read Download

References

1. Beziyazychny, V.F. Fundamentals to Ensure Quality of Metal Produce with Non-Organic Coating / V.F. Beziyazych-ny, V.Yu. Zamyatin, A.Yu. Zamyatin, Yu.P. Zamyatin. - M.: Mechanical Engineering, 2005. - pp. 608.

2. Safonov, S.V. Modes of electro-spark alloying and metal product coatings / S.V. Safonov, V.P. Smolentsev, V.G. Gritsyuk // Science Intensive Technologies in Mechanical Engi-neering. - 2014. - No. 5(35). - pp. 27-31.

3. Smolentsev, V.P., Smolentsev, E.V. State and outlooks in development of combined machining / Bulletin of Soloviyov State Aircraft Technical University of Rybinsk. - 2017. - No. 2. - pp. 5-9.

4. Pat. No. 2464137 the RF. Method of Obtaining Local Area of Cooling in Heat-loaded Part / V.P. Smolentsev et al. // Application 2010144769 of 01.11.10. published 20.10.12, Bull. No. 29.

5. Smolentsev, E.V. Design of Electric and Combined Me-thods of Machining. - M.: Mechanical Engineering, 2005. - pp. 511.

Optimization of product manufacturability for methods of electrical treatment

Confirmation

Регистрация