National Research Nuclear University “MEPhI” ( Professor)
Bauman Moscow State Technical University ( Professor)
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
GRNTI 55.01 Общие вопросы машиностроения
GRNTI 55.13 Технология машиностроения
GRNTI 55.35 Металлургическое машиностроение
A problem in the control automation of surface layer quality parameters and machinery operation properties at cutting is considered. For this purpose there are used corresponding control systems. The substantiation for the formation of the control system of surface layer quality parameters and machinery operation properties is shown. An algorithm of systems functioning is described, and mathematical models are shown.
control system, surface layer quality, operation properties
1. Technological Condition Optimization of Aircraft Engine Parts Machining / Beziyazychny V.F., Kozhina T.D., Konstantinov A.V., Nepomiluev V.V. – M.: MAI Publishers, 1993. – pp. 184.
2. Science Intensive Technologies in Mechanical Engineer-ing / A.G. Suslov, B.M. Bazrov, V.F. Beziyazychny et al.; under the editorship of A.G. Suslov. – M.: Mechanical Engi-neering, 2012. – pp. 528.
3. Lasercheck. URL: https://optical-dimensions.com/index.html (address date: 18.04.2019)
4. SILENOS® ‒ Steel Inclusion Level Evaluation by Nu-merical Optical Systems. URL: https://it.mathworks.com/content/dam/mathworks/mathworks-dot-com/solutions/aerospace-defense/files/2017/expo-de/silenos-steel-inclusion-level-evaluation-by-numerical-optical-systems.pdf (address date: 18.04.2019)
5. Petreshin, D.I., Khandozhko, V.A. Automated support of surface quality and machinery contact stiffness // Science Intensive Technologies in Mechanical Engineering. – 2018. – No.10 (88). – pp. 14-19.
6. Suslov, A.G., Pedtreshin, D.I. Quality Support of Sur-faces Worked Using Self-Learning Technological System // STIN. – 2006. – No.1. – pp. 21-24.
7. Suslov, A.G., Petreshin, D.I. Automated support of Cx surface layer quality complex parameter at machining // Science Intensive Technologies in Mechanical Engineering. – 2011. – No.2. – pp. 34-40.
8. Method for Normal Contact Stiffness Definition of Fixed Joints: methodical recommendations. – M.: ARRIMACH, - 1982.
9. Medvedev, D.M., Khandozhko, V.A. Automated tech-nological support of contact stiffness in machinery ground surfaces and their joints // Bulletin of Bryansk State Technical University. – 2015. – No.2 (46). – pp. 40-49.
10. Parts Surface Engineering / A.G. Suslov [et al.]; under the editorship of A.G. Suslov. – M.: Mechanical Engineering. 2008. – pp. 320.
