Russian Federation
Russian Federation
Russian Federation
Russian Federation
GRNTI 44.31 Теплоэнергетика. Теплотехника
GRNTI 45.01 Общие вопросы электротехники
GRNTI 55.42 Двигателестроение
GRNTI 55.45 Судостроение
GRNTI 73.34 Водный транспорт
The article considers the problems of ship structures exposed to adverse conditions, which contribute to the failure of important mechanisms and reduce the service life of steel parts of machines. One of the most important reasons for the ship structures wear is corrosion. The experience of choosing the electrodes to control the sacrificial protection systems on board ships is presented. There are presented the results of measuring the potential of the hull of the boat ROOM 52-22 at a given control point, using a multimeter MASTECH MY 62 and two control electrodes. The first control electrode is of in-house design; it was made of electric carbon product for electric machines. A standard portable silver chloride reference electrode was used as a second electrode. Both electrodes have been in operation for 3 years. The vessel under consideration was in a long-term parking mode. Control measurements were performed from 23.05 - 07.07.2019, while monitoring the potential of the hull three times a day using several parallel measurements. The time interval between parallel potential measurements made ≈ 5 seconds. The potential of the hull was measured by a specially trained operator. The accuracy of measurements was estimated using the coefficient of variation. Analysis of the studies justified that the accuracy of the control results of the protective anticorrosion systems on ships depends on the choice of the type of control electrode. It has been found that the efficiency of the silver chloride electrode has a strong impact on its operation life. The results of full-scale corrosion studies can be used by ship crews to justify the selection of control electrodes.
corrosion of ships’ steel hulls, control of tread protection systems, control electrodes, potential of the ship hull, measuring results
1. Zobochev Yu. E., Solinskaya E. V. Zashchita sudov ot korrozii i obrastaniya [Protecting ships from corrosion and fouling]. Moscow, Transport Publ., 1984. 174 p.
2. Shvecov V. A., Belov O. A., Belozerov P. A., Shun'kin D. V. Kontrol' sistem protektornoj zashchity stal'nyh sudov i korablej: monografiya [Control of tread protection systems of ships steel hulls: onograph]. Petropavlovsk-Kamchatskij, Izd-vo KamchatGTU, 2016. 109 p.
3. Korobcov I. M. Tekhnicheskoe obsluzhivanie i remont flota [Fleet maintenance and repair]. Moscow, Transport Publ., 1975. 195 p.
4. RD 31.28.10-97 Kompleksnye metody zashchity sudovyh konstrukcij ot korrozii [RD 31.28.10-97 Inte-grated methods for protection of ship structures from corrosion]. Available at: http://docs.cntd.ru/document/1200049727 (accessed: 07.04.2017).
5. GOST 9.056-75. Stal'nye korpusa korablej i sudov. Obshchie trebovaniya k elektrohimicheskoj zash-chite pri dolgovremennom stoyanochnom rezhime [GOST 9.056-75. Ships’ steel hulls. General requirements for electrochemical protection during long-term parking]. Available at: http://docs.cntd.ru/document/1200015017 (accessed: 20.07.2015).
6. GOST 26501-85. Korpusa morskih sudov. Obshchie trebovaniya k elektrohimicheskoj zashchite [GOST 26501-85. Hulls of ships. General requirements for electrochemical protection]. Moscow, Izd-vo standartov, 1985. 7 p.
7. Belov O. A., Shvecov V. A., Yastrebov D. P. Obosnovanie optimal'noj periodichnosti kontrolya raboty protektornoj zashchity stal'nyh korpusov sudov [Justification of optimal frequency of monitoring tread protection of steel hulls]. Ekspluataciya morskogo transporta, 2017, no. 1 (82), pp. 41-48.
8. Belov O. A., Shvecov V. A., Yastrebov D. P., Belavina O. A., Shun'kin D. V. Vnedrenie usovershenstvovannogo sposoba kontrolya sistem protektornoj zashchity stal'nyh korpusov sudov Kamchatskogo flota [Implementation of improved method for monitoring tread protection systems of steel hulls of Kamchatka fleet vessels]. Vestnik Kamchatskogo gosudarstvennogo tekhnicheskogo universiteta, 2017, no. 39, pp. 6-11.
9. Shvecov V. A., Belov O. A., Belavina O. A., Yastrebov D. P. Obosnovanie vozmozhnosti isklyucheniya vneshnego osmotra sistem protektornoj zashchity stal'nyh korpusov sudov [Justification of excluding external inspection of tread protection systems of steel hulls]. Vestnik Astrahanskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Morskaya tekhnika i tekhnologiya, 2017, no. 1, pp. 29-38.
10. Belozerov P. A., Shvecov V. A., Belavina O. A., Shun'kin D. V., Korostylyov D. V., Pahomov V. A., Malinovskij S. A. Obosnovanie sposoba vybora kontrol'nyh tochek dlya izmereniya zashchitnogo potenciala stal'nyh korpusov korablej i sudov [Justification of method of choosing control points for measuring protective potential of steel hulls of ships]. Vestnik Kamchatskogo gosudarstvennogo tekhnicheskogo universiteta, 2014, no. 28, pp. 6-11.
11. Shvecov V. A., Belozerov P. A., Adel'shina N. V., Belavina O. A., Petrenko O. E., Shun'kin D. V., Kirnosenko V. V. Vliyanie kvalifikacii operatora na rezul'taty izmereniya zashchitnogo potenciala stal'nyh kor-pusov korablej i sudov [Influence of operator qualifications on results of measuring protective potential of ships’ steel hulls]. Vestnik Kamchatskogo gosudarstvennogo tekhnicheskogo universiteta, 2014, no. 30, pp. 46-54.
12. Shvecov V. A., Belozerov P. A., Belavina O. A., Shun'kin D. V., Malinovskij S. A. Obosnovanie vybora neobhodimogo chisla parallel'nyh izmerenij zashchitnogo potenciala stal'nyh korpusov korablej i sudov v kontrol'noj tochke [Justification for selection of required number of parallel measurements of protective poten-tial of ships’ steel hulls at control point]. Vestnik Kamchatskogo gosudarstvennogo tekhnicheskogo universiteta, 2016, no. 35, pp. 40-46.
13. Shvecov V. A., Belov O. A., Belozerov P. A., Belavina O. A., Kirnosenko V. V. Obosnovanie neobhodimosti podgotovki operatorov dlya izmereniya potenciala stal'nyh korpusov sudov i korablej [Justification of need for training operators to measure potential of ships’ steel hulls]. Vestnik Kamchatskogo gosudarstvennogo tekhnicheskogo universiteta, 2016, no. 37, pp. 19-24.
14. Shvecov V. A., Belozyorov P. A., Shun'kin D. V., Didenko A. A., Lucenko A. A., Korostylyov D. V., Belavina O. A. Ustrojstvo dlya izmereniya zashchitnogo potenciala stal'nyh korpusov korablej i sudov [Device for measuring protective potential of ships’ steel hulls]. Patent RF № 2014142289/28; 10.07.2015.
15. GOST R 8.736-2011 Gosudarstvennaya sistema obespecheniya edinstva izmerenij (GSI). Izmereniya pryamye mnogokratnye. Metody obrabotki rezul'tatov izmerenij. Osnovnye polozheniya [GOST R 8.736-2011 State system ensuring uniformity of measurements (GSI). Direct multiple measurements. Methods for processing measurement results. Key Points]. Available at: http://docs.cntd.ru/document/1200089016 (accessed: 23.07.2019).
