Journals Conferences Monographies Textbooks Regulatorys Event GQW
Submit manuscript
Home / Journals / NDT World / Volume 23 Issue 1 (87) / Digital Technologies in Radiation Inspection of Aircraft Equipment Products
Digital Technologies in Radiation Inspection of Aircraft Equipment Products
Submit manuscript
To cite
Citations:

DIGITAL TECHNOLOGIES IN RADIATION INSPECTION OF AIRCRAFT EQUIPMENT PRODUCTS
Slavin Andrey 1
Generalov Aleksandr 2
Demidov Aleksandr 3
Authors:
1.  All-Russian Research Institute of Aviation Materials (IC, nachal'nik)

Moskva, Russian Federation
2.  All-Russian Research Institute of Aviation Materials (laboratoriya NMK, nachal'nik)

Moskva, Russian Federation
3.  All-Russian Research Institute of Aviation Materials (laboratoriya nerazrushayuschih metodov kontrolya, nachal'nik sektora rentgenovskih metodov kontrolya)

Moskva, Russian Federation
Type:
Article
DOI:
https://doi.org/10.12737/1609-3178-2020-62-67
Pages:
from 66 to 71
Status:
Published
Received:
26.03.2020
Accepted:
08.04.2020
Published:
08.04.2020
Language:
Russian
Keywords:
digital technique, X-ray film digitization, computed radiography, digital detector systems
Abstract and keywords
Abstract (English):
The problem of radiographic testing of aircraft parts — substitution of radiographic testing technique using radiographic film with others less time-consuming techniques is formulated. As it is a question of radiographic testing of especially responsible aircraft parts, substitution has to be adequate. Quality of the obtaining image has to be, at least, not worse than the film radiographic image. Digital techniques, specifically X-ray film digitization technique, computed radiography using photostimulated plates and digital radiography using digital detector systems of direct and indirect conversion were considered. Functional schemes of each technique are shown. Advantages and disadvantages assessment of each technique was carried out. It is shown that digital radiography using digital detector systems is the most adequate technique for aircraft parts and structures radiographic testing. The problems to be solved for it widespread adoption in aircraft manufacturing, are formulated.

Keywords:
digital technique, X-ray film digitization, computed radiography, digital detector systems
References

1. Mayorov A. A. Rentgenovskoe televidenie v promyshlennom NK. — V mire NK. 2007. № 1(35). S. 48.

2. Kablov E. N. Materialy novogo pokoleniya — osnova innovaciy, tehnologicheskogo liderstva i nacional'noy bezopasnosti Rossii. — Intellekt i tehnologii. 2016. № 2 (14). S. 1621.

3. Kablov E. N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskie napravleniya razvitiya materialov i tehnologiy ih pererabotki na period do 2030 goda». — Aviacionnye materialy i tehnologii. 2015. № 1. S. 333.

4. Kablov E. N., Evgenov A. G., Mazalov I.S. i dr. Evolyuciya struktury i svoystv vysokohromistogo zharoprochnogo splava VZh159, poluchennogo metodom selektivnogo lazernogo splavleniya. Ch. II. — Materialovedenie. 2019. № 4. S. 915.

5. Ospennikova O. G., Lukin V. I., Afanas'ev-Hodykin A .N. i dr. Perspektivnye razrabotki v oblasti vysokotemperaturnoy payki zharoprochnyh splavov. — Aviacionnye materialy i tehnologii. 2017. № S. S. 144–158.

6. Ospennikova O. G., Kosarina E. I., Krupnina O. A. Radiacionnyy nerazrushayuschiy kontrol' — neobhodimoe sredstvo pri sozdanii i sovershenstvovanii tehnologii novyh aviacionnyh materialov. — Voprosy materialovedeniya. 2018. № 3. S.213224.

7. Kosarina E. I., Generalov A. S., Demidov A. A. Problemy v gosudarstvennoy sisteme standartizaciii RF v oblasti radiacionnogo nerazrushayuschego kontrolya. — Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2018. №11. S.10. Dostupno http://www.viam-works.ru (data obrascheniya 28.10.2019).

8. Kosarina E. I., Krupnina O. A., Stepanov A. V. Radiacionnye metody nerazrushayuschego kontrolya / Kurs lekciy.  SPb, SVEN, 2019. — 288 s.

9. Demidov A. A. Stepanov A. V., Turbin E. M., Krupnina O. A O rezhimah rentgenovskogo kontrolya, obespechivayuschih formirovanie radiacionnyh izobrazheniy s zadannym kontrastom. — Aviacionnye materialy i tehnologii. 2016. № 4. S. 80‒85.

10. Cifrovye tehnologii. https://ru.wikipedia.org/wiki/%D0%A6%D0%B8%D1%84%D1%80%D0%BE%D0%B2%D1%8B%D0%B5_%D1%82%D0%B5%D1%85%D0%BD%D0%BE%D0%BB%D0%BE%D0%B3%D0%B8%D0%B8 (data obrascheniya 20. 01.2020).

11. Cifrovaya (komp'yuternaya) radiografiya. https://alfatest.ru/support/articles/tsifrovaya-kompyuternaya-radiografiya (data obrascheniya 20. 01.2020).

12. ISO 11699-1:2008. Non-destructive testing. Industrial radiographic film. Part 1: Classification of film systems for industrial radiography. — 14 r.

13. ISO 14096-1:2005. Non-destructive testing. Qualification of radiographic film digitisation systems. Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control. — 11 r.

14. Bagaev K. A., Kozlovskiy S. S. Ocifrovka radiograficheskih snimkov. Chto sleduet uchest' pri razrabotke i vnedrenii rossiyskih standartov. — V mire NK. 2013. № 3(61). S. 3035.

15. Mayorov A.A. Cifrovye tehnologii v nerazrushayuschem kontrole. — Sfera Neftegaz. 2009. № 9. C. 2637.

16. Stepanov A. V., Kosarina E. I., Demidov A. A. Komp'yuternaya rentgenografiya s primeneniem fotosimulirovannyh plastin. — Aviacionnye materialy i tehnologii. 2015. № 4. S. 79–85.

17. Gonsales R., Vuds R. Cifrovaya obrabotka izobrazheniy. —M.: Tehnosfera, 2012. — 1104 s.

18. Lebedev M. B., Sidulenko O. A., Udod V. A. Analiz sovremennogo sostoyaniya i razvitiya cifrovoy rentgenografii. — Izv. Tomskogo politehnicheskogo universiteta. Inzhiniring georesursov. 2008. № 6. S. 4755.

Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?