WATER ABSORPTION OF AUTOCLAVED AERATED CONCRETE MADE WITH THE USE OF FLY ASH
Rubrics: CONSTRUCTION AND TRANSPORT
Authors:
Type:
Article
Pages:
from 151
to 152
Status:
Published
Received:
09.06.2020
Accepted:
07.01.2023
Published:
16.06.2020
Subject area:
GRNTI 67.01 Общие вопросы строительства
Language:
Russian
Keywords:
water absorption, autoclaved aerated concrete, fly ash.
Abstract (English):
The results of determining the water absorption of autoclaved gas-ash concretes grades on the average density of D500 and D600 are presented. During the work, it was found that the difference in water absorption between the studied brands by mass is 17.2 %, by volume - 5.3 %.
The results of determining the water absorption of autoclaved gas-ash concretes grades on the average density of D500 and D600 are presented. During the work, it was found that the difference in water absorption between the studied brands by mass is 17.2 %, by volume - 5.3 %.
Keywords:
water absorption, autoclaved aerated concrete, fly ash.
water absorption, autoclaved aerated concrete, fly ash.
1. Fedyuk R.S. Issledovanie vodopogloscheniya melkozernistogo fibrobetona na kompozicionnom vyazhuschem // Fundamental'nye issledovaniya. 2016. № 2-2. S. 303-307.
2. Ioannou I., Hamilton A., Hall C. Capillary absorption of water and n-decane by autoclaved aerated concrete // Cement and concrete research. 2008. 38 (6). Rr. 766-771
3. GOST 12730.3 Betony. Metod opredeleniya vodopogloscheniya
