Russian Federation
The article discusses approaches and solutions aimed at increasing the productivity of engineering departments, where CAD software solutions are actively used. In the manufacture of machine parts, it becomes necessary to design technological equipment. Elements of machine tools can be prepared and placed in electronic catalogs (libraries), which in an automated mode will create a set of parametric models of the required technological equipment of machine tools. In this case, the accuracy and quality of modeling will be achieved by excluding the human factor from the design process. The development of such software solutions is implemented by means and components of the open geometric kernel Open Cascade, which has great potential both in the field of modeling and scientific computing.
technological equipment, electronic CAD library, stand-alone software systems, models of assemblies and assemblies, geometric core of Open Cascade, assembly tree
1. Ryzhkov, V. A. Razrabotka modulya sozdaniya tipizirovannyh elementov dlya avtonomnogo klienta sistemy Teamcenter / V. A. Ryzhkov, O. V. Sobenina, A. A. Pak // Informatika: problemy, metodologiya, tehnologii: sbornik materialov XVI mezhdunarodnoy nauchno-metodicheskoy konferencii. - Voronezh, 2016. - S. 404 - 408.
2. Yurov, A. N. Programmnoe modelirovanie i vizualizaciya geometricheskih tel sredstvami yadra OCCT / A. N. Yurov, I. A. Eremin // Informatika: problemy, metodologiya, tehnologii: sbornik materialov XVII mezhdunarodnoy nauchno-metodicheskoy konferencii: v 5 t. Sekciya 12. SAPR i cifrovye tehnologii. – Voronezh, 2017. - S. 340-345.
3. Yurov, A. N. Razrabotka avtonomnyh resheniy na osnove funkcional'nyh vozmozhnostey OCCT / A. N. Yurov // Novye tehnologii v nauchnyh issledovaniyah, proektirovanii, upravlenii, proizvodstve: trudy Mezhdunarodnoy nauchno-tehnicheskoy konferencii. -Voronezh, 2017. - S. 189-191.
4. Bedaka, A. K. CAD-based robot path planning and simulation using OPEN CASCADE / A. K. Bedaka, C. Y. Lin // Procedia computer science. – 2018. – V. 133. – P. 779-785 – DOI 10.1016/j.procs.2018.07.119.
5. NC Machine Interference and Collision Checking System Based on OpenCASCADE / Y. Jianqing [et al.] // International Conference on Digital Manufacturing & Automation. – 2010. – P. 976-979. – DOI 10.1109/ICDMA.2010.244.
6. Developing CAM software with open CASCADE / Q. Liang [et al.] // Advanced Materials Research. – 2013. – V. 753-755. – P. 1266-12699. – DOI 10.4028/www.scientific.net/AMR.753-755.1266/.
7. Zhang, M. D. The simulation and reconstruction of the robotic grinding trajectory on complex surface based on OPEN CASCADE / M. D. Zhang, J. L. Wang // Modul Mach Tool Autom ManufTech. – 2015. – V. 5. – P. 6-9.
8. Research on modeling technology based on Qt and OpenCASCADE / Y. Yuan [et al.] // Modern Electronics Technique. – 2013. – P. 10.
9. Research and Implementation of CAD-INP Integration System Based on OpenCASCADE / Q. Zhou [et al.] // Multimedia and Ubiquitous Engineering (Berlin: Heidelberg). – 2014. – P. 227-232.
