, Russian Federation
Voronezh, Voronezh, Russian Federation
UDK 69 Строительство. Строительные материалы. Строительно-монтажные работы
The paper presents the process of assessing the technical condition of reinforced concrete supports of existing technological overpasses. The characteristics of overpasses are given. Defects identified in the process of assessing the technical condition are shown. The paper describes the control of concrete strength by the non-destructive method of elastic rebound using the Digi Shmidt 2000 device and the determination of the concrete cover thickness and the location of reinforcement by the magnetic method using the Profometer-5S device. The layout of the working reinforcement in the reinforced concrete supports of the overpass section has been determined. The results of verification calculations of the structures of technological ramps are given, taking into account the revealed defects and damages, the strength of materials and the specified actual loads. Proposals are given for improving the performance of concrete of reinforced concrete supports of overpasses.
modeling, technological overpasses, reinforced concrete supports, inspection, control of concrete strength, defects.
1. Rekomendacii po ocenke nadezhnosti stroitel'nyh konstrukciy zdaniy i sooruzheniy po vneshnim priznakam. – M. : CNIIPROMZDANIY, 2001. – 101 s.
2. GOST 22690-88 Betony. Metody opredeleniya prochnosti mehanicheskimi metodami nerazrushayuschego kontrolya. – M. : Standartinform, 1991. – 20 s.
3. SP 13-102-2003 «Pravila obsledovaniya nesuschih stroitel'nyh konstrukciy zdaniy i sooruzheniy». Gosstroy Rossii. – M. : Gosstroy Rossii, 2003. – 31 s.
4. GOST 22904-93. Konstrukcii zhelezobetonnye. Magnitnyy metod opredeleniya tolschiny zaschitnogo sloya betona i raspolozheniya armatury. – M. : Standartinform, 2010. – 16 s.
5. Posobie (k SNiP 2.09.03-85) po proektirovaniyu otdel'no stoyaschih opor i estakad pod tehnologicheskie truboprovody. – M. : Stroyizdat, 1989. – 81 s.
6. SP 43.13330.2012. Sooruzheniya promyshlennyh predpriyatiy. Aktualizirovannaya redakciya SNiP 2.09.03-85. – M.: Minregion Rossii, 2012. – 97 s.
7. GOST 27751-2014. Nadezhnost' stroitel'nyh konstrukciy i osnovaniy. Osnovnye polozheniya. – M. : Standartinform, 2015. – 16 s.
8. GOST 31937-2011. Zdaniya i sooruzheniya. Pravila obsledovaniya i monitoringa tehnicheskogo sostoyaniya. – M. : Standartinform, 2014. – 60 s.
9. Zol'nikov, V. K. Verifikaciya proektov i sozdanie testovyh posledovatel'nostey dlya proektirovaniya mikroshem / V.K. Zol'nikov, S.A. Evdokimova, T.V. Skvorcova // Modelirovanie sistem i processov. – 2019. – T. 12, № 1. – S. 10-16.
10. Mihnevich, I.V. Issledovanie vliyaniya teplovogo vozdeystviya na prochnostnye harakteristiki betona / I.V. Mihnevich, S.D. Nikolenko // Nauchnyy zhurnal stroitel'stva i arhitektury. – 2017. – № 3 (47). – S. 43-51.
