employee
Tver State Medical University (PhD in medicine, professor of the Depatrment of orthopedic dentistry, professor)
employee
Tver', Tver, Russian Federation
graduate student
Tver, Tver, Russian Federation
employee
Tver', Russian Federation
Background. Developed at the end of the 20th century, resin-bonded fixed partial dentures are now a real alternative to traditional bridges and intraosseous implants. The mean survival rate of conventional fixed partial dentures clearly exceeds the mean survival rate of adhesive fixed partial dentures. Debonding of fixed/fixed resin-bonded fixed partial dentures is associated with the difference in the natural mobility of the abutment teeth. Therefore, the fixed/movable resin-bonded fixed partial dentures are preferable. Objectives — to study the stress distribution in fixed/movable resin-bonded fixed partial dentures RBFPD using finite element analysis. Methods. The finite element method was used to preliminary estimate the stress distribution pattern in fixed/movable resin-bonded fixed partial dentures (metal or fiberglass-composite). The calculation was carried out using special programs (Ansys 12.2 Inc. Ansys — USA and AWP 3 D Studio — Russia). Results. The medial area of stresses is located only in the contact zone of the occlusal rest in the quantitative range of 32-60 N/mm2. The distal area of stresses corresponds to the distal connector, being approximately in the same range — 40-65 N/mm2. In the case of a metal retainer, the stresses also apply to it — 4-37 N/mm2. In the case of a fiber-composite retainer, stresses are practically not applied to it — 1-14 N/mm2. Conclusions. Analysis of the stress distribution pattern for the fixed/movable resin-bonded fixed partial dentures, obtained by the finite element method, confirmed: 1) the expediency of shortening the minor retainer 2) the choice of a rigid metal (possibly ceramic) major retainer instead of a weakly rigid fiber-composite major retainer.
fixed/movable resin-bonded fixed partial denture, finite element analysis, stress distribution pattern, major retainer, occlusal rest
1. Ahmed Khaled E, Li Kar Yan, Murray Colin A. Longevity of fiber-reinforced composite fixed partial dentures (FRC FPD)-Systematic review // J Dent. – 2017;61:1-11. https://doi.org/10.1016/j.jdent.2016.08.007
2. Alraheam I.A., Ngoc C.N., Wiesen C.A., Donovan T.E. Five-year success rate of resin-bonded fixed partial dentures: A systematic review // Esthet Restor Dent. – 2019;31(1):40-50. https://doi.org/10.1111/jerd.12431
3. Bömicke W., Rathmann F., Pilz M., Bermejo J.L., Waldecker M., Ohlmann B., Rammelsberg P., Zenthöfer A. Clinical Performance of Posterior Inlay-Retained and Wing-Retained Monolithic Zirconia Resin-Bonded Fixed Partial Dentures: Stage One Results of a Randomized Controlled Trial // J Prosthodont. – 2021;30(5):384-393. https://doi.org/10.1111/jopr.13258
4. Botelho M.G., Dyson J.E., Mui T.H.F., Lam W.Y.H. Clinical audit of posterior three-unit fixed-movable resin-bonded fixed partial dentures - A retrospective, preliminary clinical investigation // J Dent. – 2017;57:26-31. https://doi.org/10.1016/j.jdent.2016.12.003.
5. Botelho M.G., Lam W.Y.H. A fixed movable resin-bonded fixed dental prosthesis--A 16 years clinical report // J Prosthodont Res. – 2016;60(1):63-67. https://doi.org/10.1016/j.jpor.2015.10.003.
6. Botelho M.G., Yon M.J.Y., Mak Ken C.K., Lam W.Y.H. A randomised controlled trial of two-unit cantilevered or three-unit fixed-movable resin-bonded fixed partial dentures replacing missing molars // J Dent. – 2020;103:103519. https://doi.org/10.1016/j.jdent.2020.103519
7. Rathmann F., Bömicke W., Rammelsberg P., Ohlmann B. Veneered zirconia inlay-retained fixed dental prostheses: 10-Year results from a prospective clinical study // J Dent. – 2017;64:68-72. https://doi.org/10.1016/j.jdent.2017.06.008.
8. Guan-Yi Liu, Li-Yuan Yang, Jing Guo. Application of single-retainer all-ceramic resin-bonded fixed partial denture in the maintenance of missing incisor gap after orthodontic treatment in adolescents: a case report // Hua Xi Kou Qiang Yi Xue Za Zhi. – 2020;1;38(1):101-103. https://doi.org/10.7518/hxkq.2020.01.018.
9. Islam Abd Alraheam , Caroline Nguyen Ngoc , Gustavo Oliveira, Terry Donovan. Clinical performance of a modified Resin-Bonded fixed partial denture (Carolina bridge): A retrospective study // J Esthet Restor Dent. – 2021;33(3):480-486. https://doi.org/10.1111/jerd.12670.
10. Keulemans F., Shinya A., Lassila Lippo V.J., Vallittu Pekka K., Kleverlaan Cornelis J., Feilzer Albert J., De Moor Roeland J.G. Three-dimensional finite element analysis of anterior two-unit cantilever resin-bonded fixed dental prostheses // ScientificWorldJournal. – 2015;2015:864389. https://doi.org/10.1155/2015/864389
11. Kravitz Neal D. The Maryland bridge retainer: A modification of a Maryland bridge // Am J Orthod Dentofacial Orthop. – 2020;157(1):128-131. https://doi.org/10.1016/j.ajodo.2019.08.007.
12. Kuijs Ruud, van Dalen Andy, Roeters Joost, l Wismeijer Danie. The Resin-Bonded Fixed Partial Denture as the First Treatment Consideration to Replace a Missing Tooth // Int J Prosthodont. – 2016;29(4):337-339. https://doi.org/10.11607/ijp.4412.
13. Lam Walter Y.H., Chan Ronald S.T., Li K.Y., Tang K.T., Lui T.T., Botelho M.G. Ten-year clinical evaluation of posterior fixed-movable resin-bonded fixed partial dentures // J Dent. – 2019;86:118-125. https://doi.org/10.1016/j.jdent.2019.06.003
14. Li Xin, Zhu Zhi-Min, Li Zi-Yan, Zhou Jin-Ru, Chen Wen-Chuan. All-ceramic premolar guiding plate retains resin-bonded fixed partial dentures // Hua Xi Kou Qiang Yi Xue Za Zhi. – 2019;1;37(3):285-289. https://doi.org/10.7518/hxkq.2019.03.011.
15. Najafi A., Ashraghi M., Chou J.-C., Morton D., Zandinejad A. Survival of cast-metal, resin-bonded fixed partial dental prostheses after nearly 20-year follow-up: A retrospective study // J Prosthet Dent. – 2016;116(4):507-515. https://doi.org/10.1016/j.prosdent.2016.02.021.
16. Penteado M.M., Tribst João P.M., Jurema Ana L.B., Saavedra Guilherme S.F.A., Borges Alexandre L.S. Influence of resin cement rigidity on the stress distribution of resin-bonded fixed partial dentures // Comput Methods Biomech Biomed Engin. – 2019;22(10):953-960. https://doi.org/10.1080/10255842.2019.1609456
17. Qiu Hai-Yan, Wu Shuang-Yan, Fu Lan. Clinical performance of cantilevered resin-bonded fixed partial dentures for single tooth replacement in elderly patients // J Int Med Res. – 2020;48(10):300060520956810. https://doi.org/10.1177/0300060520956810
18. Tanoue N., Matsumura H., Yamamori T., Ohkawa S. Longevity of resin-bonded fixed partial dentures made of metal alloys: A review of the literature // J Prosthodont Res. – 2021;21;65(3):267-272. https://doi.org/10.2186/jpr.JPR_D_20_00122
19. Ya-Ru Wei, Xiao-Dong Wang, Qin Zhang, Xiang-Xia Li, Markus B Blatz, Yu-Tao Jia, Ke Zhao. Clinical performance of anterior resin-bonded fixed dental prostheses with different framework designs: A systematic review and meta-analysis // J Dent. – 2016;47:1-7. https://doi.org/10.1016/j.jdent.2016.02.003.
20. Zhang Xinyan, Li Tong, Wang Xiaoxi, Yang Lili, Wu Junling. Glass-ceramic resin-bonded fixed partial dentures for replacing a single premolar tooth: A prospective investigation with a 4-year follow-up // J Prosthet Dent. – 2020;124(1):53-59. https://doi.org/10.1016/j.prosdent.2019.07.007
