Voronezh, Voronezh, Russian Federation
Russian Federation
Russian Federation
UDK 519 Комбинатор. анализ. Теория графов. Теория вер. и мат. стат. Вычисл. мат., числ. анализ. Мат. кибер..
The paper presents the modeling of the solution to one of the problems of mechanics - the automated control of the manipulator used in the forestry industry for moving operations at various stages of the technological process. A unified model has been developed that allows generating control actions and energy consumption of the object under study. As a result of solving the problem, a system of equations was obtained for determining the control moment and control force, which allow the manipulator to be set in motion, as well as to determine the energy consumption for the implementation of the program motion, in which the load moves at a given speed from point a to point b along a straight line inclined at a given angle to the horizon. The proposed algorithm is generalized for solving computer-aided design problems and is a simulation experiment. The software solution is implemented in two forms. In the first module, the database is filled with the initial metric, angular and physical and mathematical characteristics of the manipulator. In the second, according to the unified model described above, the indicators are calculated that are necessary for the movement of the object and characterize the dynamics of movement, as well as the necessary energy consumption for performing the operations performed. The possibility of converting the calculated values from the database into an MS Excel table is provided.
Modeling, manipulator, design, control, automation, energy consumption, information technology
1. Yudina, N.Yu. Modelirovanie i optimizaciya processa lesosechnyh rabot pri rubkah uhoda v malolesnyh rayonah / N.Yu. Yudina // Lesotehnicheskiy zhurnal. – 2013. – № 2 (10). – S. 101-110.
2. Lapshina, M.L. Adaptaciya dekompozicionnogo podhoda k problemam soglasovaniya optimal'nyh planov / M.L. Lapshina, A.S. Chernyh, N.Yu. Yudina // Modelirovanie, optimizaciya i informacionnye tehnologii. – 2017. – № 3 (18). – S. 17.
3. Yudina, N.Yu. O programmnoy realizacii metoda konechnyh elementov na primere dvumernoy zadachi ploskogo napryazhennogo sostoyaniya / N.Yu. Yudina, A.V. Vodyanickiy // Modelirovanie sistem i processov. –2018. – T. 11, № 1. – S. 68-73. – DOI: 10.12737/article_5b574c80302045.38772751.
4. Yudina, N.Yu. Programmnaya realizaciya modulya "sozdanie i vedenie baz dannyh" informacionnoy sistemy proektirovaniya tehnologicheskogo processa lesozagotovok / N.Yu. Yudina, T.I. Kolupaeva, A.Yu. Lemeshko // Modelirovanie sistem i processov. – 2015. – T. 8, № 1. – S. 75-80. - DOI: 10.12737/12030.
5. Harakterizaciya i modelirovanie signalov v SAPR / V.A. Sklyar, V.K. Zol'nikov, A.I. Yan'kov [i dr.] // Modelirovanie sistem i processov. – 2018. – T. 11, № 1. – S. 62-67. - DOI: 10.12737/article_5b574c7fd2b815.56868481.
6. Lavlinskiy, V.V. Teoreticheskie osnovy formirovaniya modeley i metodov vzaimodeystviya informacionnyh processov / V.V. Lavlinskiy, I.I. Strukov // Modelirovanie sistem i processov. – 2018. – T. 11, № 2. – S.31-37. - DOI: 10.12737/article_5b57794b9ae122.37725395.
7. Oksyuta O.V., Formalizaciya problemy upravleniya v usloviyah neopredelennosti / O.V. Oksyuta, A.L. Kurina // Modelirovanie sistem i processov. – 2018. – T. 11, № 3. – S. 60-67. - DOI: 10.12737/article_5c4f1988298899.16643928.
8. Dynamic creation of the optimum program motion of a manipulator-tripod / V. Zhoga, V. Gerasun, I. Nesmiyanov [et al.] // Journal of Machinery Manufacture and Reliability. – 2015. - Vol. 44. – Pp. 180-185. – DOI: 10.3103/S1052618815020168.
9. Analysis of special positions of parallel structure mechanisms for aggressive media / G.V. Rashoyan, M.F. Slavutin, S.A. Sheptunov [et al.] // 2016 IEEE Conference on Quality Management, Transport and Information Security, Information. – 2016. – Pp. 160-163. - DOI:10.1109/ITMQIS.2016.7751948.
10. Kung, Y.S. Design and implementation of a control IC for vertical articulated robot arm using SOPC technology / Y.S. Kung, G.S. Shu // IEEE International Conference on Mechatronics, ICM '05. - 2005. – Pp. 532-536. – DOI: 10.1109/ICMECH.2005.1529314.
11. Hinikadze, T.A. Modelirovanie gidravlicheskoy sistemy ustroystva s samoadaptaciey po silovym i kinematicheskim parametram na rabochem organe / T.A. Hinikadze, A.T. Rybak, P.I. Popikov // Advanced Engineering Research. – 2021. – T. 21, № 1. – S. 55-61. – DOI: 10.23947/2687-1653-2021-21-1-55-61.
12. Nurmi, J. Global energy-optimal redundancy resolution of hydraulic manipulators: experimental results for a forestry manipulator / J. Nurmi, J. Mattila // Energies. – 2017. – Vol. 10, № 5. – S. 647. – DOI: 10.3390/en10050647.
13. Optimizaciya gidravlicheskih parametrov pod'emnogo mehanizma manipulyatora gruzovogo avtomobilya / P.I. Popikov, A.S. Chernyh, I.V. Chetverikova [i dr.] // RESOURCES AND TECHNOLOGY. – 2017. - T. 14, № 4. - S. 43-65. - DOI: 10.15393/j2.art.2018.4021.
14. Matematicheskoe modelirovanie processov v sisteme gidroprivoda lesnyh manipulyatorov / P.I. Popikov, P.I. Titov, A.A. Sidorov [i dr.] // Politematicheskiy setevoy elektronnyy nauchnyy zhurnal Kubanskogo gosudarstvennogo agrarnogo universiteta. - 2011. - № 69. - S. 96-106. - Rezhim dostupa: http://ej.kubagro.ru/2011/05/pdf/25.pdf.
15. Svidetel'stvo o registracii programmy dlya EVM RU 2019662779. Programma podbora parametrov gidroprivoda lesnyh mashin : zayavl. 23.09.2019 ; opubl. 02.10.2019 / N.Yu. Yudina, A.N. Chernikov, R.V. Yudin ; zayavitel' i patentoobladatel' FGBOU VO «VGLTU».
16. Quang, L.H. Robust control of a multi-degree-of-freedom electromechanical plant with adaptive disturbance compensation / L.H. Quang, V.V. Putov, V.N. Sheludko // Journal of Physics: Conference Series. – 2021. – Vol. 1864. – 012083. - DOI: 10.1088/1742-6596/1864/1/012083.
17. Robust control of multi degree-of-freedom mehanical plant with adaptive disturbance compensation / L.H. Quang, V.V. Putov, V.N. Sheludko // XXIII International Conference on soft computing and measurements, SCM. - 2020. - Pp. 242-245. - DOI: 10.1109/SCM50615.2020.9198778.
18. Quang, L.H. Adaptive robust control of a multi-degree-of-freedom indefinite nonlinear electromechanical plant with adaptive compensation of disturbances / L.H. Quang, V.V. Putov, V.N. Sheludko // 2020 International Multi-Conference on Industrial Engineering and Modern Technologies, FarEastCon 2020. - 2020. - S. 9271203. - DOI: 10.1109/FarEastCon50210.2020.9271203.
19. Quang, L.H. Multi-degree-of-freedom nonlinear mechanical plant adaptive control / L.H. Quang, V.V. Putov, V.N. Sheludko // 2020 International Multi-Conference on Industrial Engineering and Modern Technologies, FarEastCon 2020. - 2020. - S. 9271415. - DOI: 10.1109/FarEastCon50210.2020.9271415.
20. Quang, L.H. Adaptive robust control of a multi-degree electromechanical object with elastic properties / L.H. Quang, V.V. Putov, V.N. Sheludko // Proceedings - 2020 2nd International Conference on Control Systems, Mathematical Modeling, Automation and Energy Efficiency, SUMMA 2020. - 2020. - S. 570-575. - DOI: 10.1109/SUMMA50634.2020.9280588.
21. Quang, L.H. Adaptive control of rigid multi-degree-of-freedom nonlinear mechanical plants/ L.H. Quang, V.V. Putov, V.N. Sheludko // Journal of Physics: Conference Series. – 1021. – Vol. 1864. – 012084. – DOI: 10.1088/1742-6596/1864/1/012084.
