graduate student from 01.01.2019 to 01.01.2022
Cheboksary, Cheboksary, Russian Federation
Cheboksary, Russian Federation
Yoshkar-Ola, Russian Federation
Cheboksary, Russian Federation
Issues of manufacturing activity of polymer products that affect the parameters of finished goods, maintaining its long-run serviceability, are viewed. It possess of the factors influencing the technological process, such as condition of the equipment, technological parameters, and quality of raw materials. Attention is paid to the qualification of personnel involved in the manufacturing activity and proper management of production at the stage of raw material storage and preparing them for the operating cycle.
depreciation, technological equipment, polymer materials, production quality
1. Melloy, R.A. Konstruirovanie plastmassovyh izdeliy dlya lit'ya pod davleniem / per. s angl. yaz. / pod. red. V.A. Braginskogo, E.S. Cobkallo, G.V. Komarova. – SPb.: Professiya, 2006. – 512 s.
2. Fisher, D.M. Usadka i koroblenie otlivok iz termoplastov: Spravochnik. – SPb.: Professiya, 2009. – 424 s.
3. Bihler, M. Detali iz plastmass otlivat' bez defektov. – Geydel'berg: Hyutig GmbH, 1999. – 110 s.
4. Barvinskiy, I.A., Barvinskaya, I.E. Lit'e plastmass. Spravochnaya informaciya dlya konstruktorov i tehnologov. Versiya 1.2.4. – M.: OOO «Inzhenernaya firma AB Universal», 2004.
5. Al'shic, I.Ya., Blagov, B.N. Proektirovanie detaley iz plastmass. Spravochnik. izd. 2-e, pererab. i dop. – M.: Mashinostroenie, 1977.
6. Panteleev, A.P., Shevcov, Yu.M., Goryachev, I.A. Spravochnik po proektirovaniyu osnastki dlya pererabotki plastmass. – M.: Mashinostroenie, 1986.
7. Filatov, V.I., Korsakov, V.D. Tehnologicheskaya podgotovka processov formovaniya izdeliy iz plastmass. – L.: Politehnika, 1991.
8. OBK 587.002 TI. Detali iz plastmass. Tehnicheskie trebovaniya.
9. BKZhI.640101.001 TI. Tehnicheskie trebovaniya izgotovleniya plastmassovyh detaley.
10. GOST 24105-80 Izdeliya iz plastmass. Terminy i opredeleniya defektov.
11. GOST 27358-87 Press-formy dlya izgotovleniya izdeliy iz plastmass. Obschie tehnicheskie usloviya.
12. GOST 14901-93 Press-formy dlya izgotovleniya rezinotehnicheskih izdeliy. Obschie tehnicheskie usloviya.
13. Panov, A.Yu., Sataeva, D.M., Brehova, A.A. Vliyanie raboty oborudovaniya na kachestvo i effektivnost' proizvodstva izdeliy iz plastmass // Trudy NGTU im. R.E. Alekseeva. – 2018. – №1 (120). – S. 212-222.
14. Salahova, R.K., Tihoobrazov, A.B. Termostoykost' elektroliticheskih hromovyh pokrytiy // Aviacionnye materialy i tehnologii. – 2019. – №2 (55). – S. 60-67.
15. Tatanov, P.V., Yanyushkin, A.R., Shnayder, D. A., Yanyushkin, A.S. Opyt elektroerozionnogo frezerovaniya na AO «Cheboksarskiy elektroapparatnyy zavod» // Aktual'nye problemy v mashinostroenii. – 2021. – T. 8. – № 3-4. – S. 57-62.
16. Yanyushkin, A.R., Lobanov, D.V., Tatanov, P.V. Sovershenstvovanie processa elektroalmaznogo shlifovaniya // Elektrofizicheskie metody obrabotki v sovremennoy promyshlennosti: Mater. IV MNTK molodyh uchenyh, aspirantov i studentov. – Perm': PNIPU, 2021. – S. 144-148.
17. Tatanov, P.V., Yanyushkin, A.R., Sherov, K.T., Yanyushkin, A.S. Ispol'zovanie vtorichnogo resursa tverdosplavnyh smennyh mnogogrannyh plastin v metalloobrabotke» // Nauka i tehnika Kazahstana. – 2021. – № 1. – S. 85-96.
18. Tatanov, P.V., Yanyushkin, A.R., Shnayder, D.A., Yanyushkin, A.S. Vliyanie orbital'nogo dvizheniya elektroda na tochnost' elektroerozionnoy obrabotki // iPolytech Journal. – 2021. – №25 (5). – S. 559-567.
19. Tatanov, P.V. Podgotovka kadrov na sovremennom predpriyatii // Sb.: Professional'no-orientirovannye tehnologii v sovremennom obrazovanii: problemy i poiski. – Ul'yanovsk, 2021. – S. 83-87.
20. Tatanov, P.V., Chemerilova, I.A. Kadrovye problemy na zavodah i fabrikah // Tendencii razvitiya nauki i obrazovaniya. – 2022. – №81-4. – S. 120-123.
