employee
Chita, Chita, Russian Federation
UDK 629.463 Грузовые вагоны
BBK 392 Железнодорожный транспорт
The paper objective is to estimate the damage to the automatic coupling device of freight cars in operation. A statistical analysis of auto-coupling breaks on roads and a statistical estimation of nondestructive testing of auto-coupling device parts are carried out. During the analysis, it is found that 68% of breaks occur due to the presence of cracks in the body of the automatic coupler, 60% of breaks of the automatic couplers occur in areas where the track has a slope, including the mountain pass areas and 77% of breaks occur in the train traction mode. The scientific novelty is in obtaining a logarithmically normal law of the crack length distribution in the coupling body and traction clamp during the operation of the car in the overhaul period. The most likely crack formation in the body of the automatic coupling during the operation of the car between scheduled repairs is 41 mm long, in the traction clamp it is 63 mm. The practical significance of the work is in the fact that the obtained results can be used in making recommendations and organization of technical measures to reduce the cases of auto-coupling breaks and increase the quality of repair and maintenance of the auto-coupling device.
auto-coupling device, clamp, crack, probability level, overhaul period
1. Savrukhin AV. Improving the designs of massive bearing parts of rolling stock based on the analysis of the stress-strain state under operational and technological influences [dissertation]. [Moscow (RF)]; 2005.
2. Bobrov AL, Danilina AA. Statistical evaluation of non-destructive testing of auto coupling device parts at car repair enterprises. Russian Railway Science Journal. 2012;6:57-61.
3. Ivanova TV, Nalabordin DG. Evaluation of pre-failure condition of the freight car axle box. Wagoni I Wagonnoe Khozyaistvo. 2017;1(49):46-47.
4. Kovrigina IV. Determination of the inter-repair resource of a freight car. Nauka I obrazovanie Transportu. 2017;1:45-48.
5. Stupin DA, Sharnenkov NG. The history of the development of absorbing devices. Wagoni I Wagonnoe Khozyaistvo. 2017;2(50):38-40.
6. Savushkin RA, Kudryavtsev MA, Ponomarev SA. Automatic coupling Ca-3T for heavy-freight cars: design features and manufacturing technology. Wagoni I Wagonnoe Khozyaistvo. 2018;1(53):30-32.
7. Nalabordin DG, Ivanova TV, Petrov VA. Evaluation of stability of large-capacity empty containers on a railway platform in extreme weather conditions. Transport Infrastructure of the Siberian Region. 2018;2:308-315.
8. Boldyrev AP, Stupin DA, Gurov AM. Main tendencies of developing and implementing new constructions of automatic coupling cushioning devices of freight cars. Proceedings of Petersburg Transport University. 2018;15(1):30-35.
9. Rozhkova EA. Assessment and forecasting of freight car technical state. Bulletin of Bryansk State Technical University. 2021;5(102):40-47.
10. Bekher SA, Bobrov AL, Bolchanov AA. Analysis of the results of non-destructive testing during depot repair of freight car truck parts. Vestnik Rostovskogo Gosudarstvennogo Universiteta Putey Soobshcheniya. 2011;2(42):20-26.
11. Mironenko OI, Krivich OYu, Monakhova OV, Sadykova OI. Some issues of modeling technological processes for the repair of car automatic coupling devices. Sovremennie Problemi Zheleznodorozhnogo Ttansporta; 2019.
