Article is devoted to the design and manufacturing of high laminated wooden beams with the definition of the boundaries of the gain maximum stressed zones adhesive oligomer based on carbon nanotubes (CNT). The use of high glulam beams with a ratio h/b≥6 construction in areas with large and technologically snow-loads of a new development related to the development of the northern territories. One of the ways to increase the operational reliability of glulam beam structures is to enhance support areas, which increases the strength characteristics and resistance to shearing and tensile stresses.
technology, glued wooden structures, the oligomer is based on carbon nanotubes support zone, latin square, vacuum infusion.
1. Labudin, B. V. Sovershenstvovanie kleenykh derevyannykh konstruktsiy s prostranst-venno-regulyarnoy strukturoy [Tekst] : monogr. / B. V. Labudin. – Arkhangel´sk : Izd-vo AG-TU, 2007. – 267 s.
2. Labudin, B.V. Kleenye derevyannye konstruktsii: sostoyanie i problemy razvitiya [Tekst] / Labudin, B.V., Serov E.N.. IVUZ. «Lesnoy zhurnal». – 2013. – № 2. – 6 s.
3. Roshchina, S. I. Prochnost´ i deformativnost´ kleenykh armirovannykh derevyannykh konstruktsiy pri dlitel´nom deystvii nagruzki [Tekst] : dis. … dokt. tekhn. nauk: 05.23.01 / S. I. Roshchina. – M. : MGAKKhiS, 2009. – 324 s.
4. Roshhina, S. I. Allowance for creep in the study of the reinforced wood-based constructions [Text] / S. I. Roshhina, M. V. Lukin, P. B. Shohin, M. S. Sergeev, M. S. Lisyatnikov. Life Science Journal. – 2014. – no. 11 (9s). – pp. 192-195.
5. Sergeev, M. S. Sovershenstvovanie tekhnologii izgotovleniya derevyannykh konstruk-tsiy s termouprochneniem kraevykh zon [Tekst] : dis.... kand. tekhn. nauk: 05.21.05 / M. S. Ser-geev. – Arkhangel´sk, 2013. – 173 s.
6. Shilin, A. A. Vneshnee armirovanie zhelezobetonnykh konstruktsiy kompozitsionnymi materialami [Tekst] / A. A. Shilin, V. A. Pshenichnyy, D. V. Kartuzov. – M. : OAO «Izdatel´stvo «Stroyizdat», 2007. – 184 s.
7. Shokhin, P. B. Povyshenie ekspluatatsionnoy nadezhnosti derevokompozitnykh balochnykh konstruktsiy [Tekst] : dis.... kand. tekhn. nauk: 05.21.05 / P. B. Shokhin. – Arkhangel´sk, 2012. – 163 s.
8. Charleta, K. Improvement of wood polymer composite mechanical properties by direct fluorination [Text] / K. Charleta, F. Saulniera, M. Duboisb, A. Béakoua. Materials & Design, 2015. – pp. 61-66.
9. Youngquis, J. A. Solid wood products [Text] / J. A. Youngquis, //Encyclopedia of Forest Sciences, 2004. – pp. 1331-1338.
10. Yue-Jun Yin Probabilistic loss assessment of light-frame wood construction subjected to combined seismic and snow loads [Text] / Yue-Jun Yin, Yue Li. Engineering Structures, 2011. – pp. 380-390.
