OIL LUBRICOOLANTS FOR BROACHING OPERATIONS WITH IMPROVED TRIBO-ENGINEERING AND COOLING CHARACTERISTICS

Denis Tyulenev; Olga Kornilova; Semyon Pilyugin; Andrey Sholom; Aleksey Abramov

doi:doi:10.30987/2782-5957-2023-12-56-62

VAK Russia 2.5.3 UDC 621.89.09 Russian Library and Bibliographic Classification 344

OIL LUBRICOOLANTS FOR BROACHING OPERATIONS WITH IMPROVED TRIBO-ENGINEERING AND COOLING CHARACTERISTICS

Published в Transport engineering · Volume 2023, Issue 12, 2023 · Pages 56–62 · Rubrics: Mechanical engineering

DOI 10.30987/2782-5957-2023-12-56-62

Received: 10.11.2023 Accepted: 23.11.2023 Published: 27.12.2023

Authors

Denis Tyulenev ¹ · Olga Kornilova ² · Semyon Pilyugin ³ · Andrey Sholom ⁴ · Aleksey Abramov ⁵

1 Self-supporting Creative Center of Ufa Aviation Institute (Head of the Tribo-engineering Laboratory)
Ufa, Ufa, Russian Federation

2 Self-supporting Creative Center of Ufa Aviation Institute (Research Associate)
Ufa, Ufa, Russian Federation

3 Self-supporting Creative Center of Ufa Aviation Institute (Senior Research Associate)
Ufa, Ufa, Russian Federation

4 Self-supporting Creative Center of Ufa Aviation Institute (Research Engineer)
Ufa, Ufa, Russian Federation

5 Self-supporting Creative Center of Ufa Aviation Institute (Deputy Director General)
Ufa, Ufa, Russian Federation

ABSTRACT

The paper objective is to test the developed lubricoolants of domestic production for broaching operations instead of imported analogues. The results of comparative laboratory tests of new technological lubricoolants Rosoil-V9 and Rosoil-423M for broaching operations, which are analogues of imported coolant, are presented. Laboratory tests are carried out in the Laboratory for Testing Technological Lubricants of Self-supporting Creative Center of Ufa Aviation Institute. Tribo-engineering properties are determined on a four-ball friction machine according to GOST 9490-75; cooling characteristics are determined on UZS-2 installation. The physicochemical properties are evaluated by standard test methods. As a result of the conducted research, it is found out that the physicochemical properties of Rosoil lubricoolants are similar to imported ones, and in terms of tribo-engineering and cooling characteristics, Rosoil lubricoolants are better than imported analogues.

KEYWORDS

broaching operations properties laboratory tests

Information

Authors:

1. Self-supporting Creative Center of Ufa Aviation Institute (Head of the Tribo-engineering Laboratory)

Ufa, Ufa, Russian Federation

2. Self-supporting Creative Center of Ufa Aviation Institute (Research Associate)

Ufa, Ufa, Russian Federation

3. Self-supporting Creative Center of Ufa Aviation Institute (Senior Research Associate)

Ufa, Ufa, Russian Federation

4. Self-supporting Creative Center of Ufa Aviation Institute (Research Engineer)

Ufa, Ufa, Russian Federation

5. Self-supporting Creative Center of Ufa Aviation Institute (Deputy Director General)

Ufa, Ufa, Russian Federation

Type:

Article

Pages:

from 56 to 62

Status:

Published

Subject area:

VAK Russia 2.5.3
UDC 621.89.09
Russian Library and Bibliographic Classification 344

Language:

Russian

Keywords:

broaching, operations, properties, laboratory tests

References

1. Entelis SG. Lubricating and cooling agents for cutting metals: handbook. Moscow: Mashinostroenie; 1986.

2. Chekmarev VV. Cutting of structural materials: a short course of lectures. Ground transport and technological complexes. Saratov: Saratov State Vavilov Agrarian University; 2016.

3. Khudobin LV, Babichev AP, Bulyzhev EM. Lubricating and cooling agents and their application in cutting process: handbook. Moscow: Mashinostroenie; 2006.

4. Shashin AD. Study of lubricant influence on the interaction between tools and workpiece in metal cutting [dissertation]. [Moscow (RF)]: Moskovsky Gosudarstvenny Industrialny Universitet; 2003.

5. Berdichevsky UG. Lubricating and cooling agents for processing materials: handbook. Moscow: Mashinostroenie; 1984.

6. TU 27.90.11-128-06377289-2016. Installation for determining the cooling characteristics of technological and quenching media. Specification.

7. ISO 9950. International standard Industrial quenching oils - Determination of cooling characteristics.

8. Sholom AV, Pilyugin SM, Abramov AN, Sholom VYu, Tyulenev DG. Influence of cooling characteristics of oil lubricants on their tribo-engineering properties. Proceedings of the XIV International Scientific and Technical Conference dedicated to the 100th anniversary of the birth of AP Semenov, 2022: Tribology - Mechanical Engineering; Moscow; 2022.

9. Sholom AV, Polyakov AB, Tyulenev DG. RF Patent for invention No. 2699698 IPC C21D 11/00 G01N 25/20 Installation for determining the cooling capacity of a technological medium. 2019 Sep 09.

Доступ и загрузка

🗂 JATS XML ❝ To cite 📎 Citations

—

Views

—

Downloads

Citations

Индексируется в

OIL LUBRICOOLANTS FOR BROACHING OPERATIONS WITH IMPROVED TRIBO-ENGINEERING AND COOLING CHARACTERISTICS

Confirmation

Регистрация