USING GRADIENT METHODS TO OPTIMIZE THE CALCULATION OF PROCESSING MODE PARAMETERS

Steposhina Svetlana; Fedonin Oleg; Siyanov Sergey

doi:doi:

Home / Conferences / Ensuring and improving the quality of engineering and aerospace products / Ensuring and improving the quality of engineering and aerospace products

USING GRADIENT METHODS TO OPTIMIZE THE CALCULATION OF PROCESSING MODE PARAMETERS

Submit manuscript

To cite

USING GRADIENT METHODS TO OPTIMIZE THE CALCULATION OF PROCESSING MODE PARAMETERS

Section: ENSURING AND IMPROVING THE QUALITY OF MACHINE-BUILDING AND AEROSPACE PRODUCTS IN THE PROCESS OF PRODUCTION PREPARATION

Proceedings: ENSURING AND IMPROVING THE QUALITY OF ENGINEERING AND AEROSPACE PRODUCTS

VAC 05.02.2000 Машиностроение и машиноведение

UDK 62 Инженерное дело. Техника в целом. Транспорт UDK 65 Управление предприятиями. Организация производства, торговли и транспорта

GRNTI 55.01 Общие вопросы машиностроения

Steposhina Svetlana ¹

Fedonin Oleg ²

Siyanov Sergey ³

Author and publication information

Authors:

1. Bryansk State Technical University (Department of Automated Technological Systems, Associate Professor)
Bryansk, Bryansk, Russian Federation

2. Bryansk State Technical University (Rector, Professor)
Bryansk, Bryansk, Russian Federation

3. Bryansk State Technical University (kafedra «Avtomatizirovannye tehnologicheskie sistemy», docent)
Bryansk, Bryansk, Russian Federation

Type:

Сonference article

Published:

13.04.2020

Subject area:

05.02.2000
62
65
55.01

Language:

Russian

Keywords:

optimization, gradient descent method, penalty function method, iteration step

Abstract and keywords

Abstract (English):
Recommendations on using gradient descent and penalty functions to optimize the selection of cutting mode parameters based on the criteria of maximum performance are presented.the results of calculations are presented.

Keywords:
optimization, gradient descent method, penalty function method, iteration step

References

1. Amosov, A.A. Vychislitel'nye metody dlya inzhenerov: ucheb. posobie / A.A. Amosov, Yu.A. Dubinskiy, N.V. .Kopchenova. - M.: Vyssh. shk., 1994. - 544s. - ISBN 5-06-000625-5.

2. Biryukov, R.S. Metody optimizacii v primerah i zadachah: uchebno-metodicheskoe posobie/ R.S. Biryukov [i dr.]. - Nizhniy Novgorod: Nizhegorodskiy gosuniversitet, 2010. - 101 s. - ISBN 676-07-1225-1915-3.

3. Grebennikova, I.V. Metody optimizacii : ucheb. posobie/ I. V. Grebennikova. - Ekaterinburg : UrFU, 2017. - 148 s. - ISBN 978-5-7996-2090-5.

4. Rekleytis, G. Optimizaciya v tehnike: per s angl. v 2 kn. Kn. 1. / G. Rekleytis, A. Reyvindran, K. Regsdel. - M.: Mir, 1986. - 350s. - ISBN 041-01-86-154-86.

5. Ryzhov, E.V. Optimizaciya tehnologicheskih processov mehanicheskoy obrabotki/ E.V. Ryzhov, V.I. Averchenkov. - Kiev: Nauk. dumka, 1989.- 192s. - ISBN 5-12-000920-4.

6. Steposhina, S.V., Opredelenie matematicheskih modeley dlya vybora racional'nyh usloviy obrabotki PPD/ S.V. Steposhina, O.N. Fedonin // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta.- 2015. № 2 (46). S. 82-86. - ISSN: 1999-8775.

Submit manuscript

To cite

Citations:

Confirmation

Регистрация