RESEARCH OF THE PROCESSES OF NON-ISOTHERMAL FLOW OF MELTING OF A PROPYLENE BLOCKOPOLYMER WITH ETHYLENE IN THE CABLE HEAD CHANNEL
Section: MECHANICS AND CONTROL PROCESSES
Proceedings: PROBLEMS OF APPLIED MECHANICS
Authors:
1.
Perm National Research Polytechnic University
, Russian Federation
, Russian Federation
2.
Perm National Research Polytechnic University
, Russian Federation
, Russian Federation
3.
Perm National Research Polytechnic University
, Russian Federation
, Russian Federation
Type:
Сonference article
Published:
10.12.2020
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
contact mechanics of engineering surfaces, friction and wear of interfaces, tribotechnical materials science, mechanics and control processes, kinematics, dynamics, strength and reliability of machines and structural elements
Abstract (English):
The article is devoted to the numerical study of the processes of nonisothermal melt flow of a block copolymer of propylene with ethylene in the channels of the forming tool of cable heads when two-layer insulation is applied. The influence of technological parameters on the fields of speeds and temperatures is determined
The article is devoted to the numerical study of the processes of nonisothermal melt flow of a block copolymer of propylene with ethylene in the channels of the forming tool of cable heads when two-layer insulation is applied. The influence of technological parameters on the fields of speeds and temperatures is determined
Keywords:
contact mechanics of engineering surfaces, friction and wear of interfaces, tribotechnical materials science, mechanics and control processes, kinematics, dynamics, strength and reliability of machines and structural elements
contact mechanics of engineering surfaces, friction and wear of interfaces, tribotechnical materials science, mechanics and control processes, kinematics, dynamics, strength and reliability of machines and structural elements
1. Peshkov I.B. Materialy kabel'nogo proizvodstva. – M.: Mashinostroenie, 2013. – 456 s.
2. Tadmor Z., Gogos K. Teoreticheskie osnovy pererabotki polimerov. – M.: Himiya, 1984. – 632 s.
3. Rauvendal' K. Ekstruziya polimerov – SPb.: Professiya, 2008. – 786 s.
4. Soloveychik Yu.G., Royak M.E., Persova M.G. Metod konechnyh elementov dlya resheniya skalyarnyh i vektornyh zadach: uchebnoe posobie. Novosibirsk: Izd-vo NGTU, 2007. 895 s.
5. Bate K.Yu. Metody konechnyh elementov. M.: Fizmatlit, 2010. 1022 s.
