PROBLEMS IN ESTIMATE OF PARTS GEOMETRICAL ACCURACY
Authors:
1.
Blagonravov FSBIS IMACH RAS
( Chief researcher)
Moskva, Russian Federation
Moskva, Russian Federation
Type:
Article
Pages:
from 8
to 12
Status:
Published
Received:
16.03.2018
Accepted:
07.01.2023
Published:
19.04.2018
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian, English
Keywords:
accuracy, error, geometry, part, surface, profile, form, dimension
Abstract (English):
The paper reports the analysis of the method for parts geometrical accuracy definition which includes the following stages: part surfaces measurement, a representation of measurement results and their relative position, a definition without errors count and a definition of surface errors. There are shown drawbacks of stages enumerated such as a neglect of measurement base surface errors, an ambiguity of measurement base positions regarding surfaces under control, use of bases of error account and criteria for errors estimate irrespective of surface operation functions. A multi-gradation of the method for the estimate of a part error resulting in the accumulation of total error is shown.
The paper reports the analysis of the method for parts geometrical accuracy definition which includes the following stages: part surfaces measurement, a representation of measurement results and their relative position, a definition without errors count and a definition of surface errors. There are shown drawbacks of stages enumerated such as a neglect of measurement base surface errors, an ambiguity of measurement base positions regarding surfaces under control, use of bases of error account and criteria for errors estimate irrespective of surface operation functions. A multi-gradation of the method for the estimate of a part error resulting in the accumulation of total error is shown.
Keywords:
accuracy, error, geometry, part, surface, profile, form, dimension
accuracy, error, geometry, part, surface, profile, form, dimension
1. Bazrov, B.M. Machine Accuracy Computation. – M.: Mechanical Engineering. 1984. – pp. 256.
2. RSS 10356-63 “Deviation of Surface Form and Loca-tion. Basic Definitions. Limiting Deviations”. Moscow, - 1963.
