Journals Conferences Monographies Textbooks Regulatorys Event GQW
Submit manuscript
Home / Journals / Science intensive technologies in mechanical engineering / Rubric TECHNOLOGICAL PROCESSES AUTOMATED CONTROL (archived)

Articles of rubric " TECHNOLOGICAL PROCESSES AUTOMATED CONTROL (ARCHIVED) " of journal " SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING "

URGENCY OF “INDUSTRY 4.0” CONCEPT INTRODUCTION IN MODERN MECHANICAL ENGINEERING
TECHNOLOGICAL SUPPORT OF ACCURACY AND QUALITY OF MACHINERY SURFACES AT DESIGNING OF ROUTE-OPERATION ENGINEERING PROCESS BY SYNTHESIS METHOD BASED ON DIMENSIONS TIES ANALYSIS
HIGH TECHNOLOGY IN PLATFORMS LEVELING AND WEIGHING
CURRENT SCIENTIFIC PROBLEM OF EFFICIENCY INCREASE IN MECHANICAL OPERATION BY CYBER-PHYSICAL SYSTEMS INTRODUCTION WITHIN “INDUSTRY 4.0” CONCEPT
FROM ADDITIVE PRODUCTION TO SELF-REPRODUCTION OF MACHINES, THEIR UNITS AND PARTS
AUTOMATED TECHNOLOGICAL SYSTEM TO ENSURE CONTACT STIFFNESS OF MACHINE PARTS
SCIENCE INTENSIVE TECHNOLOGY FOR CERAMIC TILE QUALITY CONTROL USING COMPUTER VISION
PROBLEMS OF CONTROL, MONITORING AND DIAGNOSTICS OF COMPLEX MECHATRONIC SYSTEMS IN MECHANICAL ENGINEERING
PROBLEMS IN ESTIMATE OF PARTS GEOMETRICAL ACCURACY
MATHEMATICAL METHODS IN TECHNOLOGICAL DESIGN
SYSTEM FOR AUTOMATED WEAR-RESISTANCE TECHNOLOGICAL CONTROL OF MACHINERY AT CUTTING
CHARACTERISTICS, STRUCTURE, MECHANISMS OF FUNCTIONING AND MODERN ASPECTS OF DIGITAL PRODUCTION SYSTEM INTRODUCTION IN MECHANICAL ENGINEERING
STATISTICAL DIAGNOSTICS OF MEASUREMENTS
COMPLEX APPROACH TO EXPERIMENTAL INVESTIGATIONS OF METAL-WORKING TECHNOLOGICAL SYSTEMS TO ENSURE PARAMETERS OF QUALITY AND OPERATION PROPERTIES OF MACHINERY SURFACES
AUTOMATED QUALITY SUPPORT OF SURFACE AND CONTACT RIGIDITY IN MACHINERY
DEVELOPMENT OF INTELLIGENT AUTOMATED CONTROL SYSTEMS IN MECHANICAL ENGINEERING
IDENTIFICATION OF INDUCTION SENSOR MODEL AND DECONVOLUTION OF INPUT SIGNAL SPECTRUM
DEVELOPMENT OF REQUIREMENTS TO HARDWARE-SOFTWARE COMPLEX OF INTELLIGENCE SYSTEMS OF CONTROL IN MECHANICAL ENGINEERING
CAD TP AND MES INTEGRATION BASED ON THROUGH TECHNOLOGICAL DESIGN
DIAGNOSTIC AND TECHNOLOGICAL METHODS FOR TRACK RELIABILITY INCREASE
CRYPTOGRAPHIC INFORMATION PROTECTION IN DISTRIBUTED CONTROL SYSTEMS
STATE AND DIRECTIONS OF DEVELOPMENT IN FIELD OF PRODUCT DESIGN MANUFACTURABILITY ASSURANCE
INDUSTRY 4.0: «DIGITAL COUNTERPART» AS MEANS FOR EFFECTIVENESS INCREASE OF PRODUCTION SYSTEM
SYNTHESIS OF MANAGEMENT STABILIZING OPERATION MODES OF THERMODYNAMIC SYSTEM
IMPROVEMENT OF INTELLIGENT AUTOMATED CONTROL SYSTEM STRUCTURE BASED ON TECHNOLOGIES OF STRATEGIC, COMPETITIVE AND SITUATION CONTROL
COMPETENCE FORMATION IN EXPERTS OF SCIENCE INTENSIVE TECHNOLOGIES OF PRE-PRODUCTION
PROGRAM BASIS FOR DESIGN OF “TO ORDER” TECHNOLOGICAL EQUIPMEN
SYNERGETIC APPROACH TO MACHINING CONTROL OF LATHE GROUP MACHINES
RETURN ON INVESTMENT (ROI) IN PROJECTS OF INTRODUCTION OF MANUFACTURING EXECUTIVE SYSTEMS (MES) AT RUSSIAN ENTERPRISES
PROBLEMS OF KINEMATIC AND NETWORK MODELING OF FLEXIBLE PRODUCTION CELL
CUTTING EFFECTIVENESS INCREASE AT EXPENSE OF ADAPTIVE CONTROL IN DIGITAL PRODUCTION SYSTEMS
IMPROVEMENT OF HORIZONTAL BORER CONTROL SYSTEM
CURRENT STATE AND TRENDS IN DEVELOPMENT OF TECHNOLOGICAL ENGINEERING PRE-PRODUCTION
DIGITAL PRODUCTION SYSTEM FOR MACHINING PRODUCTION: STRUCTURE, OPERATION, SOFTWARE PRODUCTION-TECHNOLOGICAL COMPLEX AND ANALYSIS OF TECHNICAL AND ECONOMIC EFFECTIVENESS
PRE-PRODUCTION EFFECTIVENESS INCREASE AT HIGH-SPEED HIGH-STRENGTH ALUMINUM PARTS MILLING
CURRENT ASPECTS IN AUTOMATION OF SCIENTIFIC RESEARCHES OF MACHINERY SURFACE QUALITY USING MACHINE LEARNING METHODS
MATHEMATICAL MODEL OF TECHNOLOGICAL MODE ON-LINE CONTROL AT BLADE PROCESSING
SYSTEM APPROACH TO ORGANIZATION OF SPECIALIZED PRODUCTIONS IN MECHANICAL ENGINEERING
EXPANSION OF INFORMATION SUPPORT FOR THE ASSESSMENT OF PRODUCTS MANUFACTURABILITY
MODULAR HARDWARE PLATFORM FOR THE DEVELOPMENT OF INDUSTRIAL INTERNET OF THINGS (IOT) DEVICES
STATE AND OUTLOOKS IN DEVELOPMENT OF TECHNOLOGICAL COMPLEX OF ADDITIVE MANUFACTURING COMPOSITE PARTS
DEVELOPMENT OF STRUCTURE AND FUNCTIONING MECHANISMS OF INFORMATION-EXECUTIVE CYBERPHYSICAL SYSTEMS IN MACHINING PRODUCTION
EXPERIENCE IN CAD SYSTEM INTRODUCTION OF ROLLING-MILL MACHINERY AT URALSMASHZAVOD
Science intensive technologies in mechanical engineering
URGENCY OF “INDUSTRY 4.0” CONCEPT INTRODUCTION IN MODERN MECHANICAL ENGINEERING
Volume, issue
1 № 7 Published
Authors
Ingemansson Aleksandr
DOI
https://doi.org/10.12737/20600
Published
04.07.2016
Science intensive technologies in mechanical engineering
TECHNOLOGICAL SUPPORT OF ACCURACY AND QUALITY OF MACHINERY SURFACES AT DESIGNING OF ROUTE-OPERATION ENGINEERING PROCESS BY SYNTHESIS METHOD BASED ON DIMENSIONS TIES ANALYSIS
Volume, issue
1 № 10 Published
Authors
Polskiy Evgeniy
DOI
https://doi.org/10.12737/21427
Published
09.09.2016
Science intensive technologies in mechanical engineering
HIGH TECHNOLOGY IN PLATFORMS LEVELING AND WEIGHING
Volume, issue
2016 № 11 (65) Published
Authors
Mushkin O. , Trukhanov Vladimir , Nikolaeva N.
DOI
https://doi.org/10.12737/22579
Published
14.11.2016
Science intensive technologies in mechanical engineering
CURRENT SCIENTIFIC PROBLEM OF EFFICIENCY INCREASE IN MECHANICAL OPERATION BY CYBER-PHYSICAL SYSTEMS INTRODUCTION WITHIN “INDUSTRY 4.0” CONCEPT
Volume, issue
2016 № 12 (66) Published
Authors
Ingemansson Aleksandr
DOI
https://doi.org/10.12737/23487
Published
30.12.2016
Science intensive technologies in mechanical engineering
FROM ADDITIVE PRODUCTION TO SELF-REPRODUCTION OF MACHINES, THEIR UNITS AND PARTS
Volume, issue
2017 № 4 (70) Published
Authors
Kheyfets Mikhail
DOI
https://doi.org/10.12737/article_58ef8090231697.44731419
Published
17.04.2017
Science intensive technologies in mechanical engineering
AUTOMATED TECHNOLOGICAL SYSTEM TO ENSURE CONTACT STIFFNESS OF MACHINE PARTS
Volume, issue
2017 № 8 (74) Published
Authors
Suslov Anatoliy , Petreshin Dmitriy , Fedonin Oleg , Khandozhko Viktor
DOI
https://doi.org/10.12737/article_5971e872c26d91.93894036
Published
24.07.2017
Science intensive technologies in mechanical engineering
SCIENCE INTENSIVE TECHNOLOGY FOR CERAMIC TILE QUALITY CONTROL USING COMPUTER VISION
Volume, issue
2018 № 2 (80) Published
Authors
Blokhin Kirill , Matlakhov Vitaliy , Khandozhko Viktor
DOI
https://doi.org/10.12737/article_5a70c1052436b3.52121028
Published
01.02.2018
Science intensive technologies in mechanical engineering
PROBLEMS OF CONTROL, MONITORING AND DIAGNOSTICS OF COMPLEX MECHATRONIC SYSTEMS IN MECHANICAL ENGINEERING
Volume, issue
2018 № 3 (81) Published
Authors
Brzhozovskiy Boris , Bochkarev Petr , Martynov Vladimir , Martynov Pavel
DOI
https://doi.org/10.12737/article_5a8ef9cf8f1e97.91258557
Published
22.02.2018
Science intensive technologies in mechanical engineering
PROBLEMS IN ESTIMATE OF PARTS GEOMETRICAL ACCURACY
Volume, issue
2018 № 4 (82) Published
Authors
Bazrov Boris
DOI
https://doi.org/10.12737/article_5aacd85793bdc2.44830790
Published
19.04.2018
Science intensive technologies in mechanical engineering
MATHEMATICAL METHODS IN TECHNOLOGICAL DESIGN
Volume, issue
2018 № 4 (82) Published
Authors
Tchigirinsky Uyliy
DOI
https://doi.org/10.12737/article_5aacd857b7d411.22186680
Published
19.04.2018
Science intensive technologies in mechanical engineering
SYSTEM FOR AUTOMATED WEAR-RESISTANCE TECHNOLOGICAL CONTROL OF MACHINERY AT CUTTING
Volume, issue
2018 № 5 (83) Published
Authors
Suslov Anatoliy , Petreshin Dmitriy , Fedonin Oleg , Medvedev Dmitriy
DOI
https://doi.org/10.30987/article_5ad8d291cddcd8.06334386
Published
18.05.2018
Science intensive technologies in mechanical engineering
CHARACTERISTICS, STRUCTURE, MECHANISMS OF FUNCTIONING AND MODERN ASPECTS OF DIGITAL PRODUCTION SYSTEM INTRODUCTION IN MECHANICAL ENGINEERING
Volume, issue
2018 № 8 (86) Published
Authors
Ingemansson Aleksandr
DOI
https://doi.org/10.30987/article_5b53640259b448.70821734
Published
06.09.2018
Science intensive technologies in mechanical engineering
STATISTICAL DIAGNOSTICS OF MEASUREMENTS
Volume, issue
2018 № 9 (87) Published
Authors
Moiseev A.
DOI
https://doi.org/10.30987/article_5b71326ccc4726.41056382
Published
01.10.2018
Science intensive technologies in mechanical engineering
COMPLEX APPROACH TO EXPERIMENTAL INVESTIGATIONS OF METAL-WORKING TECHNOLOGICAL SYSTEMS TO ENSURE PARAMETERS OF QUALITY AND OPERATION PROPERTIES OF MACHINERY SURFACES
Volume, issue
2018 № 10 (88) Published
Authors
Suslov Anatoliy , Fedorov Vladimir , Nagorkin Maksim , Pyrikov Igor
DOI
https://doi.org/10.30987/article_5bb4b1f9abbc54.46761484
Published
17.10.2018
Science intensive technologies in mechanical engineering
AUTOMATED QUALITY SUPPORT OF SURFACE AND CONTACT RIGIDITY IN MACHINERY
Volume, issue
2018 № 10 (88) Published
Authors
Petreshin Dmitriy , Khandozhko Viktor
DOI
https://doi.org/10.30987/article_5bb4b1f9ed2366.33601200
Published
17.10.2018
Science intensive technologies in mechanical engineering
DEVELOPMENT OF INTELLIGENT AUTOMATED CONTROL SYSTEMS IN MECHANICAL ENGINEERING
Volume, issue
2018 № 11 (89) Published
Authors
Sukhanova Nataliya
DOI
https://doi.org/10.30987/article_5bd8aa8a8683e5.76305416
Published
30.11.2018
Science intensive technologies in mechanical engineering
IDENTIFICATION OF INDUCTION SENSOR MODEL AND DECONVOLUTION OF INPUT SIGNAL SPECTRUM
Volume, issue
2018 № 12 (90) Published
Authors
Dosko Sergey , Logvin Vladimir , Sheptunov Sergey , Yuganov Evgeniy
DOI
https://doi.org/10.30987/article_5bf70312413968.90524685
Published
08.12.2018
Science intensive technologies in mechanical engineering
DEVELOPMENT OF REQUIREMENTS TO HARDWARE-SOFTWARE COMPLEX OF INTELLIGENCE SYSTEMS OF CONTROL IN MECHANICAL ENGINEERING
Volume, issue
2018 № 12 (90) Published
Authors
Sukhanova Nataliya
DOI
https://doi.org/10.30987/article_5bf702b2d5b4b0.05698577
Published
08.12.2018
Science intensive technologies in mechanical engineering
CAD TP AND MES INTEGRATION BASED ON THROUGH TECHNOLOGICAL DESIGN
Volume, issue
2019 № 1 (91) Published
Authors
Frolov Evgeniy , Kryukov Vasiliy , Volgapkin Alexander
DOI
https://doi.org/10.30987/article_5c1291465e1fd9.89606946
Published
18.01.2019
Science intensive technologies in mechanical engineering
DIAGNOSTIC AND TECHNOLOGICAL METHODS FOR TRACK RELIABILITY INCREASE
Volume, issue
2019 № 1 (91) Published
Authors
Glazunov Dmitry
DOI
https://doi.org/10.30987/article_5c19275f9d3ee4.61908631
Published
18.01.2019
Science intensive technologies in mechanical engineering
CRYPTOGRAPHIC INFORMATION PROTECTION IN DISTRIBUTED CONTROL SYSTEMS
Volume, issue
2019 № 1 (91) Published
Authors
Sukhanova Nataliya
DOI
https://doi.org/10.30987/article_5c12914778c424.41687441
Published
18.01.2019
Science intensive technologies in mechanical engineering
STATE AND DIRECTIONS OF DEVELOPMENT IN FIELD OF PRODUCT DESIGN MANUFACTURABILITY ASSURANCE
Volume, issue
2019 № 2 (92) Published
Authors
Bochkarev Petr , Bokova Larisa
DOI
https://doi.org/10.30987/article_5c486cc4ba27c1.37542277
Published
20.02.2019
Science intensive technologies in mechanical engineering
INDUSTRY 4.0: «DIGITAL COUNTERPART» AS MEANS FOR EFFECTIVENESS INCREASE OF PRODUCTION SYSTEM
Volume, issue
2019 № 2 (92) Published
Authors
Frolov Evgeniy , Parshina Irina , Zaitsev Alexandr , Klimov Aleksandr
DOI
https://doi.org/10.30987/article_5c486cc51ea422.53107269
Published
20.02.2019
Science intensive technologies in mechanical engineering
SYNTHESIS OF MANAGEMENT STABILIZING OPERATION MODES OF THERMODYNAMIC SYSTEM
Volume, issue
2019 № 3 (93) Published
Authors
Lapshin Viktor , Turkin Ilya , Zakalyuzhny Aleksey
DOI
https://doi.org/10.30987/article_5c7434fd136d59.56723792
Published
15.03.2019
Science intensive technologies in mechanical engineering
IMPROVEMENT OF INTELLIGENT AUTOMATED CONTROL SYSTEM STRUCTURE BASED ON TECHNOLOGIES OF STRATEGIC, COMPETITIVE AND SITUATION CONTROL
Volume, issue
2019 № 5 (95) Published
Authors
Sukhanova Nataliya
DOI
https://doi.org/10.30987/article_5ca3030b230c44.56471806
Published
19.05.2019
Science intensive technologies in mechanical engineering
COMPETENCE FORMATION IN EXPERTS OF SCIENCE INTENSIVE TECHNOLOGIES OF PRE-PRODUCTION
Volume, issue
2019 № 6 (96) Published
Authors
Averchenkov Andrey , Koloshkina Inna , Sheptunov Sergey
DOI
https://doi.org/10.30987/article_5ce675a1c992a1.55020580
Published
20.06.2019
Science intensive technologies in mechanical engineering
PROGRAM BASIS FOR DESIGN OF “TO ORDER” TECHNOLOGICAL EQUIPMEN
Volume, issue
2019 № 6 (96) Published
Authors
Rybakov Anatoliy , Evdokimov Sergey , Krasnov Andrey , Sheptunov Sergey , Shurpo Alexandr
DOI
https://doi.org/10.30987/article_5ce675a2003727.56413536
Published
20.06.2019
Science intensive technologies in mechanical engineering
SYNERGETIC APPROACH TO MACHINING CONTROL OF LATHE GROUP MACHINES
Volume, issue
2019 № 11 (101) Published
Authors
Zakovorotny Vilor , Gvindzhiliya Valeriya
DOI
https://doi.org/10.30987/article_5d9dc9b8e6bdd8.19855459
Published
28.11.2019
Science intensive technologies in mechanical engineering
RETURN ON INVESTMENT (ROI) IN PROJECTS OF INTRODUCTION OF MANUFACTURING EXECUTIVE SYSTEMS (MES) AT RUSSIAN ENTERPRISES
Volume, issue
2020 № 3 (105) Published
Authors
Parshina Irina
DOI
https://doi.org/10.30987/2223-4608-2020-3-37-43
Published
22.03.2020
Science intensive technologies in mechanical engineering
PROBLEMS OF KINEMATIC AND NETWORK MODELING OF FLEXIBLE PRODUCTION CELL
Volume, issue
2020 № 3 (105) Published
Authors
Mamedov Dgavanshir , Abdullaev Gurban , Alieva A. , Aliev I.
DOI
https://doi.org/10.30987/2223-4608-2020-3-44-48
Published
22.03.2020
Science intensive technologies in mechanical engineering
CUTTING EFFECTIVENESS INCREASE AT EXPENSE OF ADAPTIVE CONTROL IN DIGITAL PRODUCTION SYSTEMS
Volume, issue
2020 № 4 (106) Published
Authors
Ingemansson Aleksandr
DOI
https://doi.org/10.30987/2223-4608-2020-4-39-48
Published
21.04.2020
Science intensive technologies in mechanical engineering
IMPROVEMENT OF HORIZONTAL BORER CONTROL SYSTEM
Volume, issue
2020 № 7 (109) Published
Authors
Petreshin Dmitriy , Khandozhko Viktor , Dubov Andrey , Dobrovolsky German
DOI
https://doi.org/10.30987/2223-4608-2020-7-41-48
Published
16.07.2020
Science intensive technologies in mechanical engineering
CURRENT STATE AND TRENDS IN DEVELOPMENT OF TECHNOLOGICAL ENGINEERING PRE-PRODUCTION
Volume, issue
2020 № 8 (110) Published
Authors
Tchigirinsky Uyliy
DOI
https://doi.org/10.30987/2223-4608-2020-8-29-35
Published
16.08.2020
Science intensive technologies in mechanical engineering
DIGITAL PRODUCTION SYSTEM FOR MACHINING PRODUCTION: STRUCTURE, OPERATION, SOFTWARE PRODUCTION-TECHNOLOGICAL COMPLEX AND ANALYSIS OF TECHNICAL AND ECONOMIC EFFECTIVENESS
Volume, issue
2020 № 11 (113) Published
Authors
Ingemansson Aleksandr
DOI
https://doi.org/10.30987/2223-4608-2020-11-30-39
Published
30.11.2020
Science intensive technologies in mechanical engineering
PRE-PRODUCTION EFFECTIVENESS INCREASE AT HIGH-SPEED HIGH-STRENGTH ALUMINUM PARTS MILLING
Volume, issue
2021 № 2 (116) Published
Authors
Nikolaev Andrey , Savilov Andrey
DOI
https://doi.org/10.30987/2223-4608-2021-2-36-40
Published
28.02.2021
Science intensive technologies in mechanical engineering
CURRENT ASPECTS IN AUTOMATION OF SCIENTIFIC RESEARCHES OF MACHINERY SURFACE QUALITY USING MACHINE LEARNING METHODS
Volume, issue
2021 № 7 (121) Published
Authors
Bezyazychnyy Vyacheslav , Palamar' Irina
DOI
https://doi.org/10.30987/2223-4608-2021-7-12-19
Published
30.07.2021
Science intensive technologies in mechanical engineering
MATHEMATICAL MODEL OF TECHNOLOGICAL MODE ON-LINE CONTROL AT BLADE PROCESSING
Volume, issue
2021 № 7 (121) Published
Authors
Tchigirinsky Uyliy , Ingemansson Aleksandr
DOI
https://doi.org/10.30987/2223-4608-2021-7-20-28
Published
30.07.2021
Science intensive technologies in mechanical engineering
SYSTEM APPROACH TO ORGANIZATION OF SPECIALIZED PRODUCTIONS IN MECHANICAL ENGINEERING
Volume, issue
2021 № 8 (122) Published
Authors
Bazrov Boris
DOI
https://doi.org/10.30987/2223-4608-2021-8-35-40
Published
01.09.2021
Science intensive technologies in mechanical engineering
EXPANSION OF INFORMATION SUPPORT FOR THE ASSESSMENT OF PRODUCTS MANUFACTURABILITY
Volume, issue
2021 № 9 (123) Published
Authors
Bochkarev Petr , Korolev Rihard , Bokova Larisa
DOI
https://doi.org/10.30987/2223-4608-2021-9-36-41
Published
04.10.2021
Science intensive technologies in mechanical engineering
MODULAR HARDWARE PLATFORM FOR THE DEVELOPMENT OF INDUSTRIAL INTERNET OF THINGS (IOT) DEVICES
Volume, issue
2021 № 12 (126) Published
Authors
Putrolaynen Vadim , Belyaev Maksim , Kirienko Dmitriy , Lun'kov Pavel
DOI
https://doi.org/10.30987/2223-4608-2021-12-20-25
Published
30.12.2021
Science intensive technologies in mechanical engineering
STATE AND OUTLOOKS IN DEVELOPMENT OF TECHNOLOGICAL COMPLEX OF ADDITIVE MANUFACTURING COMPOSITE PARTS
Volume, issue
2017 № 7 (73) Published
Authors
Vityaz Petr , Kheyfets Mikhail , Chizhik S.
DOI
https://doi.org/10.12737/article_595256f1e3d098.46148277
Published
20.07.2017
Science intensive technologies in mechanical engineering
DEVELOPMENT OF STRUCTURE AND FUNCTIONING MECHANISMS OF INFORMATION-EXECUTIVE CYBERPHYSICAL SYSTEMS IN MACHINING PRODUCTION
Volume, issue
2017 № 11 (77) Published
Authors
Ingemansson Aleksandr
DOI
https://doi.org/10.12737/article_59f074a7a5e088.16975906
Published
25.10.2017
Science intensive technologies in mechanical engineering
EXPERIENCE IN CAD SYSTEM INTRODUCTION OF ROLLING-MILL MACHINERY AT URALSMASHZAVOD
Volume, issue
2017 № 12 (78) Published
Authors
Polyakov Boris
DOI
https://doi.org/10.12737/article_5a313b6558b440.24460803
Published
13.12.2017
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?