Voronezh, Russian Federation
student
Russian Federation
employee from 01.01.2010 until now
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Zvolen, Slovakia
A composition for impregnation of birch and pine wood was developed. The impregnation of samples 20x20 mm in size and 10 mm in length along the wood fibers was realized by the “hot-cold bath” method at 120oC for 40 min. The efficiency of impregnating composition was evaluated according to physical parameters: water absorption, swelling in tangential and radial directions. It was found that impregnation of birch and pine wood with spent engine oil (SEO) allows improving the antiseptic properties and water resistance of wood and, hence, to decrease the water absorption and swelling of the wood of these species. To enhance the effect of hydrophobization of wood, inorganic (aerosol, clinoptilolite) and organic (oak bark flour) fillers (0.5; 1; 2%) were added to SEO. A non-linear dependence of the wood characteristics on the filler content in impregnating composition was observed. The addition of organic filler was more effective in improving the water resistance of wood as compared to inorganic ones. The impregnating composition with 1% of oak bark flour revealed the highest wood water absorption indicators, as a result, the present organic filler is the most promising in abatement of water absorption and swelling. The analysis of biostability of the samples allows us to ascertain that there is no biological damage in the impregnated wood. The present research illustrated that the use of SEO as a matrix for impregnation of birch and pine wood may partially solve the problem of its utilization, thereby creating the possibility of resource saving. The use of oak bark flour as a filler solves another problem – the obtaining of an effective and environmentally friendly impregnating composition.
wood, impregnation composition, water absorption, swelling, inorganic filler, oak bark flour
1. Ugolev B.N. Drevesinovedenie i lesnoe tovarovedenie. Uchebnik dlya lesotekhnicheskikh vusov. — 4-ie isd. — M.: GOU VPO MGUL, 2005. — 340 s.
2. Melnikova L.V. Tekhnologiya kompositsionnykh materialov iz drevesiny: Uchebnik dlya studentov spec. 2602.00. M.: MGUL, 1999.¬¬¬¬ ¬– 226 s.
3. Stepina I.V., Klyachenkova O.A. Biostability of Wood in the Presence of Boron-Nitrogen Compounds // XXIII R-S-P Seminar, Theoretical Foundation of Civil Engineering (23RSP) (TFoCE 2014)Volume 91, 2014, P. 358-361.
4. Storodubtseva T.N., Aksomitny A.A., Nikulin S.S., Gubin A.S. Zaschitnaya obrabotka drevesiny glioksalem // Le-sotekhnicheskii jurnal. 2017, № 2. P. 148-154.
5. Li W., Wang H., Ren D., Yu Yu., Yu Y. Wood modification with furfuryl alcohol catalysed by a new composite acidic catalyst // Wood Science and Technology, 2015. V. 49, № 4, pp. 845–856.
6. Dolmatov L.V., Akhmetov A.F., Karavan S.N. Patent № 2303522. Oil antiseptic for impregnation of wood – com-mercial conservation liquid. Published 27.07.2007, bul. №21.
7. Tribulova T., Kachik F., Evtugin D.V. IMPACTS OF INORGANIC CHEMICALS USED FOR WOOD PRO-TECTION: A REVIEW // ACTA FACULTATIS XYLOLOGIAE ZVOLEN, 2017. 59 (2) p. 5−22.
8. Szyłak-Szydłowsky M. Odour Nuisance of Railway Sleepers Saturated with Creosote Oil // CHEMICAL ENGI-NEERING TRANSACTIONS, 2016. VOL. 54, pp. 163-168. DOI: 10.3303/CET1654028
9. The interstate standard GOST 20022.6-93. Wood protection. The ways of impregnation. 1995 (valid).
10. The interstate standard GOST 16483.20-72. Wood. Determination method of water absorption. 1999 (valid).
11. The interstate standard GOST 16483.35-88. Wood. Method for determination of swelling. 1990 (valid).
12. The interstate standard GOST 20022.6-93. Wood protection. Classification. 1981 (valid).
