Tula, Tula, Russian Federation
Tula, Tula, Russian Federation
Hanoi, Vietnam
Designed special stamping equipment for the double-sided heading of axisymmetric parts with end bulges is shown, and also there are developed original designs of devices having parts mentioned.
axisymmetric parts with end bulges; stamping equipment; split semi-matrices; parts with collet sectors
1. GOST 16514-96. Volumetric Hydraulic Drives. Hydrau-lic Cylinders. General Technical Requirements. M.: “Standard Publishers” IPK, 2001. – pp. 5.
2. GOST 34252-2017 (ISO 15783:2002). Hermetic Centri-fugal Pumps. Technical Requirements. Class II. M.: “Standar-dinform” IPK, 2018. – pp. 49.
3. A.C. 564384 the RF. Pile Diesel Hammer // V.I. Telov, S.G. Fomenko, A.S. Odintsov: Obrastsov IERT. – application number: 2190421/33. – applied: 18.11.1975. – published: 05.07.1977. Bull. 25. – pp. 5.
4. Pat. RU 2164981. Diesel Hammer // K.A. Avdeev, M.V. Maliovanov; TulaSU; application number: 99126229/03. – applied: 15.12.1999. – published: 10.04.2001. – Bull. No.10. pp. 13.
5. Pat. RU 2393295. Free-piston Diesel-Hammer // E.N. Yeryomenko; E.N. Yeryomenko; application number: 2009111625/03. – applied: 30.03.2009. – published: 27.06.2010. – Bull. No.18. pp. 7.
6. Pat. RU 2517290. Hydraulic Hammer. // S.G. Fomenko, O.K. Adamova, A.A. Tarasov et al.; FBI “3 CRI DM RF”. Application number: 2012145050/03. – applied: 24.10.2012. – published: 27.05.2014. – Bull. No.15. pp. 10.
7. Pat. RU 2104148. Hydraulic Hammer (Versions) // La-vrentiev Institute of Hydrodynamics; application number: 95104636/28. – applied: 28.03.1995. – published: 10.02.1998. – Bull. 4. pp. 14.
8. Pat. RU 2333316. Hydraulic Hammer // P.A. Zakharov, A.G. Bogachenkov, V.M. Yermolaev; PC “ROPAT PLUS”. – Application number: 2006143500/03. – applied: 07.12.2006. – published: 10.09.2008. – Bull. No.25. pp. 5.
9. Pat. RU 2333317. Hydraulic Hammer // V.A. Kuvshi-nov, V.M. Yermolaev; PC “ROPAT PLUS”. – Application number. – 01.02.2006. – published: 10.09.2008. – Bull. No.25. pp. 7.
10. Pat. Ru 2149956. Pneumatic Device for Driving Long Parts, for Example, Pipes into Ground // H.M. Tkach, A.Ya. Tishkov, L.I. Gendlina et al.; Mining Institute of SB of the RAS. – applied: 24.03.1999. – published: 27.05.2000. – Bull. No.15. pp. 11.
11. Pat. RO 2440460. Air Percussion Machine for Driving Tools into Ground // P.N. Tambovtsev; Mining Institute SB of the RAS. – applied: 28.06.2010. – published: 20.01.2012. – Bull. No.2. pp.9.
12. Pat. RU 2276229. Air-percussion Machine for Driving Bars into Ground // P.N. Tambovtsev, A.Ya. Tishkov: Mining Institute SB of the RAS. – applied: 14.12.2004. – published: 10.05.2006. – Bull. No.13. pp. 7.
13. A.C. 548350 RF. Die for End Bulge Heading on Bar Billets // B.S. Tyshkovsky, V.S. Ferberova, G.V. et al. – appli-cation number: 2138997. – published: 28.02.1977. – Bull. No.8. pp. 7.
14. A.C. 1063519 RF. Method for Parts Punching // A.I. Oskolkov, M.I. Poksevatkin, A.S. Torhov et al. SPA “Al-tay RI of Technology and Mechanical Engineering”. – applied: 10.04.1982. – Published: 30.12.1983. – Bull. No.48. pp. 3.
15. Pat. RU 2010663. Pospelov’s Method for Heading Products of Bar with Head and Polygon Neck // A.L. Pospe-lov; A.L. Pospelov. – Application number: 4944968/27. – ap-plied: 14.06.1991. – published: 15.04.1994. – Bull. No.11. pp. 4.
16. Pat. RU 2016691. Method of Heading Parts with Right Slot of Head // N.I. Maximov; N.I. Maximov; application number: 5060523/27. – applied: 28.09.1992. – published: 30.97.1994. – Bull. No.22.pp.7.
17. Pat. RU 2053087. Device for Heading Bulges on Cylindrical Parts // D.V. Khvan, O.V. Soloviyov, E.V. Peshkov et al.; Voronezh Polytechnic Institute; application number 4945176/08. – applied. 13.06.1991. – published: 27.01.1996. – Bull. No.3. pp. 4.
18. Pat. RU 2056206. Die Forming of Bars with Flange // L.S. Temyanko, A.F. Mishin, Yu.P. Auchenkov et al.; PC “GAS”. – Application number: 94026832/08. – applied: 18. 07.1994. – published: 20.03.1996. – Bull. No.6. pp. 9.
19. Pat. RU 2092267. Method for Manufacturing Bar Fasteners with Head // V.Ya. Gerasimov, N.V. Paryshev, V.P. Egy; Company “KurganSteelbridge”; Application number: 96103406/02. – applied: 16.12.1996. – published: 10.10.1997. – Bull. No.28. pp. 3.
20. Pat. RU 2168386. Method for Heading Embedded Bolts with Head with Radial Extensions, Device for Preliminary Extension Shaping, Device for Final Extension Shaping // E.N. Khokhlov, A.D. Kartashov; E.N. Khokhlov, A.D. Kartashov; Application number: 99120925/02. – applied: 01.10.1999. – published: 10.06.2001. – Bull. No.16. pp. 13.
21. Pat. RU 2336143. Method for Manufacturing Bar Products with Head and Tapered Area of Bar // S.V. Adamchuk, V.L. Trachtenherz, V.I. Artyukhin et al.; PC “Magnitogorsk Hardware-Calibration Plant “MMK-METIZ”. – Application number: 20007120734/02. – applied: 05.06.2007. – published: 20.10.2000. – Bull. No.29. pp. 9.
22. Pat. RU 2419505. Manufacturing Forged Pieces of Rod with Flange Type // E.I. Semyonov, O.A. Belokurov, A.A. Gudov et al.; SEI HVT Moscow State Industrial Univer-sity; Application number 2009136535/02. – applied: 05.10.2009. – published: 27.05.2011. – Bull. No.15. pp. 8.
23. Pat. RU 2596511. Method for Manufacturing Parts of Rod with Bulge Type // V.V. Devyatov; V.V. Devyatov. – Application number: 2015119337/02. – applied: 22.05.2015. – published: 10.09.2016, Bull. No.25. pp. 3.
24. Pat. RU 2628596. Device for Die Forming Parts with Long Axle // Yu.P. Katrich, M.V. Gusev; FSAEI HE “MFTI (State University)”. Application number: 2016143419. – applied: 03.11.2016. – ppublished: 21.08.2017. – Bull. No.24. pp. 6.
25. A.C. 167130 RF. Device for Double-sided Heading Parts of Rod Type // G.P. Fuga, L.P. Ponomaryov, V.G. Vysotsky. – Application number: 817010/25-8. – applied: 28.01.1963. – published: 12.12.1964. – Bull. No.24. pp. 5.
26. A.C. 626871 RF. Die for Bulge Single-pass Heading on Rod Workpieces // B.V. Suvorov, A.G. Kapitonov; Co. m/b G-4086. – Application number: 2471191/25-27. – applied: 11.04.1977. – published: 05.10.1978. – Bull. No.37. pp. 5.
27. A.C. 640810 RF. Die for Heading Bulges on Rods // E.A. Kuzmin, B.K. Tikhomirov, L.V. Panfilyonok; DO of Technological Support “Micron”. – Application number: 2451964. – applied: 14.02.1977. – published: 05.01.1979. – Bull. No.1. pp. 5.
28. A.C. 774752 RF. Die for Double-sided Heading // Yu.S. Makazan, A.E. Odinets, F.A. Reznichenko; Zaporozhie P-K&TI MAP. – Application number: 2704899. – applied: 04.01.1979. – published: 30.10.1980. – Bull. No.40. pp. 6.
29. A.C. 774753 RF. Wedge Die for Double-sided Heading Rod Parts with Heads // A.I. Shevchenko, V.I. Podmogilny; Kramatorsk NI&PTI of Mechanical Engineering; Application number: 2720206/ 25-27. – applied: 29.01.1979. – published: 30.10.1980. – Bull. No.40. pp. 4.
30. A.C. 878403 RF. Device for Heading Bulges on Work-piece Ends of Rod Types // A.A. Rodionov, I.V. Ganzhov, N.A. Zhurin et al.; Application number: 2880141. – applied: 07.02.1980. – published: 07.11.1981. – Bull. No.41. pp.5.
31. A.C. 1224076 RF. Device for Double-sided Heading Bulges on Rod Workpieces // Yu.A. Kolobanov, A.L. Petrov, V.V. Tolmasov et al.; N-IK-TI of Tractor and Harvesting Ma-chine Engines. – Application number: 3601799. – applied: 07.04.1983. – published: 15.04.1986. – Bull. No.14. pp. 5.
32. Pat. RF 2148462. Device for Double-sided Electric Heading // L.S. Temyanko, A.F. Mishin, E.B. Krigman et al.; PC “GAS”. – Application number: 981192250/02. – applied: 21.10.1988. – published: 10.05.2000. – Bull. No.13. pp. 7.
33. A.C. 424638 RF. Method of Manufacturing Bushes with Double-sided Bulges // I.M. Zhvik, A.S. Sharov; Izhevsk Mechanical Institute. – Application number: 1891171. – ap-plied: 09.03.1973. – published: 25.04.1974. – Bull. No.12. pp. 4.
34. A.C. 893375 RF. Device for Bulge Heading on Pipe Ends // G.V. Rybin, P.D. Yugov, B.M. Avdeev et al.: Enter-prise m/b R-6837. – Application number: 2942048. – applied: 22.05. 1980. – published: 30.12.1981. – Bull. No.48. pp. 5.
35. A.C. 1183268 RF. Device for Pipe Billet Heading // V.E. Zyabrev, A.V. Kadashov, L.I. Smorodin; Enterprise m/b A-3813. Application number: 3783312. – applied: 21.06.1984. – published: 07.10.1985. – Bull. No.37. pp. 5.
36. Pat. RU 2686503. Method for Combined Pipe End Heading // N.M. Vedernikov, L.A. Pavlov, V.A. Propp; PC “KTIAM” Chelyabinsk. – Application number. – 2018117630. – applied: 11.05.2018. – published: 29.04.2019. – Bull. No.13. pp. 13.
37. Semyonov, A.D., Nikitkin, A.S. Model of diamond abrasive disk electro-erosion profiling // New Industrial Technologies. – 2009. – No.3. – pp. 16.
38. Foteev N.K. Tool electro-erosion dressing mode com-putation for metal bind diamond disks // Diamonds and Super-hard Materials. – 1977. – Issue 1. – pp. 58.
39. Pat. 2037394. Mounting Gun // Yu.G. Goncharenko, N.S. Puzikov; SML AP MSP “Electron”. – Application num-ber 504919/28. – applied: 15.05.1992. – published: 19.06. – Bull. No.17. pp. 4.
40. Pat. 2911104. Powder Mounting Gun // N.M. Pushkin, N.V. Upirov, E.M. Aksyonov; PC “Tula Weapons Factory”. – Application number 2000119845/28. – applied: 24.07.2000. – published: 20.10.2002. – Bull. No.29. pp. 4.
