Journals Conferences Monographies Textbooks Regulatorys Event GQW
Submit manuscript
Home / Journals / Science intensive technologies in mechanical engineering / Rubric SCIENCE INTENSIVE TECHNOLOGIES IN BLANK PRODUCTION (archived)

Articles of rubric " SCIENCE INTENSIVE TECHNOLOGIES IN BLANK PRODUCTION (ARCHIVED) " of journal " SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING "

COLD EXTRUSION OF CONICAL CUPS WITH CYLINDRICAL CAVITY
INNOVATIVE MANUFACTURING TECHNOLOGY OF BILLETS OF WIDE-CHORD BLADES OF GAS TURBINE ENGINES
MECHANIZED SYNERGIC WELDING WITH PULSED ELECTRODE WIRE FEED
EFFECT OF PULSE LASER BONDING CONDITIONS ON LAP WELD JOINT STRENGTH
METHOD OF SEAM FRICTION WELDING FOR COMPOSITION OF HIGH-TEMPERATURE NICKEL ALLOYS (BKHA-1BP WITH AP975-ID)
SCIENCE INTENSIVE TECHNOLOGIES IN SHAPING AT CURRENT STAGE OF MECHANICAL ENGINEERING DEVELOPMENT
SCIENCE INTENSIVE TECHNOLOGIES OF WELDING IN ALUMINUM ALLOY VEHICLE MANUFACTURING
REGULARITIES IN BIMETAL JOINT FORMATION AT EXPLOSION WELDING WITH SIMULTANEOUS PUNCHING
DEVELOPMENT OF COMPLICATED OSCILLATION ALGORITHM FOR CONTINUITY ASSURANCE AT ARC WELDING DEPOSITION
DRIVE CHOICE FOR PRODUCT CONTROLLED MECHANICAL OSCILLATIONS IN TECHNOLOGY OF ARC WELDING AND WELDING DEPOSITION WITH PULSE IMPACTS
INVESTIGATION OF DIMENSION ACCURACY FORMATION IN CASTING PATTERNS CARRIED OUT BY METHOD OF ADDITIVE TECHNOLOGIES FOR FOUNDRY
TECHNOLOGY IN WELDING OF WROUGHT ALUMINUM ALLOY 1151
INFLUENCE OF MATERIAL MELT KINEMATIC VISCOSITY UPON TREATMENT QUALITY AT FINE-JET PLASMA CUTTING OF BIMETALLIC COMPOSITIONS
OXIDE INCLUSIONS IN JOINTS OF ALUMINUM ALLOYS MADE BY METHOD OF FRICTION WELDING WITH MIXING
DESIGN OF INNOVATION TECHNOLOGIES IN METAL SHAPING
EXPERIMENTAL INVESTIGATION OF HIGH-TEMPERATURE 40H STEEL BLANK COOLING
HOT EXTRUSION OF INNER STAGES IN HOUSINGS
SCIENTIFICALLY SUBSTANTIATED UPDATING OF ARC MECHANICAL WELDING AND SURFACIN
QUALITY CONTROL OF BLANKS MANUFACTURED BY METAL FORMING
ENGINEERING PROCEDURE IN ELECTRON-BEAM WELDING OF BLADE PACKET FOR STEAM TURBINES
SCIENCE INTENSIVE TECHNOLOGIES IN MANUFACTURING CAST STOPS UNIFIED WITH STRUCTURE OF FREIGHT CAR CENTER SILL WITH AXIAL LOAD 27TP
STRESS-STRAIN PROPERTIES OF WELDED JOINTS IN ALUMINUM ALLOY AD0 PLATES CARRIED OUT BY FUSE AND FRICTION STIR WELDING
SERIAL-ALIGNED BLANK DRAWING AT VISCO-PLASTIC DEFORMATION
CHARACTERISTICS CHOICE OF STEEL GRADE 08 FOR SHEET STAMPING
TECHNOLOGICAL PECULIARITIES OF FRICTION WELDING WITH AL-MG ALUMINUM ALLOYS STIR
MODEL OF FORMING OPEN-ENDED RINGS MADE OF ELASTIC RODS
SCIENTIFICALLY SUBSTANTIATED TECHNOLOGY FOR REVERSE EXTRUSION OF PRODUCTS MADE OF ANISOTROPIC TUBULAR BILLETS
THERMO-CYCLING IMPACT UPON VELOCITY CHOICE OF TITANIUM ALLOY SUPER-PLASTIC FLOW
SURFACE FORMATION OF FORGED STRAIGHT TOOTH OF BEVEL GEAR TAKING INTO ACCOUNT STOCK FOR FINISHING
ANALYSIS OF SURFACE ROUGHNESS PARAMETERS IN BILLETS OBTAINED BY METHOD OF ADDITIVE TECHNOLOGIES
TECHNOLOGICAL QUALITY SUPPORT OF WELD SEAM OBTAINED BY FRICTION STIR METHOD
ANALYSIS OF WELDING KIND IMPACT UPON PHASE STRUCTURE AND INNER STRESSES OF AUSTENITIC AND DUPLEX STEEL WELDED JOINTS
GAS MOLDING OF STRUCTURE PARTS AT NON-LINEAR DUCTILE DEFORMATION OF ANISOTROPIC MATERIALS
REVERSE EXTRUSION OF BAR STOCK WITH ACTIVE FRICTION AND END SWELL STRETCHING
PLASMA WELDING OF HIGH-STRENGTH ALUMINUM ALLOYS
TECHNOLOGICAL FAILURES IN SHEET STAMPING
PECULIARITIES OF AD33 ALUMINUM ALLOY HAND LASER WELDING
ANALYSIS OF PRODUCT GEOMETRY FORMATION AT SQUARE BILLET STRETCHING ON PROFILE MATRIX
DESIGN OF STAMPING EQUIPMENT FOR MANUFACTURING AXISYMMETRIC PARTS WITH END BULGES AND THEIR USE
VARIATION ASSESSMENT OF YIELD MODE AT PRESSURE WELDING
SUBSEQUENT DRAWING OF ANISOTROPIC VISCOUS-PLASTIC MATERIAL
GAS-DYNAMIC ASPECTS OF NEW METAL-CUTTING PLASMATRON DESIGN
CURRENT TRENDS AND OUTLOOKS IN DEVELOPMENT OF METAL FORMING TECHNOLOGIES IN MECHANICAL ENGINEERING
DETERMINATION OF RATIONAL MODES OF SOFTENING HEAT TREATMENT OF FLANGES MADE OF MEDIUM-CARBON STEELS
OPTIMIZATION OF THE TECHNOLOGY OF CUTTING HEAVY-GAGE SHEET METAL BY THERMAL METHOD
THE MECHANISM OF EDGE CUTTING MACHINING OF ROLLED IRON FROM OXIDE SCALE
A NORMALIZED METHOD FOR DETERMINING THE INFLUENCE ON THE FIXED JOINTS TIGHTNESS USING THE TECHNOLOGY OF THE SEALING SURFACE JOB
PRODUCTS STRESS DURING BREAKING-DOWN WITH THINNING-OUT OF THE PIPE STOCK ELEMENT
HOT BREAKING-DOWN OF LARGE-SIZED PIPE STOCKS
ON THE CHOICE OF CRITERIA FOR THE EFFECTIVENESS OF GAS-VORTEX STABILIZATION OF PLASMA TORCHES
TECHNOLOGICAL MODES OF ANISOTROPIC RELAXING MATERIAL DRAWING
GAS MOLDING OF TOROIDAL TANK SHELLS
ULTRASOUND APPLICATION WHEN EXPLOSION WELDING
AIR-PETROL BURNERS USE FOR SOLID STONE MINING AND PROCESSING
Science intensive technologies in mechanical engineering
COLD EXTRUSION OF CONICAL CUPS WITH CYLINDRICAL CAVITY
Volume, issue
1 № 1 Published
Authors
Korobova N. , Dmitriev A. , Tolmachev N.
DOI
https://doi.org/10.12737/17316
Published
31.01.2016
Science intensive technologies in mechanical engineering
INNOVATIVE MANUFACTURING TECHNOLOGY OF BILLETS OF WIDE-CHORD BLADES OF GAS TURBINE ENGINES
Volume, issue
1 № 2 Published
Authors
Bystrov V , Andreev V , Matveev A , Kazakov R
DOI
https://doi.org/10.12737/17797
Published
28.02.2016
Science intensive technologies in mechanical engineering
MECHANIZED SYNERGIC WELDING WITH PULSED ELECTRODE WIRE FEED
Volume, issue
1 № 2 Published
Authors
Lebedev V
DOI
https://doi.org/10.12737/17802
Published
28.02.2016
Science intensive technologies in mechanical engineering
EFFECT OF PULSE LASER BONDING CONDITIONS ON LAP WELD JOINT STRENGTH
Volume, issue
1 № 3 Published
Authors
Perestoronin A. , Buketkin B. , Bogdanov A. , Adamini F.
DOI
https://doi.org/10.12737/18077
Published
31.03.2016
Science intensive technologies in mechanical engineering
METHOD OF SEAM FRICTION WELDING FOR COMPOSITION OF HIGH-TEMPERATURE NICKEL ALLOYS (BKHA-1BP WITH AP975-ID)
Volume, issue
1 № 3 Published
Authors
Supov A. , Dautov S. , Kovalchuk V. , Ospennikova O , Lukin V. , Samorukov M.
DOI
https://doi.org/10.12737/18078
Published
31.03.2016
Science intensive technologies in mechanical engineering
SCIENCE INTENSIVE TECHNOLOGIES IN SHAPING AT CURRENT STAGE OF MECHANICAL ENGINEERING DEVELOPMENT
Volume, issue
1 № 4 Published
Authors
Demin Viktor
DOI
https://doi.org/10.12737/18096
Published
30.04.2016
Science intensive technologies in mechanical engineering
SCIENCE INTENSIVE TECHNOLOGIES OF WELDING IN ALUMINUM ALLOY VEHICLE MANUFACTURING
Volume, issue
1 № 5 Published
Authors
Ovchinnikov V.
DOI
https://doi.org/10.12737/18708
Published
30.04.2016
Science intensive technologies in mechanical engineering
REGULARITIES IN BIMETAL JOINT FORMATION AT EXPLOSION WELDING WITH SIMULTANEOUS PUNCHING
Volume, issue
1 № 8 Published
Authors
Lysak Vladimir , Kuzmin Vladimir , Ivanenko Egor
DOI
https://doi.org/10.12737/20800
Published
30.08.2016
Science intensive technologies in mechanical engineering
DEVELOPMENT OF COMPLICATED OSCILLATION ALGORITHM FOR CONTINUITY ASSURANCE AT ARC WELDING DEPOSITION
Volume, issue
1 № 8 Published
Authors
Lebedev Vladimir Aleksandrovich , Novikov Sergey
DOI
https://doi.org/10.12737/20807
Published
30.08.2016
Science intensive technologies in mechanical engineering
DRIVE CHOICE FOR PRODUCT CONTROLLED MECHANICAL OSCILLATIONS IN TECHNOLOGY OF ARC WELDING AND WELDING DEPOSITION WITH PULSE IMPACTS
Volume, issue
2016 № 11 (65) Published
Authors
Chikal Andrey , Isakov Andrey , Kozyrko Oleg , Lebedev Vladimir Aleksandrovich , Dragan Stanislav , Gal Anatoliy
DOI
https://doi.org/10.12737/22573
Published
14.11.2016
Science intensive technologies in mechanical engineering
INVESTIGATION OF DIMENSION ACCURACY FORMATION IN CASTING PATTERNS CARRIED OUT BY METHOD OF ADDITIVE TECHNOLOGIES FOR FOUNDRY
Volume, issue
2016 № 12 (66) Published
Authors
Butsanets Artem , Olkhovik Evgeniy , Ageeva Aleksandra
DOI
https://doi.org/10.12737/23468
Published
30.12.2016
Science intensive technologies in mechanical engineering
TECHNOLOGY IN WELDING OF WROUGHT ALUMINUM ALLOY 1151
Volume, issue
2017 № 1 (67) Published
Authors
Kurbatova Irina , Drits Aleksandr , Ovchinnikov Viktor , Guryeyeva Marina
DOI
https://doi.org/10.12737/24206
Published
31.01.2017
Science intensive technologies in mechanical engineering
INFLUENCE OF MATERIAL MELT KINEMATIC VISCOSITY UPON TREATMENT QUALITY AT FINE-JET PLASMA CUTTING OF BIMETALLIC COMPOSITIONS
Volume, issue
2017 № 5 (71) Published
Authors
Rakhimyanov Kharis , Rakhimyanov Andrey
DOI
https://doi.org/10.12737/article_591947e1367747.15873002
Published
15.05.2017
Science intensive technologies in mechanical engineering
OXIDE INCLUSIONS IN JOINTS OF ALUMINUM ALLOYS MADE BY METHOD OF FRICTION WELDING WITH MIXING
Volume, issue
2017 № 6 (72) Published
Authors
Ovchinnikov Viktor , Andreeva L , Lyubimova Tatyana
DOI
https://doi.org/10.12737/article_5928313a0cf047.54579014
Published
01.06.2017
Science intensive technologies in mechanical engineering
DESIGN OF INNOVATION TECHNOLOGIES IN METAL SHAPING
Volume, issue
2017 № 8 (74) Published
Authors
Demin Virtor
DOI
https://doi.org/10.12737/article_5971e72d9cb153.82722176
Published
24.07.2017
Science intensive technologies in mechanical engineering
EXPERIMENTAL INVESTIGATION OF HIGH-TEMPERATURE 40H STEEL BLANK COOLING
Volume, issue
2017 № 12 (78) Published
Authors
Makarov S. , Chekmyshev K.
DOI
https://doi.org/10.12737/article_5a313b637d37c8.44867396
Published
13.12.2017
Science intensive technologies in mechanical engineering
HOT EXTRUSION OF INNER STAGES IN HOUSINGS
Volume, issue
2018 № 1 (79) Published
Authors
Chudin Vladimir
DOI
https://doi.org/10.12737/article_5a5a44e7af0b11.86223240
Published
14.01.2018
Science intensive technologies in mechanical engineering
SCIENTIFICALLY SUBSTANTIATED UPDATING OF ARC MECHANICAL WELDING AND SURFACIN
Volume, issue
2018 № 1 (79) Published
Authors
Lebedev Vladimir Aleksandrovich , Zhuk Gtnadyi , Novikov Sergey
DOI
https://doi.org/10.12737/article_5a5a44e7e76648.65231570
Published
14.01.2018
Science intensive technologies in mechanical engineering
QUALITY CONTROL OF BLANKS MANUFACTURED BY METAL FORMING
Volume, issue
2018 № 3 (81) Published
Authors
Demin Virtor
DOI
https://doi.org/10.12737/article_5a8ef9cb057f82.61176738
Published
22.02.2018
Science intensive technologies in mechanical engineering
ENGINEERING PROCEDURE IN ELECTRON-BEAM WELDING OF BLADE PACKET FOR STEAM TURBINES
Volume, issue
2018 № 3 (81) Published
Authors
Kheifets M. , Borodavko V. , Pynkin A. , Gretsky Nikolai
DOI
https://doi.org/10.12737/article_5a8ef9cb7d0fc9.83528290
Published
22.02.2018
Science intensive technologies in mechanical engineering
SCIENCE INTENSIVE TECHNOLOGIES IN MANUFACTURING CAST STOPS UNIFIED WITH STRUCTURE OF FREIGHT CAR CENTER SILL WITH AXIAL LOAD 27TP
Volume, issue
2018 № 6 (84) Published
Authors
Savushkin Roman , Kyakk Kiril , Broitman Oleg , Kononenko Alexandr , Terentiev Maxim , Borodin Stepan
DOI
https://doi.org/10.30987/article_5b0e4111d99220.56483869
Published
22.06.2018
Science intensive technologies in mechanical engineering
STRESS-STRAIN PROPERTIES OF WELDED JOINTS IN ALUMINUM ALLOY AD0 PLATES CARRIED OUT BY FUSE AND FRICTION STIR WELDING
Volume, issue
2018 № 8 (86) Published
Authors
Ovchinnikov Viktor , Drits Aleksandr , Bakshaev Valeriy
DOI
https://doi.org/10.30987/article_5b536401176008.32263974
Published
06.09.2018
Science intensive technologies in mechanical engineering
SERIAL-ALIGNED BLANK DRAWING AT VISCO-PLASTIC DEFORMATION
Volume, issue
2019 № 1 (91) Published
Authors
Chernyaev Aleksey , Chudin Vladimir , Tesakov Dmitry
DOI
https://doi.org/10.30987/article_5c129147c32b90.29812449
Published
18.01.2019
Science intensive technologies in mechanical engineering
CHARACTERISTICS CHOICE OF STEEL GRADE 08 FOR SHEET STAMPING
Volume, issue
2019 № 3 (93) Published
Authors
Demin Virtor
DOI
https://doi.org/10.30987/article_5c7434e7e58fd6.35786465
Published
15.03.2019
Science intensive technologies in mechanical engineering
TECHNOLOGICAL PECULIARITIES OF FRICTION WELDING WITH AL-MG ALUMINUM ALLOYS STIR
Volume, issue
2019 № 3 (93) Published
Authors
Ovchinnikov Viktor , Drits Aleksandr
DOI
https://doi.org/10.30987/article_5c7434ed5317f2.05345899
Published
15.03.2019
Science intensive technologies in mechanical engineering
MODEL OF FORMING OPEN-ENDED RINGS MADE OF ELASTIC RODS
Volume, issue
2019 № 9 (99) Published
Authors
Korolev Albert , Turenko Alexandr
DOI
https://doi.org/10.30987/article_5d2df087f1b850.47783687
Published
26.09.2019
Science intensive technologies in mechanical engineering
SCIENTIFICALLY SUBSTANTIATED TECHNOLOGY FOR REVERSE EXTRUSION OF PRODUCTS MADE OF ANISOTROPIC TUBULAR BILLETS
Volume, issue
2019 № 10 (100) Published
Authors
Larin Sergey , Bulychyov V.
DOI
https://doi.org/10.30987/article_5d6518cd53cfc8.73541778
Published
29.10.2019
Science intensive technologies in mechanical engineering
THERMO-CYCLING IMPACT UPON VELOCITY CHOICE OF TITANIUM ALLOY SUPER-PLASTIC FLOW
Volume, issue
2019 № 10 (100) Published
Authors
Gadalov Vladimir , Vornacheva Irina , Filonovich Alexander , Chernyshev Aleksandr
DOI
https://doi.org/10.30987/article_5d6518cd691f02.33724732
Published
29.10.2019
Science intensive technologies in mechanical engineering
SURFACE FORMATION OF FORGED STRAIGHT TOOTH OF BEVEL GEAR TAKING INTO ACCOUNT STOCK FOR FINISHING
Volume, issue
2019 № 10 (100) Published
Authors
Medvedev Vladimir , Volkov Andrey , Biryukov Sergey
DOI
https://doi.org/10.30987/article_5d6518cd7e4976.28892134
Published
29.10.2019
Science intensive technologies in mechanical engineering
ANALYSIS OF SURFACE ROUGHNESS PARAMETERS IN BILLETS OBTAINED BY METHOD OF ADDITIVE TECHNOLOGIES
Volume, issue
2019 № 12 (102) Published
Authors
Bezyazychnyy Vyacheslav , Fedoseev Denis
DOI
https://doi.org/10.30987/2223-4608-2019-2019-12-3-11
Published
16.12.2019
Science intensive technologies in mechanical engineering
TECHNOLOGICAL QUALITY SUPPORT OF WELD SEAM OBTAINED BY FRICTION STIR METHOD
Volume, issue
2019 № 12 (102) Published
Authors
Ovchinnikov Viktor , Opalnitskiy Artem , Drits Aleksandr
DOI
https://doi.org/10.30987/2223-4608-2019-2019-12-11-21
Published
16.12.2019
Science intensive technologies in mechanical engineering
ANALYSIS OF WELDING KIND IMPACT UPON PHASE STRUCTURE AND INNER STRESSES OF AUSTENITIC AND DUPLEX STEEL WELDED JOINTS
Volume, issue
2020 № 3 (105) Published
Authors
Kuryntsev Sergey
DOI
https://doi.org/10.30987/2223-4608-2020-3-3-11
Published
22.03.2020
Science intensive technologies in mechanical engineering
GAS MOLDING OF STRUCTURE PARTS AT NON-LINEAR DUCTILE DEFORMATION OF ANISOTROPIC MATERIALS
Volume, issue
2020 № 4 (106) Published
Authors
Chudin Vladimir , Larin Sergey
DOI
https://doi.org/10.30987/2223-4608-2020-4-18-21
Published
21.04.2020
Science intensive technologies in mechanical engineering
REVERSE EXTRUSION OF BAR STOCK WITH ACTIVE FRICTION AND END SWELL STRETCHING
Volume, issue
2020 № 6 (108) Published
Authors
Larin Sergey , Pasynkov Andrey , Nuzhdin Georgiy
DOI
https://doi.org/10.30987/2223-4608-2020-6-16-20
Published
14.06.2020
Science intensive technologies in mechanical engineering
PLASMA WELDING OF HIGH-STRENGTH ALUMINUM ALLOYS
Volume, issue
2020 № 7 (109) Published
Authors
Ovchinnikov Viktor , Rastopchin Ruslan
DOI
https://doi.org/10.30987/2223-4608-2020-7-3-11
Published
16.07.2020
Science intensive technologies in mechanical engineering
TECHNOLOGICAL FAILURES IN SHEET STAMPING
Volume, issue
2020 № 8 (110) Published
Authors
Demin Virtor
DOI
https://doi.org/10.30987/2223-4608-2020-8-23-28
Published
16.08.2020
Science intensive technologies in mechanical engineering
PECULIARITIES OF AD33 ALUMINUM ALLOY HAND LASER WELDING
Volume, issue
2020 № 12 (114) Published
Authors
Proskuryakov Nikolay , Putilova Uliana , Mamadaliev Rasul , Teploukhov Oleg
DOI
https://doi.org/10.30987/2223-4608-2020-12-13-17
Published
31.12.2020
Science intensive technologies in mechanical engineering
ANALYSIS OF PRODUCT GEOMETRY FORMATION AT SQUARE BILLET STRETCHING ON PROFILE MATRIX
Volume, issue
2021 № 3 (117) Published
Authors
Larin Sergey , Samsonov Nikita , Platonov Valeriy
DOI
https://doi.org/10.30987/2223-4608-2021-3-3-6
Published
20.03.2021
Science intensive technologies in mechanical engineering
DESIGN OF STAMPING EQUIPMENT FOR MANUFACTURING AXISYMMETRIC PARTS WITH END BULGES AND THEIR USE
Volume, issue
2021 № 3 (117) Published
Authors
Panfilov Gennadiy , Do An , Le Min
DOI
https://doi.org/10.30987/2223-4608-2021-3-7-15
Published
20.03.2021
Science intensive technologies in mechanical engineering
VARIATION ASSESSMENT OF YIELD MODE AT PRESSURE WELDING
Volume, issue
2021 № 3 (117) Published
Authors
Chudin Vladimir , Platonov Valeriy , Romanov Pavel
DOI
https://doi.org/10.30987/2223-4608-2021-3-16-18
Published
20.03.2021
Science intensive technologies in mechanical engineering
SUBSEQUENT DRAWING OF ANISOTROPIC VISCOUS-PLASTIC MATERIAL
Volume, issue
2021 № 5 (119) Published
Authors
Chernyaev Aleksey , Tesakov Dmitry
DOI
https://doi.org/10.30987/2223-4608-2021-5-3-6
Published
30.05.2021
Science intensive technologies in mechanical engineering
GAS-DYNAMIC ASPECTS OF NEW METAL-CUTTING PLASMATRON DESIGN
Volume, issue
2021 № 5 (119) Published
Authors
Anakhov Sergey , Matushkin Anatoliy , Pykin Yuriy
DOI
https://doi.org/10.30987/2223-4608-2021-5-7-13
Published
30.05.2021
Science intensive technologies in mechanical engineering
CURRENT TRENDS AND OUTLOOKS IN DEVELOPMENT OF METAL FORMING TECHNOLOGIES IN MECHANICAL ENGINEERING
Volume, issue
2021 № 8 (122) Published
Authors
Demin Virtor , Larin Sergey
DOI
https://doi.org/10.30987/2223-4608-2021-8-3-11
Published
01.09.2021
Science intensive technologies in mechanical engineering
DETERMINATION OF RATIONAL MODES OF SOFTENING HEAT TREATMENT OF FLANGES MADE OF MEDIUM-CARBON STEELS
Volume, issue
2021 № 10 (124) Published
Authors
Burgonova Oksana , Pantyukhova Ksenia , Badamshin Artem , Rogachev Evgeniy
DOI
https://doi.org/10.30987/2223-4608-2021-10-3-10
Published
29.10.2021
Science intensive technologies in mechanical engineering
OPTIMIZATION OF THE TECHNOLOGY OF CUTTING HEAVY-GAGE SHEET METAL BY THERMAL METHOD
Volume, issue
2021 № 11 (125) Published
Authors
Anakhov Sergey , Matushkin Anatoliy , Gogolev Alexandr
DOI
https://doi.org/10.30987/2223-4608-2021-11-3-11
Published
30.11.2021
Science intensive technologies in mechanical engineering
THE MECHANISM OF EDGE CUTTING MACHINING OF ROLLED IRON FROM OXIDE SCALE
Volume, issue
2021 № 11 (125) Published
Authors
Korolev Albert , Panfilova Anastasia , Iznairov Boris , Reshetnikova Olga , Pavlova Viktorya
DOI
https://doi.org/10.30987/2223-4608-2021-11-12-19
Published
30.11.2021
Science intensive technologies in mechanical engineering
A NORMALIZED METHOD FOR DETERMINING THE INFLUENCE ON THE FIXED JOINTS TIGHTNESS USING THE TECHNOLOGY OF THE SEALING SURFACE JOB
Volume, issue
2021 № 11 (125) Published
Authors
Ovchinnikov Viktor , Berezina Viktorya , Skakova Tat'yana
DOI
https://doi.org/10.30987/2223-4608-2021-11-20-29
Published
30.11.2021
Science intensive technologies in mechanical engineering
PRODUCTS STRESS DURING BREAKING-DOWN WITH THINNING-OUT OF THE PIPE STOCK ELEMENT
Volume, issue
2021 № 12 (126) Published
Authors
Larin Sergey , Larina Marina
DOI
https://doi.org/10.30987/2223-4608-2021-12-3-6
Published
30.12.2021
Science intensive technologies in mechanical engineering
HOT BREAKING-DOWN OF LARGE-SIZED PIPE STOCKS
Volume, issue
2021 № 12 (126) Published
Authors
Pasynkov Andrey , Yakovlev Boris
DOI
https://doi.org/10.30987/2223-4608-2021-12-7-11
Published
30.12.2021
Science intensive technologies in mechanical engineering
ON THE CHOICE OF CRITERIA FOR THE EFFECTIVENESS OF GAS-VORTEX STABILIZATION OF PLASMA TORCHES
Volume, issue
2022 № 1 (127) Published
Authors
Anakhov Sergey , Matushkin Anatoliy , Pykin Yuriy
DOI
https://doi.org/10.30987/2223-4608-2022-1-11-20
Published
28.01.2022
Science intensive technologies in mechanical engineering
TECHNOLOGICAL MODES OF ANISOTROPIC RELAXING MATERIAL DRAWING
Volume, issue
2022 № 2 (128) Published
Authors
Platonov Valeriy , Pasynkov Andrey , Chudin Vladimir
DOI
https://doi.org/10.30987/2223-4608-2022-2-22-25
Published
28.02.2022
Science intensive technologies in mechanical engineering
GAS MOLDING OF TOROIDAL TANK SHELLS
Volume, issue
2022 № 3 (129) Published
Authors
Chudin Vladimir
DOI
https://doi.org/10.30987/2223-4608-2022-3-10-13
Published
30.03.2022
Science intensive technologies in mechanical engineering
ULTRASOUND APPLICATION WHEN EXPLOSION WELDING
Volume, issue
2017 № 7 (73) Published
Authors
Kuzmin Sergey , Lysak Vladimir , Kuzmin Evgeny
DOI
https://doi.org/10.12737/article_595256f165bf11.96830007
Published
20.07.2017
Science intensive technologies in mechanical engineering
AIR-PETROL BURNERS USE FOR SOLID STONE MINING AND PROCESSING
Volume, issue
2017 № 12 (78) Published
Authors
Povetkin Vitaliy , Bukaeva Amina , Khandozhko Alexandr
DOI
https://doi.org/10.12737/article_5a313b63b01a13.12923103
Published
13.12.2017
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?