Moskva, Moscow, Russian Federation
Moscow, Moscow, Russian Federation
Moskva, Moscow, Russian Federation
On the basis of metallographic analysis and test results of samples of welded junctions of aluminum alloys AMg6 and D16T, made by friction stir welding, for static stretching, it is shown that destruction occurs in the zone of thermo-mechanical action for the AMg6 alloy and in the zone of thermal influence for the D16T alloy. At the same time, the dependence of the temporary resistance value of the welded junction on the state of the seam weld face has not been revealed. Tests for low-cycle fatigue have shown that the endurance limit is clearly dependent on the amount of seam weld face roughness. The value of the roughness of the seam weld face for the studied alloys has been determined, in which the nature of the fracture during the low-cycle fatigue test changes from multi-stage to single-stage.
friction stir welding, aluminum alloys, seam weld face, roughness, temporary resistance, microstructure of the junction, endurance limit of the welded seam
1. Srinivasa Rao, T., Madhusudhan Reddy, G., Koteswara Rao, S.R. Microstructure and mechanical properties of friction stir welded AA7075-T651 aluminum alloy thick plates // Transactions of Nonferrous Metals Society of China, 2015, Vol. 25, no.4, P. 1170-1178.
2. Ovchinnikov, V.V. Hi-tech welding technologies in the production of transport objects made of aluminum alloys // Science intensive technologies in mechanical engineering, 2016, no.5 (59), pp. 3-9.
3. Drits, A.M., Ovchinnikov, V.V. Welding of aluminum alloys: monograph, M.: Publishing House "Ore and metals", 2017, 440 p.
4. Ishchenko, A.Ya., Podelnikov, S.V., Poklyatsky, A.G. Friction stir welding with mixing of aluminum alloys (review) // Automatic welding, 2007, no.11 (655), pp. 32-38.
5. Lakhtin, Yu.M. Metallology and heat treatment of met-als. Textbook for metallurgical specialties, 3-rd ed., Moscow: Mashinostroenie, 1983, 359 p.
6. Recrystallization and related annealing phenomena / F.J. Humphreys, G.S. Rohrer, A. Rollet, et al., 2-nd edition, El-sevier Ltd., 2004, 658 p.
7. Mishra, R.S., De, P.S., Kumar, N. Friction stir welding and Processing, Springer International Publishing Switzerland, 2014, 338 p.
8. Ovchinnikov, V.V., Drits, A.M., Solovyova, I.V. Influ-ence of parameters of the friction-mixing welding mode on the properties and structure of joints of alloy sheets 1151T // Procurement production in mechanical engineering, 2021, Vol. 19, no. 1, pp. 11-18.
