Journals Conferences Monographies Textbooks Regulatorys Event GQW
Submit manuscript
Home / Journals / Science intensive technologies in mechanical engineering / Rubric SCIENCE INTENSIVE MATERIALS PROCESSING AND NANOTECHNOLOGIES (archived)

Articles of rubric " SCIENCE INTENSIVE MATERIALS PROCESSING AND NANOTECHNOLOGIES (ARCHIVED) " of journal " SCIENCE INTENSIVE TECHNOLOGIES IN MECHANICAL ENGINEERING "

CALCULATION OF FUNCTIONAL NANOSTRUCTURES OF COATINGS, BASED ON MODELING OF THEIR SYNTHESIS
ANALYSIS OF DEFINITION AND PRINCIPLES OF COMPOSITE MATERIALS DEVELOPMENT
BASIC TYPES OF MODERN MODIFIERS FOR CAST IRON AND STEEL
HIGH TECHNOLOGIES IN INDUCTION MELTING IN INDUCTOR AND ELECTRO-MAGNETIC CRUCIBLE FURNACES
ADDITIVE SYNERGIC TECHNIQUES OF LAYERED SYNTHESIS OF COMPOSITE PRODUCTS AT POWER FLOW INFLUENCE
THEORETICAL INVESTIGATION OF HIGH-SPEED HEATING PROCESS IN SURFACE LAYER OF GREY IRON
QUALITY INCREASE IN SURFACE LAYER OF WORKING CYLINDER FACE OF RECIPROCATING INTERNAL COMBUSTION ENGINES (ICE)
CORROSION REASONS IN OIL-WELL TUBING OF OIL FIELDS AND THEIR LIFE TECHNOLOGICAL SUPPORT
NANOTECHNOLOGIES IN MECHANICAL ENGINEERING
STRUCTURE FORMATION IN SURFACE LAYER OF MACHINE PARTS BY METHODS OF HIGH-VACUUM ANNEALING AND ION IMPLANTATION
TECHNOLOGICAL FUNDAMENTALS OF NANO-STRUCTURED COMPOSITE SYNTHESIS BASED ON ALUMINUM ALLOYS
STRUCTURAL PECULIARITIES IN FIBROUS COMPOSITE WITH METAL MATRIX MANUFACTURED USING VARIOUS SHEET HALF-FINISHED PRODUCTS
HIGH TECHNOLOGY TO REDUCE HYDROGEN WEAR OF WORK SURFACES OF FRICTION
STRUCTURE SIMULATION OF FIBER-COMPOSITE MATERIAL MADE WITH USE OF DIFFERENT TYPES OF SHEET SEMI-PRODUCTS
ON MELT MOTION IN INDUCTION CRUCIBLE FURNACE
NUMERICAL SIMULATION OF HEAT EXCHANGE AT COOLING OF HIGH-TEMPERATURE METAL BLANK MADE OF STEEL CHGSN2A
COMPOSITE STRENGTH TECHNOLOGICAL INCREASE IN SHF ELECTROMAGNETIC FIELD
PIPE HIGH-TEMPERATURE STRENGTH RESEARCH OF PYROLYSIS FURNACE
IRRADIATION CONDITION IMPACT UPON NANO-PARTICLE PARAMETERS OBTAINED THROUGH METHOD OF LASER ABLATION IN LIQUID
CALCULATED MODEL OF SLEEVE BEARING LUBRICATED WITH MELT IN TURBULENT CONDITIONS OF FRICTION
METHOD FOR NANO-POWDER DISPERSION DEGREE DEFINITION
PREPARATORY STAGE EFFECTIVENESS INCREASE IN MANUFACTURING MACHINERY OF DISPERSED-STRENGTHENING POLYMERIC COMPOSITES
GLOW DISCHARGE IMPACT UPON CHANGES IN NI3FE DISLOCATION STRUCTURE
SCIENCE INTENSIVE TECHNOLOGY FOR MANUFACTURING COMPOSITE POWDERS IN MAGNETIC VIBRATING LAYER
AL-ALN NANO-STRUCTURAL ALUMINUM-MATRIX COMPOSITE MANUFACTURING BY POWDER METALLURGY METHOD
PROPERTY PECULIARITIES OF CU NANO-PARTICLES OBTAINED BY METHOD OF LASER ABLATION IN DIFFERENT LIQUIDS
SELF-ORGANIZATION AND CONTROL OF STRUCTURAL-PHASE TRANSFORMATIONS OF MATERIALS FOR ENGINEERING PRODUCT QUALITY ASSURANCE
IMPACT OF THERMAL TREATMENT MODES UPON STEEL 09G2S DURABILITY IN ENVIRONMENT WITH INCREASED CO2 VALUES
INNER STRESS ANALYSIS THROUGH METHODS OF X-RAY DIFFRACTOMETRY IN DEPOSITED METAL AND IN PERIWELD AREA BY ALLOY RARE-EARTH ELEMENTS
IMPACT OF THERMAL TREATMENT MODES UPON HARDENING STRESSES AND PROPERTIES OF D16 ALLOY
THERMAL TREATMENT IMPACT UPON STRUCTURE, PROPERTIES AND PHASE STRUCTURE OF STEEL 10G7M3S2AFTYU WELD WITH POWDER WIRE
DEVELOPMENT OF EXPERIMENTAL PLANT FOR SURFACE ALLOYING FROM ENVIRONMENT OF LOW-MELTING METAL MELTS
PHASE STRUCTURE CONTROL IN AUSTENITE STEELS DURING SURFACE STRENGTHENING BY HIGH-TEMPERATURE NITRIDE HARDENIN
ANALYSIS OF NITRIDE HARDENING AND TECHNOLOGY FOR SMALL-BATCH PRODUCTION
METALLOGRAPHIC ANALYSIS OF X2CRNIMOCUN25-6-3 STEEL AFTER ITS DIFFERENT THERMAL TREATMENTS
FACTORS OF QUALITY INCREASE IN PROTECTIVE CHROMIUM COATINGS ON ALUMINUM ALLOYS OBTAINED THROUGH PYROLYTIC PRECIPITATION
NICKEL ALLOY ADDITION IMPACT UPON STRUCTURE OF AL-10%TIC COMPOSITE
LOW-TEMPERATURE PEARLITE DISSOCIATION IN IRON-CARBON ALLOYS BY PERITECTOID TRANSFORMATION REACTION
INFLUENCE OF METAL POWDER PRODUCTION METHOD ON MICROSTRUCTURE AND FLUIDITY OF MAGNETICALLY ALLOY GRANULATE
MANUFACTURING FINE GRAPHITE POWDER WITH AC ELECTRIC SYNTHESIS
HARDENING OF A QUICK-SPEED STEEL TOOL THROUGH NITRATION PROCESS WITH NITROGEN CONTROLLED POTENTIAL
STRUCTURE AND PROPERTIES OF COMPOSITE LAYERS BY MEANS OF CVD COATING ANNEALING ON TOOL STEEL
DEVELOPMENT OF COMPOSITE MATERIAL BASED ON AK10M2N ALLOY AND STUDY OF ITS TRIBOTECHNICAL PROPERTIES
HARDENING OF STAMPED STEELS WITH METAL-CERAMIC COATINGS OBTAINED BY GAS NITRIDING
DRY MIX INFLUENCE OF ELECTROSLAG PROCESS ON AL-TI-B LIGATURE STRUCTURE IN COURSE OF ITS OBTAINING
INNER FRICTION OF CAST ALLOY WITH NICKEL-CHROME MATRIX AFTER THERMAL TREATMENT
TEMPERATURE STEPPED RAISING DURING FORMATION OF SOLID EPITAXIAL FILMS OF SUPERCONDUCTORS YBA2CU3O7-X TO INCREASE CURRENT CARRYING CAPACITY OF VTSP SECOND GENERATION BANDS
CRITERION MODEL OF CHEMICAL STABILITY UNDER STATIC CONDITIONS
Science intensive technologies in mechanical engineering
CALCULATION OF FUNCTIONAL NANOSTRUCTURES OF COATINGS, BASED ON MODELING OF THEIR SYNTHESIS
Volume, issue
1 № 1 Published
Authors
Kozhina T.
DOI
https://doi.org/10.12737/17315
Published
31.01.2016
Science intensive technologies in mechanical engineering
ANALYSIS OF DEFINITION AND PRINCIPLES OF COMPOSITE MATERIALS DEVELOPMENT
Volume, issue
1 № 2 Published
Authors
Kocheshkov I
DOI
https://doi.org/10.12737/17788
Published
28.02.2016
Science intensive technologies in mechanical engineering
BASIC TYPES OF MODERN MODIFIERS FOR CAST IRON AND STEEL
Volume, issue
1 № 3 Published
Authors
Davydov S.
DOI
https://doi.org/10.12737/18051
Published
31.03.2016
Science intensive technologies in mechanical engineering
HIGH TECHNOLOGIES IN INDUCTION MELTING IN INDUCTOR AND ELECTRO-MAGNETIC CRUCIBLE FURNACES
Volume, issue
1 № 3 Published
Authors
Levshin Gennady
DOI
https://doi.org/10.12737/18075
Published
31.03.2016
Science intensive technologies in mechanical engineering
ADDITIVE SYNERGIC TECHNIQUES OF LAYERED SYNTHESIS OF COMPOSITE PRODUCTS AT POWER FLOW INFLUENCE
Volume, issue
1 № 4 Published
Authors
Kheifets M.
DOI
https://doi.org/10.12737/18095
Published
30.04.2016
Science intensive technologies in mechanical engineering
THEORETICAL INVESTIGATION OF HIGH-SPEED HEATING PROCESS IN SURFACE LAYER OF GREY IRON
Volume, issue
1 № 6 Published
Authors
Semyonova Yuliya , Rakhimyanov Andrey , Nikitin Yuriy , Rakhimyanov Kharis , Eremina Anna
DOI
https://doi.org/10.12737/20132
Published
16.06.2016
Science intensive technologies in mechanical engineering
QUALITY INCREASE IN SURFACE LAYER OF WORKING CYLINDER FACE OF RECIPROCATING INTERNAL COMBUSTION ENGINES (ICE)
Volume, issue
1 № 6 Published
Authors
Provatar Aleksey , Dorokhov Aleksandr , Matveev Yuriy
DOI
https://doi.org/10.12737/20133
Published
16.06.2016
Science intensive technologies in mechanical engineering
CORROSION REASONS IN OIL-WELL TUBING OF OIL FIELDS AND THEIR LIFE TECHNOLOGICAL SUPPORT
Volume, issue
1 № 6 Published
Authors
Tyusenkov Anton , Cherepashkin S.
DOI
https://doi.org/10.12737/20134
Published
16.06.2016
Science intensive technologies in mechanical engineering
NANOTECHNOLOGIES IN MECHANICAL ENGINEERING
Volume, issue
1 № 7 Published
Authors
Shavrin Oleg
DOI
https://doi.org/10.12737/20593
Published
04.07.2016
Science intensive technologies in mechanical engineering
STRUCTURE FORMATION IN SURFACE LAYER OF MACHINE PARTS BY METHODS OF HIGH-VACUUM ANNEALING AND ION IMPLANTATION
Volume, issue
1 № 7 Published
Authors
Shalygin Mikhail
DOI
https://doi.org/10.12737/20594
Published
04.07.2016
Science intensive technologies in mechanical engineering
TECHNOLOGICAL FUNDAMENTALS OF NANO-STRUCTURED COMPOSITE SYNTHESIS BASED ON ALUMINUM ALLOYS
Volume, issue
1 № 8 Published
Authors
Kolmakov Aleksey , Senyut Vladimir , Kheyfets Mikhail , Vityaz Petr , Sobol Sergey
DOI
https://doi.org/10.12737/20790
Published
30.08.2016
Science intensive technologies in mechanical engineering
STRUCTURAL PECULIARITIES IN FIBROUS COMPOSITE WITH METAL MATRIX MANUFACTURED USING VARIOUS SHEET HALF-FINISHED PRODUCTS
Volume, issue
1 № 8 Published
Authors
Kocheshkov Igor
DOI
https://doi.org/10.12737/20799
Published
30.08.2016
Science intensive technologies in mechanical engineering
HIGH TECHNOLOGY TO REDUCE HYDROGEN WEAR OF WORK SURFACES OF FRICTION
Volume, issue
1 № 10 Published
Authors
Shalygin Mikhail
DOI
https://doi.org/10.12737/21421
Published
09.09.2016
Science intensive technologies in mechanical engineering
STRUCTURE SIMULATION OF FIBER-COMPOSITE MATERIAL MADE WITH USE OF DIFFERENT TYPES OF SHEET SEMI-PRODUCTS
Volume, issue
2017 № 1 (67) Published
Authors
Kocheshkov Igor
DOI
https://doi.org/10.12737/24205
Published
31.01.2017
Science intensive technologies in mechanical engineering
ON MELT MOTION IN INDUCTION CRUCIBLE FURNACE
Volume, issue
2017 № 4 (70) Published
Authors
Levshin Gennady
DOI
https://doi.org/10.12737/article_58ef809020aca5.67021741
Published
17.04.2017
Science intensive technologies in mechanical engineering
NUMERICAL SIMULATION OF HEAT EXCHANGE AT COOLING OF HIGH-TEMPERATURE METAL BLANK MADE OF STEEL CHGSN2A
Volume, issue
2017 № 9 (75) Published
Authors
Makarov Sergey , Dementiev V.
DOI
https://doi.org/10.12737/article_59ae90c53930e5.50040191
Published
05.09.2017
Science intensive technologies in mechanical engineering
COMPOSITE STRENGTH TECHNOLOGICAL INCREASE IN SHF ELECTROMAGNETIC FIELD
Volume, issue
2018 № 1 (79) Published
Authors
Zlobina Irina , Bekrenev Nikolay , Pavlov Sergey
DOI
https://doi.org/10.12737/article_5a5a44e7789f39.08085474
Published
14.01.2018
Science intensive technologies in mechanical engineering
PIPE HIGH-TEMPERATURE STRENGTH RESEARCH OF PYROLYSIS FURNACE
Volume, issue
2018 № 5 (83) Published
Authors
Tyusenkov Anton , Rubtsov Alexey , Mirkhaidarova Kamilla
DOI
https://doi.org/10.30987/article_5ad8d2928f4af3.41991916
Published
18.05.2018
Science intensive technologies in mechanical engineering
IRRADIATION CONDITION IMPACT UPON NANO-PARTICLE PARAMETERS OBTAINED THROUGH METHOD OF LASER ABLATION IN LIQUID
Volume, issue
2018 № 6 (84) Published
Authors
Tyulpanova Ekaterina , Melnikov Dmitriy , Kaveshnikova Nadejda , Golubenko Yuriy , Kalyonova Elizaveta
DOI
https://doi.org/10.30987/article_5b0e4111a4af99.94656008
Published
22.06.2018
Science intensive technologies in mechanical engineering
CALCULATED MODEL OF SLEEVE BEARING LUBRICATED WITH MELT IN TURBULENT CONDITIONS OF FRICTION
Volume, issue
2018 № 7 (85) Published
Authors
Lagunova Elena
DOI
https://doi.org/10.30987/article_5b31352a4c2976.03676284
Published
14.07.2018
Science intensive technologies in mechanical engineering
METHOD FOR NANO-POWDER DISPERSION DEGREE DEFINITION
Volume, issue
2018 № 7 (85) Published
Authors
Shestopalova Larisa
DOI
https://doi.org/10.30987/article_5b31352c5f54e4.53218296
Published
14.07.2018
Science intensive technologies in mechanical engineering
PREPARATORY STAGE EFFECTIVENESS INCREASE IN MANUFACTURING MACHINERY OF DISPERSED-STRENGTHENING POLYMERIC COMPOSITES
Volume, issue
2018 № 9 (87) Published
Authors
Notin Ilya
DOI
https://doi.org/10.30987/article_5b71326c992bf9.46166968
Published
01.10.2018
Science intensive technologies in mechanical engineering
GLOW DISCHARGE IMPACT UPON CHANGES IN NI3FE DISLOCATION STRUCTURE
Volume, issue
2018 № 9 (87) Published
Authors
Koneva Nina , Logvin Vladimir , Tereshko Irina , Sheptunov Sergey
DOI
https://doi.org/10.30987/article_5b71326c60cfe3.01351409
Published
01.10.2018
Science intensive technologies in mechanical engineering
SCIENCE INTENSIVE TECHNOLOGY FOR MANUFACTURING COMPOSITE POWDERS IN MAGNETIC VIBRATING LAYER
Volume, issue
2019 № 5 (95) Published
Authors
Vernigorov Yuriy , Lebedev Valeriy , Leletko Kirill , Shirin Andrey
DOI
https://doi.org/10.30987/article_5ca303087cba57.59333232
Published
19.05.2019
Science intensive technologies in mechanical engineering
AL-ALN NANO-STRUCTURAL ALUMINUM-MATRIX COMPOSITE MANUFACTURING BY POWDER METALLURGY METHOD
Volume, issue
2019 № 10 (100) Published
Authors
Amosov Aleksandr , Kuzina Antonina , Titova Yulia , Zakharov Dmitriy
DOI
https://doi.org/10.30987/article_5d6518cd3e1685.05045712
Published
29.10.2019
Science intensive technologies in mechanical engineering
PROPERTY PECULIARITIES OF CU NANO-PARTICLES OBTAINED BY METHOD OF LASER ABLATION IN DIFFERENT LIQUIDS
Volume, issue
2019 № 11 (101) Published
Authors
Bogdanov Aleksandr , Golubenko Yuriy , Taxants Marina
DOI
https://doi.org/10.30987/article_5d9dc9b8784ec3.62540837
Published
28.11.2019
Science intensive technologies in mechanical engineering
SELF-ORGANIZATION AND CONTROL OF STRUCTURAL-PHASE TRANSFORMATIONS OF MATERIALS FOR ENGINEERING PRODUCT QUALITY ASSURANCE
Volume, issue
2020 № 1 (103) Published
Authors
Kheyfets Mikhail
DOI
https://doi.org/10.30987/2223-4608-2020-2020-1-3-7
Published
29.01.2020
Science intensive technologies in mechanical engineering
IMPACT OF THERMAL TREATMENT MODES UPON STEEL 09G2S DURABILITY IN ENVIRONMENT WITH INCREASED CO2 VALUES
Volume, issue
2020 № 2 (104) Published
Authors
Koscheeva Anastasiya , Revyakin Viktor , Ioffe Andrey
DOI
https://doi.org/10.30987/2223-4608-2020-2020-2-3-9
Published
26.02.2020
Science intensive technologies in mechanical engineering
INNER STRESS ANALYSIS THROUGH METHODS OF X-RAY DIFFRACTOMETRY IN DEPOSITED METAL AND IN PERIWELD AREA BY ALLOY RARE-EARTH ELEMENTS
Volume, issue
2020 № 4 (106) Published
Authors
Stepanova Kseniya , Petrov Petr , Platonov Anatoliy
DOI
https://doi.org/10.30987/2223-4608-2020-4-3-8
Published
21.04.2020
Science intensive technologies in mechanical engineering
IMPACT OF THERMAL TREATMENT MODES UPON HARDENING STRESSES AND PROPERTIES OF D16 ALLOY
Volume, issue
2020 № 4 (106) Published
Authors
May Suan , Puchkov Yuriy , Plokhikh Andrey , Benarieb Iliyas
DOI
https://doi.org/10.30987/2223-4608-2020-4-9-17
Published
21.04.2020
Science intensive technologies in mechanical engineering
THERMAL TREATMENT IMPACT UPON STRUCTURE, PROPERTIES AND PHASE STRUCTURE OF STEEL 10G7M3S2AFTYU WELD WITH POWDER WIRE
Volume, issue
2020 № 5 (107) Published
Authors
Yeryomin Evgeniy , Losev Aleksandr , Ponomaryov Ivan , Borodikhin Sergey
DOI
https://doi.org/10.30987/2223-4608-2020-5-3-8
Published
18.05.2020
Science intensive technologies in mechanical engineering
DEVELOPMENT OF EXPERIMENTAL PLANT FOR SURFACE ALLOYING FROM ENVIRONMENT OF LOW-MELTING METAL MELTS
Volume, issue
2020 № 5 (107) Published
Authors
Mihaylov Andrey , Sivenkov Aleksey , Serdiuk Nikita , Pryakhin Evgeny
DOI
https://doi.org/10.30987/2223-4608-2020-5-9-14
Published
18.05.2020
Science intensive technologies in mechanical engineering
PHASE STRUCTURE CONTROL IN AUSTENITE STEELS DURING SURFACE STRENGTHENING BY HIGH-TEMPERATURE NITRIDE HARDENIN
Volume, issue
2020 № 6 (108) Published
Authors
Petrova Larisa , Sergeeva Alexandra
DOI
https://doi.org/10.30987/2223-4608-2020-6-3-11
Published
14.06.2020
Science intensive technologies in mechanical engineering
ANALYSIS OF NITRIDE HARDENING AND TECHNOLOGY FOR SMALL-BATCH PRODUCTION
Volume, issue
2020 № 6 (108) Published
Authors
Fedotova Anna
DOI
https://doi.org/10.30987/2223-4608-2020-6-12-15
Published
14.06.2020
Science intensive technologies in mechanical engineering
METALLOGRAPHIC ANALYSIS OF X2CRNIMOCUN25-6-3 STEEL AFTER ITS DIFFERENT THERMAL TREATMENTS
Volume, issue
2020 № 9 (111) Published
Authors
Mordasov Denis
DOI
https://doi.org/10.30987/2223-4608-2020-9-3-6
Published
15.09.2020
Science intensive technologies in mechanical engineering
FACTORS OF QUALITY INCREASE IN PROTECTIVE CHROMIUM COATINGS ON ALUMINUM ALLOYS OBTAINED THROUGH PYROLYTIC PRECIPITATION
Volume, issue
2020 № 10 (112) Published
Authors
Petrova Larisa , Alexandrov Victor , Morshchilov Maxim
DOI
https://doi.org/10.30987/2223-4608-2020-10-3-9
Published
30.10.2020
Science intensive technologies in mechanical engineering
NICKEL ALLOY ADDITION IMPACT UPON STRUCTURE OF AL-10%TIC COMPOSITE
Volume, issue
2020 № 10 (112) Published
Authors
Luc Al'fiya , Shipilov Sergey , Rybakov Anton
DOI
https://doi.org/10.30987/2223-4608-2020-10-10-15
Published
30.10.2020
Science intensive technologies in mechanical engineering
LOW-TEMPERATURE PEARLITE DISSOCIATION IN IRON-CARBON ALLOYS BY PERITECTOID TRANSFORMATION REACTION
Volume, issue
2021 № 2 (116) Published
Authors
Davydov Sergey , Filippov Rodion , Moroz Alexsandr
DOI
https://doi.org/10.30987/2223-4608-2021-2-3-13
Published
28.02.2021
Science intensive technologies in mechanical engineering
INFLUENCE OF METAL POWDER PRODUCTION METHOD ON MICROSTRUCTURE AND FLUIDITY OF MAGNETICALLY ALLOY GRANULATE
Volume, issue
2021 № 9 (123) Published
Authors
Kostin Dmitriy , Amosov Aleksandr , Samboruk Anatoliy , Chernyshev Bogdan , Kamynin Anton
DOI
https://doi.org/10.30987/2223-4608-2021-9-3-7
Published
04.10.2021
Science intensive technologies in mechanical engineering
MANUFACTURING FINE GRAPHITE POWDER WITH AC ELECTRIC SYNTHESIS
Volume, issue
2021 № 6 (120) Published
Authors
Kupriashov Andrei , Shestakov Ivan
DOI
https://doi.org/10.30987/2223-4608-2021-6-42-48
Published
30.06.2021
Science intensive technologies in mechanical engineering
HARDENING OF A QUICK-SPEED STEEL TOOL THROUGH NITRATION PROCESS WITH NITROGEN CONTROLLED POTENTIAL
Volume, issue
2022 № 1 (127) Published
Authors
Petrova Larisa , Alexandrov Vladimir , Vdovin Viktor , Demin Pyotr
DOI
https://doi.org/10.30987/2223-4608-2022-1-3-10
Published
28.01.2022
Science intensive technologies in mechanical engineering
STRUCTURE AND PROPERTIES OF COMPOSITE LAYERS BY MEANS OF CVD COATING ANNEALING ON TOOL STEEL
Volume, issue
2022 № 2 (128) Published
Authors
Belashova Irina , Petrova Larisa , Brezhnev Andrey
DOI
https://doi.org/10.30987/2223-4608-2022-2-3-10
Published
28.02.2022
Science intensive technologies in mechanical engineering
DEVELOPMENT OF COMPOSITE MATERIAL BASED ON AK10M2N ALLOY AND STUDY OF ITS TRIBOTECHNICAL PROPERTIES
Volume, issue
2022 № 2 (128) Published
Authors
Sherina Yuliya , Luc Al'fiya , Ibatillin Ildar
DOI
https://doi.org/10.30987/2223-4608-2022-2-11-16
Published
28.02.2022
Science intensive technologies in mechanical engineering
HARDENING OF STAMPED STEELS WITH METAL-CERAMIC COATINGS OBTAINED BY GAS NITRIDING
Volume, issue
2022 № 2 (128) Published
Authors
Demin Pyotr , Barabanov Sergey , Malakhov Alexsandr , Alexandrov Vladimir
DOI
https://doi.org/10.30987/2223-4608-2022-2-17-21
Published
28.02.2022
Science intensive technologies in mechanical engineering
DRY MIX INFLUENCE OF ELECTROSLAG PROCESS ON AL-TI-B LIGATURE STRUCTURE IN COURSE OF ITS OBTAINING
Volume, issue
2022 № 3 (129) Published
Authors
Safronov Nikolay , Kharisov Lenar , Fazlyev Marat
DOI
https://doi.org/10.30987/2223-4608-2022-3-3-9
Published
30.03.2022
Science intensive technologies in mechanical engineering
INNER FRICTION OF CAST ALLOY WITH NICKEL-CHROME MATRIX AFTER THERMAL TREATMENT
Volume, issue
2017 № 10 (76) Published
Authors
Vornacheva Irina , Gadalov Vladimir , Makarova Irina , Filonovich Alexander
DOI
https://doi.org/10.12737/article_59d496ed88af13.99343265
Published
04.10.2017
Science intensive technologies in mechanical engineering
TEMPERATURE STEPPED RAISING DURING FORMATION OF SOLID EPITAXIAL FILMS OF SUPERCONDUCTORS YBA2CU3O7-X TO INCREASE CURRENT CARRYING CAPACITY OF VTSP SECOND GENERATION BANDS
Volume, issue
2017 № 11 (77) Published
Authors
Kulikov Ivan , Krylova Tatyana , Chernykh Maria , Chernykh Igor , Zanaveskin Maksim
DOI
https://doi.org/10.12737/article_59f074a5b16728.41367086
Published
25.10.2017
Science intensive technologies in mechanical engineering
CRITERION MODEL OF CHEMICAL STABILITY UNDER STATIC CONDITIONS
Volume, issue
2017 № 10 (76) Published
Authors
DOI
https://doi.org/10.12737/article_59d496ee025461.04790377
Published
04.10.2017
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?